• ETRI Journal
• /
• 제32권1호
• /
• pp.33-43
• /
• 2010

The increasing demand for non-sinusoidal currents affects the quality of distribution networks. Harmonic detection is a crucial step in the cancellation of those components by active power filters. In this paper, the discrete cosine transform (DCT) is compared with different implementations based on Fourier transforms, demonstrating their equivalences and the advantages provided by the former. We demonstrate that the phase error in the presence of grid frequency deviations and the transient length are reduced by half in comparison to the discrete Fourier transform. A novel algorithm is developed to provide frequency adaptation to the DCT, taking advantage of its good features. The window width is adjusted in real time according to the actual value of the grid fundamental frequency by means of a phase-locked loop. A technique based on dithering is employed to overcome the limitation caused by the truncation of the window number of samples, so the frequency resolution is enhanced. The theoretical approach is verified by simulated and experimental results.

• 전기전자학회논문지
• /
• 제23권2호
• /
• pp.461-468
• /
• 2019

연속-시간 델타-시그마 ADC는 별도의 안티-엘리아싱 필터가 필요하지 않고, 이산-시간 델타-시그마 ADC에 비해 적은 전력 소모로 넓은 대역폭의 신호를 처리할 수 있는 등 여러 가지 장점을 가지고 있다. 그러나 델타-시그마 ADC의 특성상 높은 주파수의 클럭으로 신호를 샘플링 하여야 하기 때문에, 이를 낮은 데이터 레이트의 고해상도 디지털 신호로 에일리어싱 없이 낮춰 주기 위한 데시메이션 필터가 복잡하고 고속으로 동작해야 한다. 이 논문에서는 연속-시간 델타-시그마 ADC에 펄스-폭-변조를 적용한 구조를 제안하고 이 구조를 이용함으로써 데시메이션 필터를 룩업 테이블을 이용하여 간단하게 구현할 수 있음을 보인다.

• Progress in Superconductivity
• /
• 제4권2호
• /
• pp.121-126
• /
• 2003

The single layer direct-coupled YBCO SQUID magnetometers have been fabricated and characterized for the purpose of the measurement of weak magnetic signals in unshielded environment. Two types of magnetometers have been designed and fabricated using 10 mm$\times$ 10 mm substrates. We could operate the conventional 3-mm-wide solid pickup loop magnetometers more stably than the 12-parallel-line pickup loop magnetometers in laboratory environment. We developed a first-order electronic gradiometer system using the SQUID sensors with axial displacement of 80 mm without any mechanical alignment of magnetometers. The system with a software filter using calculation of discrete Fourier transform could record clearly weak pulse signal of 100 pT in a magnetically disturbed environment.

• 대한기계학회논문집B
• /
• 제33권10호
• /
• pp.811-819
• /
• 2009

In the present study, deposition of discrete and small particles on a filter fiber was simulated by stochastic method. Trajectory of each particle was numerically solved by Langevin equation. And Lattice Boltzmann method (LBM) was used to solve flow field around the filter collector for considering complex shape of deposit layer. Interaction between the flow field and the deposit layer was obtained from a converged solution from an inner-loop calculation. Simulation method is properly validated with filtration theory and collection efficiency due to different filtration parameters are examined and discussed. Morphology of deposit layer and its evolution was visualized in terms of the particle size. The particle loaded effect on collection efficiency was also discussed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1922-1927
• /
• 2008

In the present study, deposition of discrete and small particles, which diameter is less than $1{\mu}m$, on a filter element was simulated by stochastic method. Trajectory of each particle was numerically solved by Langevin equation and Brownian random motion was treated by Brownian dynamics. Lattice Boltzmann method (LBM) was used to solve flow field around the filter collector and deposit layer. Interaction between flow field and deposit layer was obtained from a converged solution from an inner-loop calculation. Simulation method is properly validated and collection efficiency due to different filtration parameters are examined and discussed. Morphology of deposit layer and its evolution was visualized in terms of the particle size. The particle loaded effect on collection efficiency was also discussed.

• Structural Engineering and Mechanics
• /
• 제81권1호
• /
• pp.51-57
• /
• 2022

The problem of optimal stochastic GA control of the system with uncertain parameters and unsure noise covariates is studied. First, without knowing the explicit form of the dynamic system, the open-loop determinism problem with path optimization is solved. Next, Gaussian linear quadratic controllers (LQG) are designed for linear systems that depend on the nominal path. A robust genetic neural network (NN) fuzzy controller is synthesized, which consists of a Kalman filter and an optimal controller to assure the asymptotic stability of the discrete control system. A simulation is performed to prove the suitability and performance of the recommended algorithm. The results indicated that the recommended method is a feasible method to improve the performance of active tuned mass damper (ATMD) shear buildings under random earthquake disturbances.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권3호
• /
• pp.210-220
• /
• 2008

We review three examples (an on-chip transmission line resonator [1], a phase-locked loop [2], and an analog-to-digital converter [3]) of design tradeoffs which can in fact be circumvented; the key in each case is that the parameters that seem to trade off with each other are actually separated in time or space. This paper is an attempt to present these designs in such a way that this common approach can hopefully be applied to other circuits. We note reader that this paper is not a new contribution, but a review in which we highlight the common theme from our published works [1-3]. We published a similar paper [4], which, however, used only two examples from [1] and [2]. With the newly added content from [3] in the list of our examples, the present paper offers an expanded scope.

• 한국통신학회논문지
• /
• 제31권6C호
• /
• pp.637-644
• /
• 2006

본 논문에서는 MPEG 오디오 부호화 과정 중 서브밴드 필터뱅크를 구현하기 위해 사용되는 DCT(Discrete Cosine Transform) 과정에 대해 구현 시스템의 구조에 따른 DCT 알고리즘의 구현 결과와 성능 차이를 분석한다. 고속 DCT 알고리즘은 코사인 계수의 내적을 통해 구하는 직접 구현 방법보다 연산량이 현저하게 적은 것으로 알려져 있지만, 피연산자의 어드레스가 불규칙적이고 출력 데이터를 재정렬하는 과정이 필요하기 때문에 규칙성이 결여되며, 재정렬만을 위한 추가적인 연산이 필요한 경우도 있다. 따라서 DSP와 같이 반복적인 연산을 고속으로 수행하기 위해 최적화된 구조의 하드웨어에서는 알고리즘의 규칙성이 높은 직접 구현 방법에 비해 고속 알고리즘이 불리한 측면이 있으며, 더욱이 유효 자리수를 제한하는 경우, 직접 구현 방법에 비해 더 많은 프로세싱 단계를 거쳐야 하므로 누적 오차가 커진다. 본 논문에서는 알고리즘의 규칙성과 각 프로세서의 연산 방법간의 관계와 유효 자리수에 따른 누적 오차를 분석하고 프로세서의 구조에 따른 고속 알고리즘의 선택 기준을 제시하였다.