Journal of the Korea Institute of Building Construction (한국건축시공학회지)

The Korean Institute of Building Construction (한국건축시공학회)
권호 표지
DOI QR코드

DOI QR Code

An Experimental Study on the Performance and Field Application of Low Noise Beam-slab Formwork using Table Type Multi-stage Drop System

테이블형 다단 드롭 시스템을 이용한 저소음 보-슬래브 거푸집의 구성부재 성능 및 현장적용에 관한 실험적 연구

  • Received : 2017.04.25
  • Accepted : 2017.07.25
  • Published : 2017.08.20
Download PDF
⟨ Previous Next ⟩

Abstract

In concrete construction work, formwork is an important process that accounts for 10% of the total construction cost. Recent buildings are becoming bigger and higher. In order to maximize the efficiency and safety of this formwork, the system of formworking has been systematized. However, the human accidents and the noise complaints arise from dismantling processes frequently occur. In order to solve these problems, most of them are dependent on foreign technology, but they do not take into consideration the conditions of domestic construction site. In this study, we developed a table type multi-drop system form for a slab and beam which can improve the process, safety and reduction of disassembly noise, and evaluated the physical properties of the main members which are used in the system. The results of this study show that there is sufficient strength to be used as a slab and a laying material for both a yoke beam and a supporting post. The noise level is improved compared to existing method.

콘크리트 건축물 공사에 있어, 거푸집공사는 전체공사비의 10%를 차지하는 중요한 공정이다. 최근의 건축물은 대형화, 고층화가 이루어지고 있다. 이러한 거푸집공사의 고효율과 안전성을 위하여 거푸집공정의 시스템화가 이루어지고 있으나, 여전히 인명사고와 해체공정에서 발생하는 소음 민원이 빈번히 발생하고 있으며, 이러한 문제의 해결을 위하여 대부분 해외기술에 의존하여 국내 건설현장 여건을 고려하지 않는 관계로 외면되어 기존 거푸집 공법을 답습하고 있는 실정이다. 본 연구는 공정개선, 안전성 향상 및 해체소음 저감이 가능한 슬래브, 보 전용 테이블형 다단 드롭 시스템 거푸집을 개발하고 시스템 내에 사용되는 주요 부재인 장선 멍에와 동바리의 물성을 평가하고, 이 시스템의 현장 적용을 위한 해체공정에서의 소음을 기존 공법과 비교 평가하는 연구로서 실험결과, 멍에 빔과 동바리 모두 슬래브 및 보 타설용 가설재로 사용하기에 충분한 내력이 있는 것으로 나타났으며, 평균소음도가 기존 공법에 비해 10dB(A) 이상 저감되는 것으로 확인되었으며 타설 시의 처짐량을 측정한 결과, 기존 공법 대비 처짐이 저감되는 것을 확인하였다.

Keywords

References

  1. Go SS, Oh JH, A study on the risk assessment of formwork. Journal of the Korea Society of Safety. 2002 Sep;17(3):96-101.
  2. Kim JH. Study on developing the aluminum-plastic form to reduce the noise of the aluminum form work [master's thesis]. [Seoul (Korea)]: Korea University; 2017. p. 17-21.
  3. Lee SC, Jeon JY. Assesment of annoyance cause by different types of construction noises. Transactions of the Korea Society for Noise and Vibration Engineering. 2013 Dec;23(12):1111-6. https://doi.org/10.5050/KSNVE.2013.23.12.1111
  4. Yang YS, An appropriate use plan by structural system of conventional and system forms[master's thesis]. [Seoul (Korea)]: Chung-Ang University; 2007. p. 14-26.
  5. Oh KG. Slab formwork method using single-drop type yoke with span adjustment(Korea Construction Transport New- Technology)[Internet]. Anyang(Korea): Korea Agency for Infrastructure Technology Advancement; 2016 Mar [cited 2017 June 20]. Available from: http://ct.kaia.re.kr/ntecsite/.
  6. Jung WJ, Song SY, Ryu HS, Song DY. Drop-table-type multi-stage noise reduction of reinforced concrete floor height more than 4.2m using a system-type slab formwork. Magazine of the Korea Institute for Structural Maintenance and Inspection. 2016 Dec;20(4):49-51.
  7. Kang JS, Lee SJ, Song JW, Won YH, Choi SM. Experimental study on pre-cambered unshored deck for 7.5m span structures. Journal of the Korean Society for Advanced Composite Structures. 2016 Jun;7(2):7-15.
  8. Shin YS, Choi HB, Lee UK, Ann SH, Kang KI. A study on selection of slab form work system for high - rise building construction. Journal of the Architectural Institute of Korea Structure & Construction. 2006 Feb;22(2):147-54.
  9. Song H, Park HG, Go SS. A study on the analysis of accident cause of form work using FTA(Fault Tree Analysis) system. Journal of the Architectural Institute of Korea Structure & Construction. 2006 Jun;22(6):119-27.
  10. Kim GH, Kang KI. A study on development and application of the unit table form for concrete structural frame work of high-rise buildings. Journal of the Architectural Institute of Korea Structure & Construction. 2003 Aug;19(8):181-8.
  11. Kang KI. System form and hoisting technology in high-rise buildings. Magazine of the Korea Concrete Institute. 2016 Jan;28(1):10-1.
  12. Shin SH, Ryu HS, Kim DM, Sim SJ, Jeong WJ. Experimental study on the noise evaluation for removal of the table type multi-drop system. Proceedings of the Korea Concrete Institute; 2016 Nov 2-4; Gangwon, Korea. Seoul (Korea):Korea Concrete Institute; 2016. p. 583-4.
  13. Ryu HS, Shin SH, Kim DM, Sim SJ, Jeong WJ. Experimental study on the characteristics of materials for development of the table type multi-drop system. Proceedings of the Korea Concrete Institute. 2016 Nov 2-4; Gangwon, Korea. Seoul (Korea): Korea Concrete Institute; 2016. p. 585-6.
  14. Kang SH, Hong SG. Structural behavior of ultra high performance fiber reinforced concrete-reinforced concrete composite slab subjected to bending. Proceedings of the Korea Concrete Institute. 2013 May 14-16; Yeosu, Korea. Seoul (Korea): Korea Concrete Institute; 2013. p. 497-8.
  15. Kim BS, Park JM, Oh BH, Kim OK, Choi BJ. Improvement of safety certification system by aluminum form on construction temporary equipment. Proceedings of the Architectural Institute of Korea. 2011 Oct 29; Gyeongsan, Korea. Seoul (Korea): Architectural Institute of Korea; 2011. p. 271-2.