• 한국수소및신에너지학회논문집
• /
• 제14권3호
• /
• pp.258-267
• /
• 2003

A new kind of oxygen carrier material is tested for chemical-looping combustion. NiO, CoO, $Fe_2O_3$ is chosen as metal oxide and YSZ as a binder. Hydrogen fuel is reacted with metal oxide (reduction of metal oxide) and then the reduced metal is successively oxidized by air. Dissolution method is examined to prepare the oxygen carriers. The effects of reaction temperature are measured by a TGA, mechanical strength and regenerability after 10 cycle are examined. $Fe_2O_3/YSZ$ oxygen carrier is bested in mechanical strength and we consider that NiO/YSZ after 3rd cycle are good oxygen carrier in according to reactor design.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제25권1호
• /
• pp.75-79
• /
• 2012

Low-melting-temperature agarose gel solution, as a novel porogen was combined with a silk fibroin solution to generate interconnected porous networks. The porosity of the resultant silk fibroin-agarose scaffolds was greater than that of the scaffolds generated with agarose and deionized water. The porosities of silk fibroin scaffolds containing agarose gel at 0.5%, 1.0%, 1.5%, 2.0% [w/v] were 110.9%, 111.7%, 120.9%, and 123.0%, respectively. Lastly, the internal space generated in scaffolds after dissolution of the agarose gel provides a good environment for cell growth and movement within the scaffold.

• Environmental Engineering Research
• /
• 제15권1호
• /
• pp.35-40
• /
• 2010

Bung Boraphet is the largest freshwater reservoir in Thailand. This study examined the accumulation of copper (Cu) and lead (Pb) in water, sediment and tissues of Asian clams (Corbicula sp.) within Bung Boraphet to assess the possible polluting effect of soil erosion and the dissolution of water soluble salts from the Nan River. Samples were collected from 12 study sites within Bung Boraphet between February and December 2008. The physicochemical parameters of the water including temperature, pH, turbidity, ammonia nitrogen, nitrate nitrogen, orthophosphates, biochemical oxygen demand, dissolved oxygen, Cu, and Pb were measured. The water in Bung Boraphet was found to be medium clean according to the surface water quality standard of Thailand. The levels of Cu and Pb in the water were low but heavy metals were detected at higher levels in the sediment and tissues of Corbicula sp. In the near future, management practices and regulator approaches for Cu and Pb contamination will be needed to protect the water in Bung Boraphet.

• 자원환경지질
• /
• 제24권3호
• /
• pp.219-226
• /
• 1991

High quality quartz crystals are grown in 0.5N NaOH + LiOH solution on the seed crystal at $370-395^{\circ}C$ and $1200-1300kg/cm^2$ condition. Growth rates are determined by the crystal thickness grown on the seed crystals with Z(0001) and X($11\bar{2}0$) direction. Relatively high growth rate of Z(0001) direction gradually changes as the temperaure difference (${\Delta}$ Ti) between growth and dissolution zones from 25 to $10^{\circ}C$. The X axis direction is affeced by ${\Delta}$ Ti, and +X($11\bar{2}0$) direction shows a high growth rate than -X($\bar{1}\bar{1}20$) direction. According to the variation with kinds of solutions used, the crystal growth that in NaOH solution is found to be slower than that in $Na_2CO_3$ solution. However, for the case in the NaOH solution mixed with LiOH, it shows a favorable growth rate in terms of grown crystal quality.

• 한국재료학회지
• /
• 제27권12호
• /
• pp.672-678
• /
• 2017

In the production of zirconium cladding tube, a pickling acid solution is used to remove surface contaminants, which generates tons of pickling acid waste. The waste pickling solution is a valuable resource of Hf-free Zr. Many studies have investigated separating the Hf-free Zr source from the waste pickling acid. The results showed that $Ba_2ZrF_8$ precipitates prepared from the waste pickling acid were useful as an electrolyte for the electrorefining of Zr in molten salt. In the present work, electrorefining was performed in a $Ba_2ZrF_8-LiF$ binary electrolyte to recover Zr from a Hf-free CuZr ingot anode prepared by electroreduction. Before electrorefining, two pretreatments are performed. First, electrolyte melting was carried out to determine the eutectic temperature, and second, the electrolyte was treated to eliminate impurities, mainly hydride. After electrorefining, the cathode deposits were analyzed by $O_2$ gas analyzer and SEM-EDX to explore the possibility of recovering nuclear-grade Zr metal. Moreover, the anode was analyzed by SEM-EDX to determine the Zr dissolution depth.

• Journal of Welding and Joining
• /
• 제16권3호
• /
• pp.157-166
• /
• 1998

Recently as environmental pollution caused by Pb has posed a serious threat to the global environment, the trend to regulate the usage of Pb in electronic industry is one the rise. Currently, the solder alloy with high Pb content, Sn-37%Pb, is utilized in the electronic assembly therefore, the objective of this study is to develop an alternative solder alloy for the existing Sn-37%Pb solder alloy. First thing, this work choosed Sn-5%Pb-1.5%Ag, Sn-5%Pb-1.5%Ag-x%Bi(x=1~5%) for candidate solder alloys, and examined their properties such as melting range, wettability, microhardness, tensile property, oxidation behavior and microstructure. Wettability was on the same level of Sn-37%Pb. Dissolution of Pb ion in Sn-5%Pb solder was 0.46ppm. This solder alloy revealed cellular dendrite microstructure $\beta$-Sn matrix, Pb-rich phase, Ag/Sn, and Cu/Sn Intermetallic compounds. The range of solidification temperature was within 3$0^{\circ}C$. Also these alloy displayed higher tensile strength and lower elongation than Sn-37%Pb. The resistance of oxidation in Sn-5%Pb-1.5%Ag solder alloy was superior to that of Sn-37%Pb solder alloy. But that of Sn-5%Pb-1.5%Ag-5%Bi solder alloy was equal to that of Sn-37%Pb solder alloy.

• ALGAE
• /
• 제28권4호
• /
• pp.355-363
• /
• 2013

The coralline alga, Corallina officinalis, is a widely distributed intertidal species in temperate coastal regions. It is usually exposed to high fluctuations of light intensity, light quality, temperature, and desiccation, all of which affect the temporal and spatial distribution as well as the morphology and the metabolism of this alga. In laboratory experiments we examined the effects of different light intensities (50, 100, and 200 ${\mu}mol$ photons $m^{-2}s^{-1}$) on photosynthesis, calcification, photosynthetic pigment contents (chlorophyll a and carotenoids), and growth rate of C. officinalis to clarify its photoacclimation strategies. Net photosynthesis, calcification and dissolution rates based on weight were not sensitive to irradiance. Although, photosynthesis and calcification did not clearly respond to light intensity, photosynthetic pigment contents were significantly lower at higher light intensities. In addition, higher irradiances induced significant enhancement of gross photosynthesis based on chlorophyll a. As a result, the specific growth rate was significantly stimulated by high light intensity. Our results suggest that photoacclimation of C. officinalis to different light conditions may be regulated to optimize growth.

• 반도체디스플레이기술학회지
• /
• 제9권2호
• /
• pp.49-54
• /
• 2010

We have successfully synthesized $CeO_2$ nanopowders by means of the hydrothermal method, in a low temperature range of $100-200^{\circ}C$. In order to investigate the structure and morphology of the nanopowders, scanning electron microscopy and X-ray diffraction have been employed. In addition, for exploring the optical properties, Raman spectroscopy, Fourier transform infrared spectroscopy, and photoluminescence spectroscopy have been used. In the optimized condition, with the pH, velocity, and time of 4.5, 600 rpm, and 60 h, the $CeO_2$ nanopowders with a diameter ranging from 50 to 150 nm have been synthesized. The nanopowders exhibited the visible emission mainly in the blue region. With comparing the reaction time, it is revealed that the extinction of functional groups at 60 h contributed to the growth and homogenization of the $CeO_2$ powders. Since the overgrowth and agglomeration of nanopowders were found, we suggest that the cracking/growth process is more favorable mechanism than the dissolution/precipitation process.

• 방사성폐기물학회지
• /
• 제19권3호
• /
• pp.323-330
• /
• 2021

Silver tellurite glasses with melting temperature of approximately 700℃ were developed to immobilize ¹²⁹I wastes. Long-term dissolution tests in 0.1 M acetic acid and disposability assessment were conducted to evaluate sustainability of the glasses. Leaching rate of Te, Bi and I from the glasses decreased for up to 16 d, then remained stable afterwards. On the contrary, tens to tens of thousands of times more of Ag was leached in comparison to the other elements; additionally, Ag leached continuously for all 128 d of the test owing to the exchange of Ag⁺ and H⁺ ions between the glasses and solution. The I leached much lower than those of other elements even though it leached ~10 times more in 0.1 M acetic acid than in deionized water. Some TeO₄ units in the glass network were transformed to TeO₃ by ion exchange and hydrolysis. These silver tellurite glasses met all waste acceptance criteria for disposal in Korea.

• Journal of Electrochemical Science and Technology
• /
• 제14권3호
• /
• pp.272-282
• /
• 2023

Ni-rich layered oxides cathode has recently gained attention as an advanced cathode material due to their applicable energy density. However, as the Ni component in the layered site is increased, the high reactivity of Ni⁴⁺ results in parasitic reaction associated with decomposing electrolyte, which leads to a rapid decreasing the lifespan of the cell. The electrolyte additive triallyl borate (TAB) improves interfacial stability, leading to a stable cathode-electrolyte interphase (CEI) layer on the LNCM83 cathode. A multi-functionalized TAB additive can produce a uniformly distributed CEI layer via electrochemical oxidation, which implies an increase in long-term cycling performance. After 100 cycles at elevated temperature, the cell tested by 0.75 TAB retained 88.3% of its retention ratio, whereas the cell performed by TAB-free electrolyte retained 64.1% of its retention. Once the TAB additive formed CEI layers on the LNCM83 cathode, it inhibited the decomposition of carbonate-based solvents species in addition to the dissolution of transition metal components from the cathode. The addition of TAB to LNCM83 cathode material is believed to be a promising way to increase the electrochemical performance.