• 제목/요약/키워드: discharge-supply system

검색결과 229건 처리시간 0.022초

치성감염으로 발생한 상악동염을 동반한 관골의 골수염 - 증례보고- (OSTEOMYELITIS OCCURING IN THE ZYGOMA CAUSED BY ODONTOGENIC MAXILLARY SINUSITIS - CASE REPORT)

  • 강희제;이정훈;김용덕;변준호;신상훈;김욱규;정인교
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제30권3호
    • /
    • pp.251-254
    • /
    • 2004
  • Osteomyelitis is the inflammatory disease occured in the bone, involving a bone marrow, a Harversian system and the underlying cortical bone. Osteomyelitis is divided into acute and chronic osteomyelitis. Chronic osteomyelitis. is presented as a pain, swelling, pus discharge and radiographic change. The pathogenesis of osteomyelitis occcuring in the facial bone is predominately due to odontogenic microorgarnisms, Staphylococcus, resulted in odontogenic infection or post-traumatic infection. The mandible is the most commonly involved facial bone and the bones in the middle of third of the face is rare because of a abundant blood supply. Moreover, Osteomyelitis occuring in the zygoma is extremely rare. In our department, we report the case that osteomyelitis occuring in the zygoma with diabetes is resulted by odontogenic maxillary sinusitis.

기-액 혼합 플라즈마 방전 시스템에서 화학적 활성종의 생성 (Study on the Generation of Chemically Active Species Using Gas-liquid Mixing Plasma Discharging System)

  • 김동석;박영식
    • 한국물환경학회지
    • /
    • 제30권4호
    • /
    • pp.394-402
    • /
    • 2014
  • High-voltage dielectric discharges are an emerging technique in environmental pollutant degradation, which are characterized by the production of hydroxyl radicals as the primary degradation species. The initiation and propagation of the electrical discharges depends on several physical, chemical, and electrical parameters such as 1st and 2nd voltage of power, gas supply, conductivity and pH. These parameters also influence the physical and chemical characteristics of the discharges, including the production of reactive species such as OH, $H_2O_2$ and $O_3$. The experimental results showed that the optimum 1st voltage and oxygen flow rate for RNO (N-Dimethyl-4-nitrosoaniline, indicator of the generation of OH radical) degradation were 160 V (2nd voltage of is 15 kV) and 4 L/min, respectively. As the 2nd voltage (4 kV to 15 kV) was increase, RNO degradation was increased and, generated $H_2O_2$ and $O_3$ concentration were increased. The conductivity of the solution was not influencing the RNO degradation, $H_2O_2$ and $O_3$ generation. The pH effect on RNO degradation was not high. However, the lower pH and the conductivity, the higher $H_2O_2$ and $O_3$ generation were observed.

ESD 설계 마진을 위한 출력드라이버 ESD 내성 연구 (A Study on ESD Robustness of Output Drivers for ESD Design Window Engineering)

  • 김정동;이기두;최윤철;권기원;전정훈
    • 대한전자공학회논문지SD
    • /
    • 제48권12호
    • /
    • pp.31-36
    • /
    • 2011
  • 본 논문은 0.13um CMOS 공정에서 적층출력드라이버 ESD 내성에 대하여 조사 하였다. 실제적인 I/O 시스템과 유사하게 프리-드라이버와 파워 클램프를 포함한 적층출력드라이버 회로를 구현하였다. 프리-드라이버 입력 연결 방법과 적층출력드라이버의 NMOS 크기에 따라 8가지 회로를 구성하였으며, TLP 실험을 통해서 HBM 내성을 조사하였다. 그 결과 프리-드라이버의 입력에 전원전압을 인가하고 적층출력드라이버는 가급적 유사한 크기로 진행한 조건이 다른 조건들 보다 높은 항복전류와 항복전압을 보여주었다. 이 테스트 결과를 토대로, 적층출력드라이버의 ESD 내성을 향상시킬 수 있는 설계 가이드를 제안하였다.

이탈리아 항만의 사회경제학적 효과에 대한 연구 (A Study on Socio-Economic Effects of Italian Ports)

  • ;류동근
    • 한국항해항만학회지
    • /
    • 제41권4호
    • /
    • pp.243-250
    • /
    • 2017
  • 항만은 단순히 화물을 적재하고 하역하는 것뿐만 아니라 전 세계적 생산 네트워크 및 복잡한 공급망 내에서 중요한 역할을 하는 허브로 발전해 왔다. 항만은 지역적 수준에서 국가적 수준에 이르기까지 다양한 부가가치 생산 및 고용 창출에 기여하고 있으며, 이러한 점은 항만 및 항만 이해관계자에게 중요한 이슈가 되고 있다. 본 연구는 회귀모델을 활용하여 부가가치 및 고용수치에 대한 정보가 미비한 이탈리아 내 항만 17곳의 부가가치 및 고용효과를 분석하는 것이 목적이다. 이탈리아 항만 시스템 개선의 측면에서, 본 연구는 해당 항만들의 효과와 지역경제 내에서의 역할을 측정할 수 있는 도구를 개발하여 해당 항만의 정책 입안자들이 활용할 수 있도록 하였다. 본 연구에서는 모든 이탈리아 항만들이 지역 경제에 간접적 효과보다는 직접적 효과에 더 영향을 받는 것으로 조사되었으며, 대형 항만에서는 더 큰 사회경제적 효과가 발생하는 것으로 분석되었다.

Research on Step-Type Chemical Liquid Deodorizer using Liquid Catalyst

  • WOO, Hyun-Jin;KWON, Lee-Seung;JUNG, Min-Jae;YEO, Og-Gyu;KIM, Young-Do;KWON, Woo-Taeg
    • 식품보건융합연구
    • /
    • 제6권5호
    • /
    • pp.19-25
    • /
    • 2020
  • The purpose of this study was to research and develop a step-type chemical liquid deodorizer including a liquid catalyst that can prevent civil complaints due to odor due to its excellent deodorizing performance. The main composition of chemical liquid deodorizer including liquid catalyst is cleaning deodorization, catalyst deodorization, chemical deodorization, water film plate, deodorization water circulation device, deodorization water injection device, catalyst management system, gas-liquid separation device, chemical supply device, deodorizer control panel, etc. It consists of a device. The air flow of the step-type liquid catalyst chemical liquid deodorizer is a technology that firstly removes basic odor substances, and the liquid catalyst installed in the subsequent process stably removes sulfur compounds, which are acidic odor substances, to discharge clean air. The efficiency of treating the complex odor of the prototype was 98.5% for the first and 99.6% for the second, achieving the target of 95%. The hydrogen sulfide treatment efficiency of the prototype was 100% for the first and 99.9% for the second, which achieved 95%, which was the target of the project. As a result, ammonia was removed by the reaction of ammonia and hydrogen sulfide.

퇴적물의 네오디뮴 동위원소 비를 활용한 북극 고환경 복원 (Application of Sedimentary Neodymium Isotopes to the Reconstruction of the Arctic Paleoceanography)

  • 장광철;남승일
    • Ocean and Polar Research
    • /
    • 제45권2호
    • /
    • pp.89-102
    • /
    • 2023
  • Climate and environmental changes in the Arctic Ocean due to global warming have been linked to extreme climate change in mid-latitude regions, including the Korean Peninsula, requiring a better understanding of the Arctic climate system based on the paleo-analog. This review introduces three paleoenvironmental research cases using neodymium isotopes (143Nd/144Nd, εNd) measured on two different fractions of marine sediments: silicate-bound 'detrital' and Fe-Mn oxide-dominated 'authigenic' fractions. In the first case, detrital εNd in core HH17-1085-GC on the continental shelf off northern Svalbard was used for tracing changes in sediment provenance and associated glacier behavior over the last 16.3 ka. The second case showed the potential use of authigenic εNd as a quasi-conservative water mass tracer. Three prominent εNd peaks and troughs observed in core PS72/410-1 from the Mendeleev Ridge in the western Arctic Ocean over the past 76 ka suggested episodic meltwater discharge events during 51~46, 39~35 and 21~13 ka BP. The last case proposed the use of the difference between authigenic and detrital εNd as a proxy for reconstructing glacier fluctuation. The idea is based on the assumption that enhanced glacial erosion during glacier advances can supply sufficient freshly-exposed rock substrate for incongruent weathering, potentially leading to greater isotopic decoupling between bedrock and dissolved weathering products as recorded in detrital and authigenic εNd, respectively. Thus, it would be worthwhile to take advantage of sedimentary εNd to improve our understanding of past environmental changes in polar regions.

홍수터여과에서 집수관의 최적설계 연구 (A Study on the Optimum Design of Horizontal Collectors in Floodplain Filtration)

  • 피성민;김승현
    • 대한환경공학회지
    • /
    • 제34권6호
    • /
    • pp.430-437
    • /
    • 2012
  • 홍수터여과에서 집수관의 설계에 대한 자료를 얻기 위해 실험실 규모의 모래통 실험을 수행하였으며, 집수관의 직경, 모래의 투수계수, 집수정의 수위 그리고 지표에서의 원수공급률 등의 변화에 따른 집수관에서의 수두분포와 지하수면 분포를 측정하였다. 측정결과를 수치해석코드에 적용하여 집수관 각 부위에서의 여과수 유입률도 파악하였다. 이들 자료로부터 홍수터여과에서 집수정의 운영수위를 낮춤으로 인한 부작용은 없을 것으로 예상되었으며, 적절한 회수능력에 비해 원수공급률이 큰 경우 대수층에서의 수평방향의 흐름이 발달하여 수평집수관의 통수능 부족을 보완함을 알 수 있었다. 이 경우 여과수의 토양중 이동거리가 늘어나므로 여과수의 수질개선에도 도움이 될 것으로 판단되었고, 따라서 홍수터여과에서는 강변/하상여과에서보다 더 작은 직경의 수평집수관을 사용할 수 있음을 알 수 있었다. 전체 수두손실중 수평집수관에서의 수두손실이 차지하는 비율이 수평집수관 출구유속과 비례함을 알 수 있었으며, 이를 이용하면 홍수터여과에서 수평집수관의 설계와 평가가 가능할 것으로 판단되었다.

에너지저장시스템 적용에 의한 에너지절감 효과에 관한 연구 (A Study on Effects of Energy Saving by Applying Energy Storage System)

  • 안천헌;이한민;김길동;이희성
    • 한국철도학회논문집
    • /
    • 제12권4호
    • /
    • pp.582-589
    • /
    • 2009
  • 회생에너지는 회생 전동차와 역행 전동차의 순간적인 오버랩 경우를 제외하고, 전동차내 저항기 또는 전차선의 저항에 의해 열로서 사라지게 된다. 에너지자정시스템은 전동차 제동시 발생되어 재활용되지 못하고 사라지는 회생 에너지를 에너지저장시스템에 저장하고 전동차가 역행할 때 에너지저장시스템으로부터 에너지를 공급하여 도시철도시스템에서 회생 에너지를 재할용하는 시스템이다. 동시에 역행과 제동하는 차량이 존재하지 않을 지라도 차량간 에너지의 완전한 교환이 이루어 질 수 있다. 따라서 에너지저장시스템은 에너지를 저장하고 재활용함으로서 에너지를 절감할 수 있는 유용한 장치이다. 에너지저장시스템은 운행시격과 관계가 깊은데, 운행 시격이 짧은 경우보다 큰 경우 전동차 회생시 회생 에너지가 모두 에너지저장시스템으로 저장되므로 저장된 에너지를 활용할 수 있어 도시철도 운영기관의 에너지 절감율이 높아지게 된다. 반대로 운행 시격이 짧을 경우 한 변전소 구간 내에 전동차 여러 편성이있을 수 있다. 이때 하나의 전동차 회생시 이 회생 에너지가 주변의 역행 전동차에 공급되면 에너지저장시스템으로 들어오는 회생 에너지는 적을 것이다. 따라서 본 논문은 에너지저장시스템을 적용하는데 있어서 악조건인 운행 시격이 국내에서 가장 짧은 서울메트로 2호선을 대상으로 에너지저장시스템 적용 효과를 에너지절감 측면에서 현장 실측과 시뮬레이션을 통해 분석하고자 한다.

심층처분시스템 설계를 위한 경수로 사용후핵연료 현황 분석 (Investigation of PWR Spent Fuels for the Design of a Deep Geological Repository)

  • 조동건;김정우;김인영;이종열
    • 방사성폐기물학회지
    • /
    • 제17권3호
    • /
    • pp.339-346
    • /
    • 2019
  • 제8차 전력수급기본계획에 근거하여 현재 운영중이거나 계획중인 원자력발전소에서 발생할 사용후핵연료의 양과 특성을 추정하였다. 본 연구에서 고려된 특성은 핵연료집합체에 대한 제원, 핵연료봉 배열, $^{235}U$ 초기 농축도, 방출연소도, 냉각기간이다. 이들은 사용후핵연료 처분시스템을 설계하는데 필수적인 항목이다. 2082년까지 가압경수로 사용후핵연료의 예상발생량은 약 62,500 다발로 추정되었다. 2018년 말까지 발생한 사용후핵연료 중 상대적으로 길이가 짧은 웨스팅하우스형 원전연료가 약 60%, 상대적으로 길이가 50 cm 정도 긴 한국형 원전 연료가 약 40%를 차지하였다. $^{235}U$ 초기 농축도 4.5 wt% 이하를 갖는 사용후핵연료의 비율은 전체 발생량의 약 90%를 차지하였으며, 방출연소도는 98%의 물량이 55 GWd/tU 이하로 나타났다. 2077년을 기준으로 웨스팅하우스형 원전에서 발생한 사용후핵연료의 냉각기간은 50년 이상이 97% 정도를 차지하였으며, 본 논문에서 가정한 처분 완료시점인 2125년을 기준으로 한국형 원전에서 발생한 사용후핵연료의 냉각기간은 45년 이상이 98% 정도를 차지하는 것으로 나타났다. 이러한 결과를 바탕으로 효율적인 처분시스템 설계를 위해 기준 사용후 핵연료는 제원적 특성을 고려하여 두 가지 형태로 설정하였으며, 웨스팅하우스형 원전 연료의 경우, 집합체 제원으로 KSFA, 초기 농축도 4.5 wt%, 방출연소도 55 GWd/tU, 냉각기간 50년으로, 한국형 원전 연료의 경우, 집합체 제원으로 PLUS7, 초기 농축도 4.5 wt%, 방출연소도 55 GWd/tU, 냉각기간 45년으로 설정하였다.

전극 구조 변화에 따른 Cold Hollow Cathode Ion Source의 특성 변화 (Characterization of Cold Hollow Cathode Ion Source by Modification of Electrode Structure)

  • 석진우;;한성;백영환;고석근;윤기현
    • 한국세라믹학회지
    • /
    • 제40권10호
    • /
    • pp.967-972
    • /
    • 2003
  • 직경 5 cm cold hollow cathode 이온원을 박막의 이온보조증착법 또는 이온보조반응법에 사용하기에 적합한 이온빔으로 넓은 면적을 균일하게 조사할 수 있는 이온원을 설계, 제작하기 위한 방안으로 연구하게 되었다. 이온원은 글로우 방전을 위한 음극과 이온화 효율의 증가를 위한 자석, 플라즈마 챔버, 그리드 전극으로 이루어진 이온광학시스템, 직류전원공급장치로 이루어진다. 전자인출전극의 구조 및 형태로 구분하여 한개의 노즐로 이루어진 (I) 형태와 복수개의 노즐로 변형된 (II) 형태로 제작하였다. 서로 다른 구조의 전자인출전극 (I)형태와 (II) 형태를 부착한 이온원에 beam profile을 측정한 결과 (I) 형태의 전자인출전극을 부착한 경우에는 이온원의 중심에서 140 $\mu\textrm{A}$/$\textrm{cm}^2$으로 측정되어 졌으며, 외곽으로 멀어질수록 급격히 전류밀도가 감소하여 균일한 영역(최대값의 90%)은 직경 5 cm로 측정되어졌다. (II) 형태로 변형되어진 이온원의 경우 중심에서 65 $\mu\textrm{A}$/$\textrm{cm}^2$으로 (I) 형태와 비교하여 상대적으로 낮은 전류밀도가 측정되었지만 외각으로 멀어졌을 경우에도 전류밀도는 완만하게 감소하여 균일한 영역은 직경 20 cm로 측정되었으며, 본 연구목적에 부합되는 특성이 측정되었다. 이온빔 균일도가 증가한 (II) 형태의 전자인출전극을 부착한 이온원으로 주입하는 아르곤 가스량의 변화, 이온광학시스템의 플라즈마 그리드 전극과 가속 그리드 전극 간격의 조절, 이온빔 에너지 변화에 따른 beam profile 및 특성을 괸찰하였다.