• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.1
• /
• pp.36-42
• /
• 2018

GGBFS(Ground Granulated Blast Furnace Slag)-replacement is very effective for improving resistance to chloride attack and this can induce a long service life for RC(Reinforced Concrete) structures exposed to chlorides. In the work, the design parameters such as cover depth, surface chloride content, critical chloride content, and replacement ratio of GGBFS are considered, and optimum replacement ratio of GGBFS are derived with intended service life. The changes of surface chloride content and cover depth show 3.16~3.38 and 3.02~3.34 times of service life variation, which are most influencing parameters. Critical chloride content shows 1.53~1.57 times of service life variation regardless of w/b(Water to Binder) ratios. In the case of surface chloride content $18.0kg/m^3$, the most severe condition, cover depth over 70 mm and GGBFS replacement ratio over 42% are required with concrete containing w/b ratio under 0.42 for 100 years of intended service life. The condition of $13.0kg/m^3$, GGBFS replacement over 35% is required. For reasonable durability design, quantitative exterior condition and critical chloride content should be determined, and the criteria in Domestic Specification is evaluated to be conservative.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.4
• /
• pp.349-360
• /
• 2017

In concrete construction work, formwork is an important process that accounts for 10% of the total construction cost. Recent buildings are becoming bigger and higher. In order to maximize the efficiency and safety of this formwork, the system of formworking has been systematized. However, the human accidents and the noise complaints arise from dismantling processes frequently occur. In order to solve these problems, most of them are dependent on foreign technology, but they do not take into consideration the conditions of domestic construction site. In this study, we developed a table type multi-drop system form for a slab and beam which can improve the process, safety and reduction of disassembly noise, and evaluated the physical properties of the main members which are used in the system. The results of this study show that there is sufficient strength to be used as a slab and a laying material for both a yoke beam and a supporting post. The noise level is improved compared to existing method.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.2
• /
• pp.31-38
• /
• 2016

In a construction project, the portion for maintenance costs for a building is considerable compared to the initial construction cost. As such, Life Cycle Cost (LCC) analysis is being increasingly utilized to assess the design value of engineering work in Korea. Additionally, the Public Procurement Service in Korea announced that it will be mandatory for all domestic construction projects to adopt BIM. Furthermore, the paradigm for architectural design has shifted from 2D to 3D, and to BIM, which includes a data management system. Within this background, however, there is currently no adequate BIM-based LCC analysis software and the requirements of cost estimation for repair and replacement cost for a building is not completely adequate in BIM tools such as Revit and Archicad. Therefore, this study suggests a process of cost estimation for repair and replacement (R&R) cost based on IFC data. First, we analyzed existing R&R criteria and defined BIM-based requirements when calculating R&R costs. These requirements were extracted from relevant IFC data. Subsequently, this was saved to a database and a BIM-based database was built for R&R cost estimation. Finally, this database was connected with external databases such as R&R Criteria DB and Cost Information DB to calculate R&R costs. This process is expected to improve upon the traditional process of cost estimation of R&R cost by applying a BIM model. The proposed process can contribute to a further standardizing of BIM-based LCC analysis thru application to initial construction costs, energy costs, and other maintenance costs.

• Journal of the Korean Society for Library and Information Science
• /
• v.46 no.2
• /
• pp.55-82
• /
• 2012

This study seeks to develop a curriculum operating model for Korean Library and Information Science, based on investigations into LIS curricula at home and abroad. Standard courses that can be applied to this model were also proposed. This study comprehensively analyzed the contents of domestic and foreign curricula and surveyed current librarians in all types of library fields. As a result, this study proposed required courses, core courses, and elective courses. Six required LIS courses are: Introduction to Library and Information Science, Information Organization, Information Services, Library and Information Center Management, Information Retrieval, and Field Work. Six core LIS courses are: Classification & Cataloging Practice, Subject Information Resources, Collection Development, Digital Library, Introduction to Bibliography, and Introduction to Archive Management. Twenty selective LIS courses include: the General Library and Information Science area (Cultural History of Information, Information Society and Library, Library and Copyright, Research Methods in Library and Information Science), the Information Organization area (Metadata Fundamentals, KORMARC Practice), the Information Services area (Information Literacy Instruction, Reading Guidance, Information User Study), the Library and Information Center Management area (Library Management, including management for different kinds of libraries, Library Information Cooperator, Library Marketing, Non-book Material and Multimedia Management (Contents Management), the Information Science area (Database Management, including Web DB Management, Indexing and Abstracting, Introduction to Information Science, Understanding Information Science, Automated System of Library, Library Information Network), and the Archival Science area (Preservation Management).

• Korean Journal of Animal Reproduction
• /
• v.19 no.4
• /
• pp.307-322
• /
• 1996

The corpus luteum (CL) is formed by the action of a surge of luteinizing hormone (LH) on the pre-ovulatory follicle. Luteal cells derived from granulosa and theca interna cells continue to secrete progesterone for about two weeks. LH in domestic animals is essential for the normal secretion of progesterone at all stages of the luteal phase. For this process in the rodents, 20$\alpha$-hydroxysteroid dehydrogenase (20$\alpha$-HSD) is indispensable. 20$\alpha$-HSD is an enzyme to be a biologically inactive steroid. This enzyme plays a critical role in the regulation of the rat luteal function and reported to be present in steroid-producing tissues such as the testis and adrenal gland. We have purified 20$\alpha$-HSD and found two distinct 20$\alpha$-HSD molecules (HSD-1 and HSD-2). Their molecular weights are both estimated to be 33kd.The amino acid compositions of HSD-1 and HSD-2 are mostly similar, but there is a slight difference in the content of lysine. We demonstrated that 1) CL of previous generations contribute more to whole ovarian 20$\alpha$-HSD activity, 2) newly formed corpora lutea contain only 20$\alpha$-HSD-1 activity, and 3) old CL express activities of each HSD isozyme as shown in the luteal tissue of cycling rats on the day of diestrus where only degenerating old CL exist. The increase in 20$\alpha$-HSD activity identified seems to be related to the increase in the numbers of 20$\alpha$-HSD-positive cells. Interestingly, 20$\alpha$-HSD-1 activities were strongly found in the follicle fluids and theca interna cells by immunohistochemical study. Thus, the activity of 20$\alpha$-HSD may be related to a survival mechanism of those luteal cells and follicles remaining in the ovaries. Luteal cells arise from two sources. The small luteal cells are all of theca cell origin, while the large luteal cells are mainly of granulosa cell origin. CL of Korean Native Cattle, as those of other animal species, contains two morphologycally and functionally distinct luteal cell populations, such as small and large luteal cells as well as nonluteal cells. In all reproductive states except in the late luteal phase, the bovine CL also contained more small luteal cells than large luteal cells. Luteal tissue secretes a variety of growth factors (proteins) and the pattern of secretion changes during all stages of the luteal phase. These growth factors could be important in regulating the function of the bovine corpus luteum and may act in a potential endocrine autocrine and paracrine mechanisms. Therefore, further work has to be done to elucidate the role of growth factors in the ovary, especially in the corpus luterum. Interest should be focussed on interaction of these growth factors in the regulation of luteal cell and the localization of cytokine synthesis in differnet luteal cells.

• Journal of the Korean Society of Radiology
• /
• v.12 no.5
• /
• pp.651-658
• /
• 2018

A foot pedal switch in the diagnosis x-ray radiography system has been researched to improve radiologic technologist works and patient satisfaction. The switch has been installed in the diagnosis x-ray radiography system used in domestic clinics. Quantitative evaluation has been conducted by measuring the exposure dose reproducibility test, tube voltage, mAs, and percentage average error. Qualitative evaluation has been conducted by analysis of the radiologic technologists questionnaire. In the quantitative evaluation for the use of the foot pedal switch, the coefficient of variation was less than 0.05 in the exposure dose reproducibility test. In the mAs test, percentage average error of ${\pm}20%$ was measured. There was no problem raised since it meets the all inspection standards of the diagnosis x-ray generator. In the qualitative evaluation, most of the opinions are that it has a clinical value for the foot pedal switch in the diagnosis x-ray radiography system. Therefore, developing the foot pedal switch for the diagnosis x-ray radiography system can improve effectively the rapidity and accuracy of the radiologic technologist work. In addition, it is effective in decreasing the x-ray exposure of patients and increasing satisfaction for the medical service due to reduction of retaking x-ray.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1612-1612
• /
• 2001

The production of grain for export and domestic use is one of Australia's most important agricultural industries, and the NIR technique has been used extensively over many years for the routine monitoring of grain quality, particularly moisture and protein content. Because most Australian grain is intended for human food production, the determinants of grain quality for livestock feed, apart from protein, have been largely ignored. However the increasing use of grain for feeding to pigs, poultry, beef cattle and dairy cows has led to an important national research project entitled “Premium Grains for Livestock”. Two of the objectives of this project are to determine the compositional and functional characteristics of grains which influence their nutritional quality for the various classes of livestock, and to adopt rapid and objective analytical tests for these quality criteria. NIR has been used in this project firstly to identify a set of grain samples from a large population of breeders' lines which showed a wide spectral variation, and hence a potentially wide variation in nutritional value. The selected samples were not only subjected to an extensive array of chemical, physical and in vitro analyses, but also were grown out to produce sufficient quantities of grain to feed to animals in vivo studies. Additional grains were also strategically selected from farms in order to include the effect of weather damage, such as rain, drought and frost. In this study to date, NIR calibrations have been derived or attempted, on both ground and whole grains, for in vivo dry matter digestibility (DMD), pepsin-cellulase dry matter disappearance, protein, fat, acid detergent fibre, neutral detergent fibre, starch, in sacco DMD and in vitro assays to simulate starch digestion in the lumen and small intestine. Results so far indicate high calibration accuracy for chemical components (SECV 0.3 to 2.6%) and very promising statistics for in vivo DMD (SECV 1.8, $R^2$ 0.93, SD 7.0, range 61.9 to 92.3, n=60). There appears to be some potential for NIR to estimate some in vitro properties, depending upon the accuracy of reference methods and appropriate sample populations. Current work is in progress to extend the range of grains with in vivo DMD values (a very laborious and expensive process) and to increase the robustness of the various NIR calibrations, with the aim of implementing uniform testing procedures for nutritional value of grains throughout Australia.

• The Journal of the Korea Contents Association
• /
• v.10 no.7
• /
• pp.317-325
• /
• 2010

This study aims to deduct the extensive improvement types of leisure activities of private security agents using PPA technique and to examine the influence of leisure constraint on the index of participation. Through this process, this study consequently will draw the priority list of investment on the policy for improving the welfare status of private security agents. In this study, judgement sampling was applied to 6 security agencies located in Seoul, 2010, and 267 cases were used in the final analysis. Collected data went through factor analysis, reliability analysis, paired t test, PPA analysis, and regression analysis by using SPSSWIN 17.0. The conclusions were drawn as follows. In regard to the reliability, Cronbach's $\alpha$ was over .768. First, there was a difference between the preference rate and the participation rate which are the participation index of the private security agents' leisure activities. concentrate here in leisure types turned out to be fitness activities, walking/jogging, tourism, a day-long travel, and keep up the cood work in leisure types are movies, domestic tourist attractions, dating, eating out, personal relationship, watching sports, reading, karaoke, TV video watching, drinking etc. low priority in leisure types are water sports, hiking, biking, soccer, photography, ball games, sky sports, playing go/janggi, inline skates, and cooking. Second, the leisure constraint affects the participation index of leisure activities. As the personal constraint, and surrounding conscious constraint which are the subordinate factors of the leisure constraint get bigger, the participation index of favored leisure activities become lower. In contrast, when the difficulties such as structural constraint, time and economical constraint are overcome, participation index of leisure activities go on the rise.

• Korean Security Journal
• /
• no.13
• /
• pp.1-21
• /
• 2007

This study aims to analysis and measure on the curriculum of security programs in Korean university as the private security system. Civil security demand social safety life by the police protection and private security system. The private security or the civil guards shows rapid growth by the social development and improve the quality of life. But the supply and training system have some limitations in spite of the high demand guard-secretary. The main role of secretaries has been to accompany superiors in order to maintain their dignity or trait. Then the secretaries are required to play additional roles of safety managers such as a security manager, a protocol manager, an intelligence manager and a protective driver in order to overcome the domestic and the international safety environment and to elevate the quality of service as a competitive work. So, the purpose of this article is to analyze current situation of civil body and security guard training industry and to seek an educational model. For that, we examine in 'Do the professional training organizations meet social demand for the body and security guards'? And, 'What kind of training has to be provide for the body and security guards'? and 'What the qualifications of the trainers'? Then, 'What are the differences in training courses between private organizations and universities'? 'Is there differences in the job placement among the trainers of private organizations and universities'? etc.. Conclusion, the social demand common curriculum for the body and security guard will be drawn from the analysis of diverse training organizations with different training courses in contents, training periods, educational value, and social aim. Then we have to a standard curriculum for the successful training education system to provide social security.

• Progress in Medical Physics
• /
• v.21 no.1
• /
• pp.120-125
• /
• 2010

For the measurements of an absorbed dose using the standard dosimetry based on an absorbed dose to water the variety of factors, whether big, small, or tiny, may influence the accuracy of dosimetry. The beam quality correction factor ${\kappa}_{Q,Q_0}$ of an ionization chamber might also be one of them. The cylindrical type of ionization chamber, the PTW30013 chamber, was chosen for this work and 9 chambers of the same type were collected from several institutes where the chamber types are used for the reference dosimetry. They were calibrated from the domestic Secondary Standard Dosimetry Laboratory with the same electrometer and cable. These calibrated chambers were used to measure absorbed doses to water in the reference condition for the photon beam of 6 MV and 10 MV and the electron beam of 12 MeV from Siemens ONCOR. The biggest difference among chambers amounts to 2.4% for the 6 MV photon beam, 0.8% for the 10 MV photon beam, and 2.4% for the 12 MeV electron beam. The big deviation in the photon of 6 MV demonstrates that if there had been no problems with the process of measurements application of the same ${\kappa}_{Q,Q_0}$ to the chambers used in this study might have influenced the deviation in the photon 6 MV and that how important an external audit is.