• Journal of the Korean Institute of Landscape Architecture
• /
• v.23 no.1
• /
• pp.157-173
• /
• 1995

Seowons were first established during the Koryo Dynasty and contain primate shrines for the service of ancestors and ancient sages. Seowons were located in a scenic or rural place some distance from a residential area. The direct motive for building the Seowon came from the need for transcendental concealment and evasive retirement which developed as a result of oppression of scholars The indirect motivations were the development of loaming in an idyllic natural settings and the creation of a beautiful natural environment. he purpose of tai study is to investigate the characteristics and transformation process of the location of Seowon in the Chosen dynasty. The results of this research are summarized as fellows : 1. Seowons were in hilly areas with good geographical features including a nice view of the mountains and waters. Beowons were also built on the relation place of an ancient sage and of destroyed Buddist temples. 2. The location patterns of seowon in the Choson dynasty underwent three stages with the change of time Political and social phenomena influenced the transformation of the location patterns Research in this area is at an early stage. The present study was confined to an examination of 7he characteristics and transformation process of the location of seowons. However, it is hoped that this study will offer meaningful guide for further research.

• International Commerce and Information Review
• /
• v.18 no.3
• /
• pp.181-201
• /
• 2016

In this study, transaction cost approach was applied to analysis on direct export determinants of SMEs by using key attributes of transactions, asset specificity, environmental uncertainty, frequency and marketing capability, with a parameter of opportunism. Typical Transaction Cost Analysis theory explains that when transaction cost with business channels(whether it is for buy or sell) increase, the firms integrate the channels. So it is a choice made by firms regarding direct versus indirect channels. The theory was extended to a model of choice of institutional form of direct or indirect export by a norm of opportunism in this empirical study. The survey result showed that lower level of asset specificity and marketing capability or higher level of environmental uncertainty were likely to expose indirect exporters to higher level of opportunism of direct exporter. And we also saw that indirect exporters were likely to choose direct export chanel when opportunism of exporters was higher. From the standpoint of theory, we can say that the basic propositions of the Transaction Cost Analysis, except the attribute of frequency, are supported. This study result could provide a profiling of target business areas and firms for government's policy on direct export promotion of SMEs.

• Journal of KIISE:Software and Applications
• /
• v.36 no.4
• /
• pp.261-272
• /
• 2009

The EJB 3.0 specifications, which were improved in terms of performance and ease of development, were recently announced. Accordingly, for the EJB 3.0 application environment, developers generally prefer the gradual transformation of components whose performance must be improved to the complete transformation of all the EJB 2.1 components into EJB 3.0 components. Previous studies, however, did not consider the service of the application and did not ensure the compatibility and reusability of the components in the full replacement of EJB 3.0 due to the transformation using different specifications. This study proposed three transformation techniques that consider the service supported in the existing application, wherein the compatibility and reusability of the components are ensured in the case of the full replacement of EJB 3.0. The proposed transformation techniques are techniques for gradual transformation, such as direct transformation that directly connects components, indirect transformation that uses the EJB connector, and indirect template transformation wherein the template pattern is applied to the indirect transformation. The proposed transformation techniques were verified by comparing the reusability and processing capability of the components per second, and the standards for selecting a technique were provided based on the characteristics of the transformation into EJB 3.0 that were found in this study.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.4
• /
• pp.125-132
• /
• 1987

The bundle adjustment used in photogrammetric data reduction is based on the collinearity condition. Photogrammetry has been used in many non-topographic applications. Due to the necessities of having fiducial marks and knowing initial approximations for interior and exterior orientation elements in bundle adjustment, it cannot be applied when non-metric cameras are used. Marzan and Karara develop the DLT(Direct Linear Transformation) program which directly transforms comparator coordinates into object space coordinates without approximate values. In this paper, several modifications of original DLT program have been made for accuracy improvement in close-range photogrammetry using non-metric cameras. In modified program, gross error detection method and computation of exterior orientation elements are incorporated, and more iterations are introdued.

• Smart Structures and Systems
• /
• v.21 no.2
• /
• pp.195-205
• /
• 2018

Research on Lamb wave-based damage identification in plate-like structures depends on precise knowledge of dispersive wave velocity. However, boundary reflections with the same frequency of interest and greater amplitude contaminate direct waves and thus compromise measurement of Lamb wave dispersion in different materials. In this study, non-reflecting boundaries were proposed in both numerical and experimental cases to facilitate time-frequency characterization of Lamb wave dispersion. First, the Lamb wave equations in isotropic and laminated materials were analytically solved. Second, the non-reflecting boundaries were used as a series of frames with gradually increased damping coefficients in finite element models to absorb waves at boundaries while avoiding wave reflections due to abrupt property changes of each frame. Third, damping clay was sealed at plate edges to reduce the boundary reflection in experimental test. Finally, the direct waves were subjected to the slant-stack and short-time Fourier transformations to calculate the dispersion curves of phase and group velocities, respectively. Both the numerical and experimental results suggest that the boundary reflections are effectively alleviated, and the dispersion curves generated by the time-frequency analysis are consistent with the analytical solutions, demonstrating that the combination of non-reflecting boundary and time-frequency analysis is a feasible and reliable scheme for characterizing Lamb wave dispersion in plate-like structures.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.3
• /
• pp.257-264
• /
• 1999

The lens distortions were corrected directly using the high-order polynomial which was offered in camera calibration data for the forward transformation and the root of Newton-Raphson's $2\times{2}$ nonlinear system for the backward transformation. The 0.04~0.08 pixels increase in accuracy was indicated through the use of direct correction of lens distortions instead of least square methods of commercial software. The least square adjustment method of high-order polynomial requires many control points which has a same weight. But this suggested method which is unnecessary to determine control points was developed and applied. The algorithm showed improved efficacy.

• Korean Institute of Interior Design Journal
• /
• v.21 no.5
• /
• pp.280-288
• /
• 2012

The objective of this study was to analyze the characteristics of traditionality expressions at modernized Chinese restaurant in Hong Kong. As a case study, the study examined 12 modernized Chinese restaurants in Hong Kong. The gathered data were categorized and examined according to the ways of traditionality expressions, which included reproduction, transformation, and reinterpretation of traditional components. Each of the components was measured for the amount of traditional or modernity expression on a five-point scale. The five-point scoring system put an emphasis on tradition; 1 point was given to principal modernity(modernity: 90-100% + tradition: 0-10%), 2 points were given to principal modernity + auxiliary tradition(modernity: 70-90% + tradition: 10-30%), 3 points were given to the same ratio between tradition and modernity(modernity: 40-60% + tradition: 40-60%), 4 points were given to principal tradition + auxiliary modernity(modernity: 10-30% + tradition: 70-90%), and 5 points were given to principal tradition(modernity: 0-10% + tradition: 90-100%). The analysis performed according to those criteria and methodologies led to the following findings and conclusions: TM style, in which modernity was principal, usually did transformation and reinterpretation of traditionality. As for the design attributes of the styles, the TM style, they processed a majority of the spatial components as modern or reinterpretation of traditionality, which would be easily considered to be modern without careful observation, and applied a small amount of direct reproduction or transformation, which gives out a direct hint at traditionality, to attract more attention. Many of the spatial components did not express traditionality directly, expressing it indirectly or metaphorically. Traditionality was expressed in a small number of the spatial components, thus serving as a focus or impact point in the given space.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.9
• /
• pp.22-29
• /
• 1995

An experimental method to identify the rigid properties (mass, moment of inertia, center of mass) of mounted structures is presented. A direct system identification method is developed and applied to identify the mass, damping and stiffness martix directly from the translational response of vibration testing. Conventional method is sensitive to noise since it needs artificial rotational response of temporary center of mass which is made by the linear transformation of translational response. A presented method needs only the translational response, and it is robuster to noise than conventional method. Several experimental and numerical implementations show the presented method is effective.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.978-980
• /
• 2000

Sensorless PMSM is much studied for the industrial applications and home appliances because, a mechanical sensor reduces reliability and increases cost. Two types of instantaneous torque controls are basically used for high performance variable-speed a.c. drive : vector control and direct torque control. This paper investigates speed sensorless control of PMSM using direct torque control. The switching of inverter is determined from SVPWM realizing the command voltage which is obtained by flux error and measured current without d-q transformation. The rotor speed is estimated through adaptive observer with feedback loop. The simulation and experimental results indicate good performances.

• Proceedings of the KIEE Conference
• /
• 2000.11b
• /
• pp.336-338
• /
• 2000

Recently many studies have been performed for variable speed control of induction motor. Direct Torque Control(DTC) is emerging technique for variable speed control of PWM inverter driven induction motor. DTC allows the direct control of stator flux and instantaneous torque through simple algorithm. In this paper ASIC design technique using VHDL is applied to DTC based speed control of induction motor. ASIC for DTC based speed control is designed through the description of coordinate transformation, speed controller stator flux and torque estimator, stator flux and torque controller, stator flux position detector. FSM(Finite State Machine) and inverter voltage switching vector. Finally the above system has been implemented on the FPGA (XC4052XL-PG411). Simulation and experiment has been performed to verify the performance of the designed ASTC.