• Korean Journal of Plant Tissue Culture
• /
• v.28 no.5
• /
• pp.273-276
• /
• 2001

In order to develop effective acclimatization methods for Aralia elata plantlets regenerated from somatic embryos, various acclimatizing conditions were compared regarding both survival rate and growth of the plantlets. The plantlets were transplanted into plastic boxes containing artificial soil in the presence of either several levels of MS liquid media, distilled water, 2% sucrose or 0.1% hyponex solution. They were then cultured by spraying of distilled water twice a week and maintained in the normal tissue culture room. Perlite was proved to be better than vermiculite on survival rate and growth of the plantlets. As the size of perlite (larger than 0.2 cm in diameter) increased, both the survival rate and growth of the plantlets improved. Among the various MS liquid media and different aqueous solutions tested, distilled water appeared to result in the best survival rate and growth. MS media were also effective in increasing survival rate and supporting growth when diluted to 1/4 and/or 1/8. The acclimatized plantlets could be transplanted directly onto the nursery bed and grown normally. The above results suggest that plantlets regenerated from somatic embryos of Aralia elata be effectively acclimatized using a plastic box containing perlite with distilled water treatment.

• Korean Journal of Veterinary Service
• /
• v.39 no.2
• /
• pp.81-86
• /
• 2016

Honeybee venom (BV) from Apis mellifera L. has been used as natural antimicrobial compounds in pigs, cows, dairy cattle and chicken farms in Korea. The purpose of this study was conducted to confirm homogeneity and stability of BV dissolved with distilled water or saline solution. Melittin was analyzed with ultra-high performance liquid chromatography (UPLC) for BV to secure the validation of analysis. BV at concentration of 1 mg/mL was dissolved with distilled water or saline solution at room temperature. Homogeneity of BV dissolved with distilled water or saline solution at upper, milddle, and lower layers all satisfied the accuracy and precision criteria. Stability of BV dissolved with distilled water or saline solution for 7 days all satisfied the criterion both light and dark storage condition. BV has satisfied with homogeneity and stability in distilled water or saline solution at room temperature under light or dark condition. The results of this study suggest that BV has a possibility as the substitute of natural antimicrobial agents for the animal drugs and feed additives.

• The Journal of Korean Physical Therapy
• /
• v.12 no.2
• /
• pp.57-67
• /
• 2000

The purpose of this study was carried out in five rabbits of 3kg to investigate the change of superficial and deep heats in ultrasound application by coupling media. Temperature measured with thermistor needle at skin. subcutaneous, muscle in before coupling media application, after coupling media application. 2minutes. 5minutes, 7minutes, 10minutes. Coupling media was used gel, glycerin, distilled water. The data was analyzed using spss/pc+and t-test The results were as fallow : 1. With skin. gel was significant temperature change in 2minutes(p<.05). glycerin was significant temperature change in 2minutes(p<.05), 5minutes(p<.05), 7minutes(p<.01), 10minutes(p<.01). distilled water was significant temperature change in post coupling media(p<.05), 2minutes(p<.01). 5minutes(p<.05). 7minutes(p<.01). 10minutes(p<.01). With subcutaneous. gel was no temperature change. glycerin was significant temperature change in 2minutes(p<.05), 5minutes(p<.05), 10minutes(p<.01). distilled water was no temperature change. With muscle. gel was no temperature change. glycerin was significant temperature change in 2minutes(p<.05). 5minutes(p<.05). 7minutes(p<.05). 10minutes( p<.05). distilled water was significant temperature change in 10minutes(p<.05). 2. Superficial heats of skin and subcutaneous was higher temperature change than Deep heats of muscle. 3. Gel. glycerin. distilled Water required minimum treatment 10minutes fur thermal effect. 4. Gel was low temperature change superficial and deep heats. and glycerin was high temperature change superficial and deep heats. This results show that gel is high transmissiveness in the coupling media and glycerin is low transmissiveness in the coupling media.

• Journal of Energy Engineering
• /
• v.8 no.4
• /
• pp.576-582
• /
• 1999

this paper presents the results of experiments on subsooling degree characteristics which was analyzed in accordance with various test conditions. The test water was cooled below freezing point temperature, was measured. The results showed that using city water as the test water in pyrex tube indicated small standard deviation (SD) compared to using distilled water, and minimum subcooling degree was 6.9$^{\circ}C$ and 6.2$^{\circ}C$, respectively. In addition, a critical subcooling degree in a pyrex tube was larger than that in a stainless steel tube about 0.7$^{\circ}C$ for the same test water. It was also observed that the standard deviation of data for the distilled water showed decreasing tendency aw the increasing with cooling velocity. Then metaldehyde showed a considerable effect on the subcooling degree of distilled water as the ice nucleating substance with increase of test number.

• Food Science and Biotechnology
• /
• v.17 no.3
• /
• pp.637-641
• /
• 2008

This study investigated the heat stability of L-ascorbic acid (AA) in acetic acid solution. To analyze the degradation of AA using high performance liquid chromatography (HPLC), AA was measured at a wavelength of 244 nm in acetic acid and 265 nm in distilled water. During the storage of AA in acetic acid or distilled water at $37^{\circ}C$, degradation of AA was slower in acetic acid than in distilled water. On examining various ratios of AA to acetic acid, the stability of AA at $100^{\circ}C$ for 30 min was the highest when the concentration of acetic acid was 10 times higher than the concentration of AA. After acetic acid was added into AA degraded by heating, the AA is stabilized by reheating. Ultimately, these results indicate that degraded AA is reduced by hydrogen ions dissociated from acetic acid, and the rate of reduction of degraded AA in acetic acid solution is improved with heat processing.

• Journal of Korean Academy of Nursing
• /
• v.5 no.1
• /
• pp.87-92
• /
• 1975

This study was performed from July to December 1974 to investigate the rates of contamination of distilled water for injection and local anesthetics. 222 vials were sampled from 7 different places of St. Mary's Hospital The samples were cultured for isolation of microorganisms. The results were as follows; 1. Of 222 vials, 11 were Contaminated by 6 types: Staphylococcus epidermis, Bacillus subtilis, Mima polymorph a, Alcaligenes faecalis, Herellea vaginicala and pepto- streptococcus. 2. 5(9.1 %) of 55 vials from surgical wards, 2 (4.2 %) of 48 vials from surgical OPD, and 4 (12,l %) of 33 vials from pediatric wards were contaminated 3. Between rates of contamination of distilled water for injection and local anesthetics and the number of punctures, there was no significant relationship. (CR=1.42 P〉0.1) 4. There was no significant relationship (CR=1.02 P〉0.1) between the rates of contamination of vials and the duration of the first and the last punctures. 5. The ratios of contamination between 75% alcohol and 2% phenol used for disinfection of rubber lids of vials did not show significant difference.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.5
• /
• pp.181-187
• /
• 2000

Fatigue tests under acid fog environment were carried out to investigate the effect of acid fog on the corrosion fatigue strength of SM55C in comparison with distilled water. Main results obtained are as follows. The fatigue strength of SM55C under acid fog environment are remarkably decreased as compared with that of distilled water specimen. The corrosive effect of acid fog on fatigue strength are more serious under low stress amplitude level than under high stress amplitude level, and this leads to continuous reduction of fatigue strength. Under acid fog environment in early stage of crack growth. because the corrosive components dissolve the crack face offensively. the unstable fracture surface appears. But, the stable corrosion precipitation and products layer are formed on the fracture surface in accordance with the time pass.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.4
• /
• pp.340-347
• /
• 2008

Dissolution process of serpentine in distilled water was systematically investigated for study on pre-treatment of serpentine which was a candidate material for carbon dioxide sequestration. The metallic ions(Ca, Si, Mg etc.) were dissolved in distilled water at ambient condition and their concentrations were changed with dissolution time. The precise evaluation of dissolution process for serpentine dissolved solvent was performed by ion conductivity and pH measurement. Serpentine dissolution in distilled water was evaluated as a stable pre-treatment process without changes of crystallographic structure and chemical structure changes.

• YAKHAK HOEJI
• /
• v.34 no.3
• /
• pp.192-198
• /
• 1990

Three sugar glass dispersions of sulfamerazine were prepared using dextrose, galactose and sucrose as the carriers, with the ratio of the drug to the carrier was 1:9. The chemical stability of sulfamerazine in the glass dispersion system was studied using TLC. TLC revealed no additional spot and there was good correspondence with the Sulfamerazine itself. While time required to dissolve 50%($T_{50%}$) of sulfamerazine powder was 390 min that of dextrose glass dispersion system was 1.5 min. and galactose system was 4.0 min. in distilled water. 23) $T_{50%}$ of physical mixture with dextrose, galactose and sucrose were 26.4 min., 26.5 min., and 26.0 min. respectively in distilled water. $T_{50%}$ of control was 54 min. and those of all of the glass dispersion systems were within 1 min. in 0.1N HCl. The dissolution rates of sulfamerazine from sugar glass dispersion system in distilled water was greater than that in 0.1N HCl.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.53-54
• /
• 2015

This study is conducted to investigate the characteristics of cracks depending on the different mixture rates of calcium hydroxide and distilled water in high-strength concrete, which is substituted with a high percentage of blast-furnace slag, by using specimens produced under different heating temperatures: 600℃, 800℃, and 1000℃, respectively. According to the results of the study, the specimen heated under the temperature of 600℃ did not produce cracks; the specimen heated under 800℃ produced little cracks and showed no difference between calcium hydroxide and distilled water; whereas the specimen heated under 1000℃ produced cracks larger than 5mm on average in the case of calcium hydroxide, compared to distilled water.