• 공업화학
• /
• 제21권5호
• /
• pp.500-504
• /
• 2010

다중벽 탄소 나노튜브(Carbon nanotube, MWNTs)의 우수한 전기적 기계적 특성과 폴리우레탄의 우수한 기계적 물성을 이용하여 우수한 전기 전도성 복합체를 제조하기 위하여 말단기가 polyurethane로 기능화 된 탄소 나노튜브(PU-g-MWNTs)를 제조하였다. 말단기에 형성된 폴리우레탄과 고분자 메트릭스 간의 상용성으로 인한 계면 접합력으로 인해 기능화된 CNT 복합체 기능화 되지 않은 CNT에 비해 우수한 분산성을 나타내었다. PU-g-MWNT/PU 복합체의 전기 전도성을 PU-g-MWNT의 농도에 따라 측정하였으며 percolation threshold 이론에 의해 해석하였다. 그 결과 PU-g-MWNT/PU 복합체의 전기전도성은 임계농도 0.78 wt%과 임계지수 0.945를 가짐을 확인하였다.

• 한국재료학회지
• /
• 제19권3호
• /
• pp.156-162
• /
• 2009

Lubricant-based nanofluids were prepared by dispersing carbon nanoparticles in gear oil. In this study, the effects of the particle size, shape and dispersity of the particles on the tribological properties of nanofluids were investigated. Dispersion experiments were conducted with a high-speed bead mill and an ultrasonic homogenizer, and the surfaces of the nanoparticles were simultaneously modified with several dispersants. The effective thermal conductivity of the nanofluids was measured by the transient hot-wire method, and the tribological behaviors of the nanofluids were also investigated with a disk-on-disk tribo-tester. The results of this study clearly showed that the combination of the nanoparticles, the deagglomeration process, the dispersant and the dispersion solvent is very important for the dispersity and tribological properties of nanofluids. Lubricant-based nanofluids showed relatively low thermal conductivity enhancement, but they were highly effective in decreasing the frictional heat that was generated. For nanofluids containing 0.1vol.% graphite particles in an oil lubricant, The friction coefficient in the boundary and fluid lubrication range was reduced to approximately 70% of the original value of pure lubricant.

• 대한화장품학회지
• /
• 제30권2호
• /
• pp.189-195
• /
• 2004

카본 블랙은 매우 낮은 밀도로 화장품에는 사용되지 않고 있지만 독성이 없고 안정한 물리적 특성과 검은색의 특성으로 이용 가치가 있다고 사료되는 바이다. 본 연구에서는 TEOS, a) PEO/ lecithin, b) PEO/polyethylene glycol, c) lecithin/polyethylene을 ethanol/water 수용액상에서 계면활성제를 탄화시켜 sol-gei반응에 의해 meso-porous silica샘플을 얻었고 N2 조건하 50$0^{\circ}C$에서 열처리된 organic-inorganic hybrid silica를 합성하였다. Pore안에 카본 블랙을 함유하는 meso-porous silica는 친수성, 소수성 용매에서 모두 좋은 분산성을 보여준다. 이 샘플은 BET에 의해 specific surface area (750$m^2$/g)과 pore size (4-6 nm)이고, XRD측정으로 pore structure (cylindrical type)를, 샘플의 SEM촬영으로 morphology(0.1-0.5$\mu\textrm{m}$ 입자 크기를 갖는 spherical powder)를 갖는다는 것을 알아냈다. 이렇게 합성한 카본-실리카 블랙 컬러를 마스카라에 적용하면 일반적으로 마스카라에 사용되던 블랙 컬러 사용시 보다 좀더 검은색을 보여주는 것은 물론이고 우수한 분산성도 갖는다. 무엇보다 이 파우더의 밀도 조절이 가능하여 마스카라 뿐 만 아니라 모든 화장품에의 사용이 가능하다.

• 공업화학
• /
• 제17권4호
• /
• pp.403-408
• /
• 2006

가시광선 중합형의 고분자계 치아수복재의 고기능화를 위해 충전제로 사용된 친수성의 실리카 나노입자 표면을 $\gamma$-methacryloxypropyltrimethoxysilane ($\gamma$-MPS) 결합제로 소수성 처리하여 치아수복용 고분자 복합체를 제조하였다. 처리된 실리카의 구조적 물성과 복합체 내에서의 분산도 및 복합체의 중합 특성 등을 실리카의 소수화도와 비교하여 고찰하였다. 그 결과, 사용된 $\gamma$-MPS의 양이 40 wt%까지 증가함에 따라 실리카의 소수화도가 증가하였으며 그 이상에서는 큰 변화가 없었다. 또한 소수화도가 향상됨에 따라 복합체 내에서의 충전제 분산도가 양호하였으며 광중합 후 미반응 단량체는 핵자기공명 분석 결과 거의 남아 있지 않아 중합 특성이 우수함을 확인하였다.

• Korean Chemical Engineering Research
• /
• 제53권6호
• /
• pp.703-708
• /
• 2015

나노충전제의 우수한 분산성을 얻기 위하여 다중벽 탄소나노튜브(multiwall carbon nanotubes) (MWCNTs)와 poly(propylene gylcol)(PPG)을 ball mill shaker로 혼합한 분산액을 이용하여 폴리우레탄(PU) 나노복합체를 제조하였다. MWCNTs는 과산화수소($H_2O_2$)로 처리하여 표면을 기능화할 수 잇었다. 순수한 MWCNTs를 이용한 PU 나노복합체와 비교한 결과 $H_2O_2$로 처리한 MWCNTs를 이용한 PU 나노복합체의 인장강도와 신율이 높게 나타났다. SEM 이미지에서 보여진 MWCNTs의 우수한 분산성은 표면을 기능화시킴으로서 얻어진 것이다. Carbon black(CB)을 사용한 PU 복합체는 기계적 물성 변화가 거의 없었다. 분산시간의 증가에 따라 PU/MWCNTs 나노복합체들의 인장물성이 상승되었다. 결과적으로 나노충전제의 분산성 향상이 PU/MWCNTs 나노복합체의 인장물성 증가를 가져온 것을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제21권9호
• /
• pp.835-843
• /
• 2008

We have fabricated the source-drain electrodes for OTFTs by screen printing method and manufactured Ag pastes as conductive paste. To obtain excellent conductivity and screen-printability of Ag pastes, the dispersion characteristics of Ag pastes prepared from two types of acryl resins with different molecular structures and Ag powder treated with caprylic acid, triethanol amine and dodecane thiol as surfactant respectively were investigated. The Ag pastes containing Ag powder treated with dodecane thiol having thiol as anchor group or AA4123 with carboxyl group(COOH) of hydrophilic group as binder resin exhibited excellent dispersity. But, Ag pastes(CA-41, TA-41, DT-41) prepared from AA4123 fabricated the insulating layer since the strong interaction between surface of Ag powder and carboxyl group(COOH) of AA4123 interfered with the formation of conduction path among Ag powders. The viscosity behavior of Ag pastes exhibited shear-thinning flow in the high shear rate range and the pastes with bad dispersion characteristic demonstrated higher shear-thinning index than those with good dispersity due to the weak flocculated network structure. The output curve of OTFT device with a channel length of 107 ${\mu}m$ using screen-printed S-D electrodes from DT-30 showed good saturation behavior and no significant contact resistance. And this device exhibited a saturation mobility of $4.0{\times}10^{-3}$ $cm^2/Vs$, on/off current ratio of about $10^5$ and a threshold voltage of about 0.7 V.

• 한국재료학회지
• /
• 제16권12호
• /
• pp.754-760
• /
• 2006

Mercaptoundecanoic acid (MUA) has been used to enhance the dispersity of Au nanoparticles in organic solvent and the affinity between the Au nanoparticles surface and titanium dioxide shell in the synthesis of $Au/TiO_2$ core-shell composite nanoparticles. The dispersity of the MUA-coated Au nanoparticles in ethanol aqueous solution with different concentration of $H_2O$ was investigated by UV-Vis. absorption spectrum and the coating amount of MUA was varied from 0.02 mM to 1.0 mM. The MUA-coated Au nanoparticles were highly dispersed in pure $H_2O$ in the wide range of the coating amount of MUA. On the contrary, the MUAcoated Au nanoparticles showed an enhanced stability in the ethanol/$H_2O$=8/2 mixed solution only when the coating amount of MUA was 0.05 mM, and in the ethanol/$H_2O$=7/3 mixed solution when the coating amount of MUA was in the range from 0.02 mM to 0.17 mM. From this systematic study, it can be inferred that the stability and the dispersibility of Au nanoparticles in organic solvents are highly sensitive towards the amount of MUA coating.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.130-137
• /
• 1997

Intumescent inorganic and organic coatings which dintr one from the other by the type of gas formers and the mechanisms of foam formation have been obtained and investigated. Inorganic intumescent coatings are the compositions based on water glass and mineral additives with different dispersity. Mineral additives contain adsorbed and absorbed water and carbonates which are destructed with the carbon dioxide and water evolution during the flame action on coating. The decreasing of mineral additives particle sizes under the mechanical milling with the fraction precipitation promotes the foam coke formation with less defects. Here the main structure of comparing compositions does not change. In organic coatings based on epoxy-polymers the polyammonium phosphate additive is used. It is the cabonization catalyst and the foam agent. The polyammonium phosphate of various dispersity employed is uniformly distributed on the polymeric matrix. The decreasing of the particle sizes leads to the increasing of the fire resistant properties of the intumescent coa-ting. The fire resistant analysis of the coating during more than an hour: the coating back side the temperature on plastic or wooden materials does not exceed 423K, and on metal-573K.

• 한국세라믹학회지
• /
• 제56권6호
• /
• pp.601-605
• /
• 2019

This work reports the preparation of ceramic hybrid films with illite-polyethylene composites analyzed as a function of concentration of added illite in polyethylene. The enhancement of oxygen and water-vapor transmission rate of illite-polyethylene film was evaluated to determine its influence on the freshness in fruit packaging. Particle size of illite materials was controlled in the range of 1~10 ㎛ and then mixed with LDPE to form the masterbatch. Ceramic hybrid films were prepared through a blown film making process. To determine the dispersity and abundancy of illite materials in the polyethylene matrix, various characterizations of illite-PE hybrid masterbatch and films were performed using SEM, TGA, and FT-IR. The oxygen and water-vapor transmission rate of illite-polyethylene film was found to be two times higher than that of LDPE film.

• Current Research on Agriculture and Life Sciences
• /
• 제27권
• /
• pp.29-33
• /
• 2009

Liquefied-wood polymer composite was prepared and mechanical properties was evaluated to develop potential utility of liquefied wood. The liquefied wood was made from waste wood and chemical modified with acetic anhydride and maleic anhydride (MA), phtalic anhydride (PA). The composite sheet was prepared from modified liquefied-wood and polymer(PE). The mechanical, chemical and microscopical properties composite sheet were investigated. The results were summarized as follows, 1. The tensile strength was increased and breaking elongation of composite sheet was decreased with the time of acetylation and the dosage of MA. 2. The Young's modulus of composite sheet was gradually decreased with the dosage of PA. 3. The peak intensity of 1737cm-1 in FT-IR spectra of chemical modified liquefied woods was increased. 4. The dispersity of liquefied woods with PE was improved with chemical modification.