• 제목/요약/키워드: directional distribution function

검색결과 49건 처리시간 0.024초

다방향 불규칙 파랑중 파일 방파제에 의한 산란파 스펙트럼 (Scattering Wave Spectrum by a Pile Breakwater in Directional Irregular Waves)

  • 조일형
    • 한국해안해양공학회지
    • /
    • 제19권6호
    • /
    • pp.586-595
    • /
    • 2007
  • 고유함수전개법을 사용하여 구한 파일 방파제에 의한 규칙파의 산란 해석해를 다방향 불규칙파로 확장하였다. 규칙파중 입사파의 주파수 그리고 입사각을 변화시키면서 구한 반사율과 투과율 그리고 파랑하중을 가지고 산란파 스펙트럼과 하중 스펙트럼을 표현하였다. 주파수와 입사각의 함수인 2차원 스펙트럼을 적분하여 산란파와 파랑하중의 대푯값을 구하고 방향분포함수, 주파향, 잠긴깊이 그리고 공극율이 투과율과 파랑하중에 미치는 영향을 살펴보았다.

방향성을 고려한 장기 파랑관측자료의 극치파랑조건 분석 (Analysis of Extreme Wave Conditions for Long-Term Wave Observation Data Considering Directionality)

  • 김건우
    • 해양환경안전학회지
    • /
    • 제28권5호
    • /
    • pp.700-711
    • /
    • 2022
  • 본 연구에서는 칠발도, 거문도, 동해에서 20년 이상 관측된 파랑자료를 16 방위별 극치확률분석을 통해 재현빈도별 심해설계파를 산정하였고, 이 값을 방향을 고려하지 않은 전방향파의 심해설계파와 비교하였다. Weibull 분포함수를 확률분포함수로 사용하였으며, 최소자승법을 사용해서 매개변수를 결정하였다. 추정된 분포함수는 Kolmogorov-Smirnov 방법을 사용하여 적합도를 검증하였다. 그 결과 방향별로 구한 심해설계파가 전방향파의 심해설계파보다 모든 방향에서 상대적으로 작은 것으로 나타났다. 파향별로 구한 50년 빈도 설계파고는 칠발도, 거문도, 동해에서 각각 7.46 m(NNE), 12.05 m(S), 9.69 m(SSW)가 최대값이지만, 전방향파로 구한 설계파고는 각각 7.91 m, 13.82 m, 10.38 m이었다. 이는 현재 해양 및 연안 구조물 설계에 사용하고 있는 16 방위별 심해설계파고가 과소산정되었을 가능성이 있음을 보여준다.

Cancellation of MRI Motion Artifact in Image Plane

  • Kim Eung-Kyeu
    • 융합신호처리학회논문지
    • /
    • 제1권1호
    • /
    • pp.49-57
    • /
    • 2000
  • In this study, a new algorithm for canceling a MRI artifact due to the translational motion In the image plane is described. Unlike the conventional iterative phase retrieval algorithm, in which there is no guarantee for the convergence, a direct method for estimating the motion is presented. In previous approaches, the motions in the x(read out) direction and the y(phase encoding) direction were estimated simultaneously. However, the feature of x and y directional motions are different from each other. By analyzing their features, each x and y directional motion is canceled by the different algorithms in two steps. First, it is noticed that the x directional motion corresponds to a shift of the x directional spectrum of the MRI signal, and the non-zero area of the spectrum just corresponds to the projected area of the density function on the x axis. So the motion is estimated by tracing the edges between non-zero area and zero area of the spectrum, and the x directional motion is canceled by shifting the spectrum in an reverse direction. Next, the y directional motion is canceled by using a new constraint condition, with which the motion component and the true image component can be separated. This algorithm is shown to be effective by using a phantom image with simulated motion.

  • PDF

다방향 불규칙파에 대한 조파 기법 및 방향 스펙트럼 추정 연구 (Study on Wave Generation Technique and Estimation of Directional Wave Spectra for Multi-Directional Irregular Waves)

  • 오승훈;정성준;황성철;김은수;성홍근
    • 대한조선학회논문집
    • /
    • 제60권4호
    • /
    • pp.266-277
    • /
    • 2023
  • In this study, fundamental research is conducted for the generation technique and analysis of multi-directional irregular waves in the Deep Ocean Engineering Basin (DOEB). A three-dimensional boundary element method-based numerical tank is implemented to perform wave generation simulations, and directional spectrum estimation is carried out using the results of simulations. The wave generation technique of the Snake type wave maker, generating multi-directional irregular waves, is implemented using the Fast Fourier Transform (FFT) and Inverse Fast Fourier Transform (IFFT) algorithms. The wave generation technique is validated by comparing the wave spectrum from simulations and experiments. A Maximum Likelihood Method (MLM) based estimation code is developed for estimating the directional wave spectra. The multi-directional irregular waves are tested in the DOEB and the numerical tank, and directional wave spectra obtained from two methodologies are estimated and compared. A correction procedure for the directional distribution of multi-directional waves is established, and the possibility of correcting the directional spreading function using the numerical tank is validated.

전차동체의 피탄각 결정을 위한 비대칭 방향확률분포 모델 (A Nonsymmetric Model of Directional Probability Variation [DPV] for Tanks)

  • 김의환;장원범;이대일
    • 한국국방경영분석학회지
    • /
    • 제25권1호
    • /
    • pp.55-74
    • /
    • 1999
  • In this study, a nonsymmetric model of directional probability variation (dpv), which is fundamental and conforms well to various moving situations of attacking tanks, is obtained based on the Whittaker's theory. It is shown that it produces the same expression of the probability density function as the Whittaker's under the special moving condition of an attacking tank. Using the derived dpvs, the probability densities for the various cases of some examples are calculated numerically to verify the derived formulas, and compared with other existing symmetrical distributions widely used to grasp characteristics of them. As a result, it is noted that the plots of the probability density function for various cases selected exhibit very different and useful behavioral features. Applying the results with respect to the every tank in the computer simulation of engagement between two tank forces, it is expected that more reasonable shot distributions can be given comparing with other existing symmetrical ones. The derived dpvs may be utilized to decide shot distribution of other weapon systems through small modification.

  • PDF

태양광발전이 연계된 배전계통의 보호기기 오동작에 대한 최적 운용방안에 관한 연구 (A Study on the Optimal Method for Mal-function of Re-closer at the Distribution Feeders Interconnected with PV Systems)

  • 김찬혁;박현석;노대석;신창훈;윤기갑
    • 전기학회논문지
    • /
    • 제58권8호
    • /
    • pp.1512-1518
    • /
    • 2009
  • Recently, new dispersed power sources such as photovoltaics, wind power, fuel cell etc. are energetically interconnected and operated in the distribution systems, as one of the national projects for alternative energy. This paper deals with the optimal countermeasures for the mal-function of protective devices at primary feeder in distribution systems when new power sources like photovoltaic (PV) systems are interconnected, based on the symmetrical components of short circuit studies. When new power sources are considered to be interconnected to distribution systems, bi-directional power flow and interconnection transformer connection of new power sources may cause the operation problems of protective devices (mainly re-closer), since new power sources can change typical characteristics of distribution systems. Therefore, this paper shows an analysis skill of the mal-functional mechanism of protective relay and proposes the optimal solution for the mal-function problem using the symmetrical components of fault analysis. And, this paper also shows the effectiveness of proposed method by the simulation at the field distribution systems.

확률적인 중방향 설계시간 교통량 산정 모형에 관한 실험적 해석 (An Experimental Analysis of a Probabilistic DDHV Estimation Model)

  • 조준한;김성호;노정현
    • 대한교통학회지
    • /
    • 제27권2호
    • /
    • pp.23-34
    • /
    • 2009
  • 본 연구는 전통적인 중방향 설계시간 교통량의 문제점을 개선하기 위해 양방향 교통량이 아닌 중방향 교통량에 따른 링크통행시간의 확률분포개념을 도입하여 확률적인 중방향 설계시간 교통량(PDDHV) 산정 모형에 대한 실험적 해석을 수행하였다. PDDHV산정에 대한 실험적 결과를 토대로 적정 설계순위를 2차로/4차로에 대해 16개의 확률분포형을 대상으로 최우도법을 이용하여 매개변수를 추정하였으며, 적합도 검정은 Kolmogorov-Smirnov 검정을 적용하였다. 적정 설계순위 확률분포형은 2차로도로는 Beta General분포, 4차로도로는 Weibull분포가 가장 적합한 것으로 나타났다. 차로별 적정 확률분포형에 대해 누적분포함수의 역함수를 이용하여 설계서비스수준 D에 따른 적정 설계순위를 산정한 결과, 2차로는 190 순위, 4차로는 164 순위로 도출되었다. 또한, PDDHV 산정에서 새롭게 제시한 계수에 대한 적정값은 2차로 도로 경우 PK계수는 0.119(0.100${\sim}$0.139), PD계수는 0.568(0.545${\sim}$0.590)이며, 4차로도로 경우 PK계수는 0.106(0.097${\sim}$0.114), PD계수는 0.571(0.544${\sim}$0.598)로 도출되었다.

분산전원이 연계된 배전계통의 양방향 구간개폐기의 동작 알고리즘에 관한 연구 (A study on the Operation Algorithm for Bi-directional Sectonalizer in Distribution System Interconnected with Distributed Generations)

  • 윤기갑;정점수;안태풍;노대석
    • 한국산학기술학회논문지
    • /
    • 제10권8호
    • /
    • pp.1802-1809
    • /
    • 2009
  • 기존의 배전계통은 전원 측인 배전용변전소에서 부하 측인 수용가로 전력을 단 방향으로 공급하는 것이 일반적이지만, 태양광과 풍력 등과 같은 분산전원이 배전계통에 연계되는 경우에는 분산전원에서 발생하는 전력이 계통으로 공급되는 역 조류가 발생하여 기존의 시스템과 달리 양방향으로 전력이 공급되게 된다. 이러한 양방향 전력공급은 기존의 시스템에 악 영향을 끼칠 수 있는데, 배전선로에 설치되어 있는 보호협조기기에 심각한 문제점을 발생시킬 수 있다. 특히 기존의 구간 개폐기는 주 전원 측의 전력만 감지할 뿐, 분산전원 측의 역 조류 감지 및 보호를 하지 못해 오동작을 일으킬 가능성이 존재한다. 이러한 경우 분산전원의 단독 운전뿐만 아니라 배전계통과 분산전원의 비동기 투입에 의하여 배전계통에 악영향을 끼칠 수도 있다. 따라서 본 논문에서는 이에 대한 대책으로서 역 조류를 감지하는 구간 개폐기의 양방향 동작 알고리즘을 제시하고, 이에 대한 성능을 확인하기 위하여, 배전계통의 대표적인 해석 S/W인 PSCAD/EMTDC를 이용하여 시뮬레이션을 수행하였다. 또한 보호기기 모의시험 장치를 제작하여 하드웨어적인 시험 결과를 분석하여, 본 논문에서 제안한 구간개폐기의 양방향 동작 알고리즘에 대한 효용성과 타당성을 확인하였다.

Continuous Viewing Angle Distribution Control of Liquid Crystal Displays Using Polarization-Dependent Prism Array Film Stacked on Directional Backlight Unit

  • Park, Min-Kyu;Park, Heewon;Joo, Kyung-Il;Jeong, Hee-Dong;Choi, Jun-Chan;Kim, Hak-Rin
    • Journal of the Optical Society of Korea
    • /
    • 제20권6호
    • /
    • pp.799-806
    • /
    • 2016
  • We present a polarization-dependent prism array film for controlling the viewing angle distribution of liquid crystal (LC) display panels without loss of light efficiency. On a directional backlight unit, our polarization-dependent prism array film, made into a stacked bilayer with a well-aligned liquid crystalline reactive mesogen (RM) layer on the UV-imprinted prism structure, can continuously control the light refraction function of the prism array by electrically switching incident polarization states of a polarization-controlling layer prepared by a twisted nematic LC mode. The viewing angle control properties of the polarization-dependent prism array film are analyzed under different prism angle and refractive index conditions of the RM layer. A simple analytic model is also presented to describe the intermediate viewing angle distributions with continuously varying applied voltages and incident polarization states.

The Edge Distribution Function Based Method of Trajectory Tracking for AGV

  • Yi, Un-Kun;Ha, Sung-Kil;Jung, Sung-Yun;Hwang, Hee-Jung;Baek, Kwang-Ryul
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2005년도 ICCAS
    • /
    • pp.1701-1704
    • /
    • 2005
  • We developed an machine vision method for navigation control of a traveling automatic guided vehicle(AGV) on desired trajectory with guided marks. The formulated EDF accumulates the edge magnitude for edge directions. The EDF has distinctive peak points at the vicinity of trajectory directions due to the directional and the positional continuities of desired trajectory. Examining the EDF by its shape parameters of the local maxima and symmetry axis results in identifying whether or not change in traveling direction of an AGV has occurred. Simulation results show that the presented method is useful for navigation control of AGV.

  • PDF