• IUGG한국위원회:학술대회논문집
• /
• IUGG한국위원회 2003년도 정기총회 및 학술발표회
• /
• pp.18-18
• /
• 2003

Three-dimensional finite-difference simulation of earthquake ground motion is performed using a locally variable time-step (LVTS) scheme matching with discontinuous grids. Discontinuous grids in three directions and extension of the discontinuous grids' boundary to the free-surface in the LVTS scheme minimize the cost of both the computational memory and the CPU time for models like the localized sedimentary basin. A simplified model of sedimentary basin is dealt to show the feasibility and efficiency of the LVTS scheme. The basin parameters are examined to understand the main characteristics on ground-motion response in the basin. The results show that the seismic energy is concentrated on a marginal area of the basin far from the source. This focusing effect is mainly due to the constructive interference of the direct S-wave with the basin-edge induced surface waves. The ground-motion amplification over the deepest part of the basin is relatively lower than that above the shallow basin edge. Therefore the ground-motion amplification may be more related to the source azimuth or the direction of the incident waves into the basin rather than the depth of it.

• Journal of Power Electronics
• /
• 제17권6호
• /
• pp.1535-1544
• /
• 2017

Advances in FPGA technology have enabled fast real-time simulation of power converters, filters and loads. FPGA based HIL (Hardware-In-the-Loop) simulators have revolutionized control hardware and software development for power electronics. Common time step sizes in the order of 100ns are sufficient for simulating switching frequency current and voltage ripples. In order to keep the time step as small as possible, ideal switching function models are often used to simulate the phase legs. This often produces inferior results when simulating the discontinuous conduction mode (DCM) and disabled operational states. Therefore, the corresponding measurement and protection units cannot be tested properly. This paper describes a new solution for this problem utilizing a discrete-time PI controller. The PI controller simulates the proper DC and low frequency AC components of the phase leg voltage during disabled operation. It also retains the advantage of fast real-time execution of switch-based models when an accurate simulation of high frequency junction capacitor oscillations is not necessary.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권4호
• /
• pp.362-366
• /
• 2014

In recent years, a permanent magnet linear synchronous motor (PMLSM) has been used in various kinds of transportation applications for its relative high power density and efficiency. The general transportation system arranges the armature on the full length of transportation lines. However, when this method is applied to long distance transportation system, it causes increase of material cost and manufacturing time. Thus, in order to resolve this problem, we suggested stationary discontinuous armature PMLSM. However, the stationary discontinuous armature PMLSM contains the edges which always exist as a result of the discontinuous arrangement of the armature. These edges become a problem because the cogging force that they exert bad influences the controllability of the motor. Therefore, in this paper we proposed the combination of skewed magnets and stair shape auxiliary teeth to reduce the force by edge effect. Moreover, we analyzed the influence of the design factors by using a 3-D finite element method (FEM) simulation tool.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제25권4호
• /
• pp.173-195
• /
• 2021

A new implicit discontinuous Galerkin spectral element method (DGSEM) based on the first order hyperbolic system(FOHS) is presented for solving elliptic type partial different equations, such as the Poisson problems. By utilizing the idea of hyperbolic formulation of Nishikawa[1], the original Poisson equation was reformulated in the first-order hyperbolic system. Such hyperbolic system is solved implicitly by the collocation type DGSEM. The steady state solution in pseudo-time, which is the solution of the original Poisson problem, was obtained by the implicit solution of the global linear system. The optimal polynomial orders of 𝒪(𝒽^𝑝+1)) are obtained for both the solution and gradient variables from the test cases in 1D and 2D regular grids. Spectral accuracy of the solution and gradient variables are confirmed from all test cases of using the uniform grids in 2D.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.732-735
• /
• 1997

Variable Structure Controller(VSC) is usually known to have robustness to bounded exogenous disturbances. The robustness is attributed to the discontinuous term in the control input. However, this discontinuous term also causes an undesirable effect called chattering. To alleviate chattering, a hybrid controller consisting of VSC and Fuzzy Logic Controller(FLC) is proposed, which belongs to the category of Fuzzy Sliding Mode Controller(FSMC). The role of FLC in FSMC is to replace a fixed gain of a discontinuous term with a time-varying one based on a specified rule base. The characteristics of proposed controller are shown to be similar to those of VSC with a saturation function instead of sign function. The only remarkable difference is the nonlinearity whose form can be adjusted by free parameters, normalize gain, denormalize gain, and membership functions. Applied to AC servo motor, the proposed controller is compared with VSC in a regulation problem as well as a speed tracking problem. The simulation results show a substantial chatter reduction.

• 한국통신학회논문지
• /
• 제25권3B호
• /
• pp.431-436
• /
• 2000

It is required for us to design multimedia synchronization model which present mixed media, tat contains not only continuous medial but also discontinuous media. And it is useful for us to develop multimedia application software. Proposed paper represents model tat expresses continuous media and discontinuous media. And continuous medial show the temporal relations between media objects then discontinuous media spatial relations. The model proposed in this paper is effective in applying the system to guarantee high quality of services and can process real time application form applying efficient multiple key media when events occur. We verified that the proposed model has improved media palyout rate compared with other previous synchronization models through simulation.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제13권3호
• /
• pp.169-180
• /
• 2009

A discontinuous Galerkin method with interior penalty terms is presented for linear Sobolev equation. On appropriate finite element spaces, we apply a symmetric interior penalty Galerkin method to formulate semidiscrete approximate solutions. To deal with a damping term $\nabla{\cdot}({\nabla}u_t)$ included in Sobolev equations, which is the distinct character compared to parabolic differential equations, we choose special test functions. A priori error estimate for the semidiscrete time scheme is analyzed and an optimal $L^\infty(L^2)$ error estimation is derived.

• Geomechanics and Engineering
• /
• 제14권4호
• /
• pp.325-336
• /
• 2018

Deformation of rock masses is not only related to rock itself, but also related to discontinuities, the latter maybe greater. Study on crack propagation at discontinuities is important to reveal the damage law of rock masses. DDARF is a discontinuous deformation analysis method for rock failure and some modified algorithms are proposed in this study. Firstly, coupled modeling methods of AutoCAD-DDARF and ANSYS-DDARF are introduced, which could improve the modeling efficiency of DDARF compared to its original program. Secondly, a convergence criterion for automatically judging the computation equilibrium is established, it could overcome subjective drawbacks of ending one calculation by time steps. Lastly but not the least, relationship between the super relaxation factor and the calculation convergence is analyzed, and reasonable value range of the super relaxation factor is obtained. Based on these above modified programs, influences on crack propagation of joint angle, joint parameters and geo-stresses' side pressure are studied.

• 한국전자통신학회논문지
• /
• 제8권8호
• /
• pp.1241-1246
• /
• 2013

현재 일반적인 반송 장치에서는 전기자를 반송 경로 전장에 배치하는 지상 1차측 시스템이 적용되고 있다. 하지만 이러한 시스템을 장거리 반송 장치에 적용하면 초기 설치비용과 제작시간이 상승하는 문제점이 발생한다. 이러한 문제점을 해결하기 위해 전기자를 분산시켜 배치하는 방식이 제시되고 있다. 하지만 전기자 분산배치 방식은 전기자가 존재하지 않는 구간에서 외란 발생 시 가동자가 정지할 수 있으며 이 때 전기자에 의한 제어가 불가능하게 되어 가동자를 이동 시킬 수 없는 문제점을 내재하고 있다. 따라서 이러한 문제점을 해결하기 위한 전기자 간격 결정이 매우 중요하다. 또한 전기자를 분산배치 할 경우 단부가 발생하게 된다. 이는 가동자가 전기자에 진입 또는 반출 시에 코깅력을 크게 발생시켜 추력 맥동의 원인이 되며, 소음과 진동을 발생시키므로 저감하여야 한다. 따라서 본 논문에서는 전기자를 분산 배치함에 따라 존재하는 단부 코깅력을 유한요소법을 이용한 2-D 수치해석을 통해 파악하고 이를 최소화하기 위한 전기자 간격을 도출하고자 한다.

• 한국산학기술학회논문지
• /
• 제18권7호
• /
• pp.102-108
• /
• 2017

기존 기술과 신기술의 확산 및 대체 과정에서 발생하는 기술적 불연속성 현상은 단일 기술 및 복수 기술의 확산 및 대체 현상의 거동을 이해하는데 중요하다. 본 연구에서는 기술적 불연속성 구간의 개념에 대해 정의하고, 이 구간을 측정할 수 있는 정량적 지표들에 대한 측정 모형을 개발하였다. 문헌리뷰 및 모형 도출을 바탕으로 기술적 불연속성 구간에 대해 정의 및 측정 모형을 제시하였고, 도출한 모형의 정합성을 반도체 산업의 기술대체 사례를 바탕으로 검증하였다. 기술적 불연속성 구간은 기존 기술과 신기술의 S곡선이 시간에 따라 동시에 존재하면서, 기존 기술의 성능이 신기술의 성능보다 높은 구간으로 정의된다. 또한 기술적 불연속 구간은 불연속 시간 및 불연속 성능으로 측정가능하며, 불연속 시간 및 불연속 성능지표는 불연속 구간에서의 기존 기술과 신기술의 시간 차이 및 성능 차이로 모형화 된다. 본 연구는 기술적 불연속성 현상에 대한 이해뿐만 아니라 기술 확산 및 대체 현상의 전체적인 거동의 이해에 유용할 것이다.