• Structural Engineering and Mechanics
• /
• v.53 no.5
• /
• pp.897-919
• /
• 2015

In this study, the effects of ground shocks due to explosive loads on the dynamic response of historical masonry bridges are investigated by using the multi-point shock response spectrum method. With this purpose, different charge weights and distances from the charge center are considered for the analyses of a masonry bridge and depending on these parameters frequency-varying shock spectra are determined and applied to each support of the two-span masonry bridge. The net blast induced ground motion consists of air-induced and direct-induced ground motions. Acceleration time histories of blast induced ground motions are obtained depending on a deterministic shape function and a stationary process. Shock response spectrums determined from the ground shock time histories are simulated using BlastGM software. The results obtained from uniform and multi-point response spectrum analyses cases show that significant differences take place between the uniform and multi-point blast-induced ground motions.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.5
• /
• pp.22-31
• /
• 1997

We have measured the optical properties, thickness, and energy band gap of the P $b_{1-x}$/100/L $a_{x}$100/ $Ti_{1-}$0.25x/100/ $O_{3}$ (PLT(x)) thin film prepared by the sol-gel method with varying the La concentration, x, fyom 15 nto 33 mol%. We have obtained the values from the tranmission spectrum and employed the envelope method in anayzing the spectrum. We have also performed the simulation of the transmission spectrum on the PC (personal computer) to verify the accuracy of the values 15 to 33mol%, the refractive index (at .lambda.=632.8nm) increases from 2.39 to 2.44. The extinction coefficient does not depend on the la concentration but mainly on te wavelength, and has the values between 0.2 and 0.5 at the wavelength shorter than 330nm and between 0.001 and 0.008 at the wavelength longer than 700nm. The energy band gap of the PLT (x) thin film has been obtained on the assumption of the direct band-to-band transition. It decreases from 3.28 to 3.17eV as the La concentration increases from 15 to 33 mol%. The thickness of the PLT(x) thin film has been also obtained in high accuracy by the envelope method..

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.9
• /
• pp.2081-2100
• /
• 2013

In this paper, we propose a cooperative hybrid spectrum sharing protocol by jointly considering interweave (opportunistic) and underlay schemes. In the proposed protocol, secondary users can access the licensed spectrum along with the primary system. Our network scenario comprises a single primary transmitter-receiver (PTx-PRx) pair and a group of M secondary transmitter-receiver (STx-SRx) pairs within the transmission range of the primary system. Secondary transmitters are divided into two groups: active and inactive. A secondary transmitter that gets an opportunity to access the secondary spectrum is called "active". One of the idle or inactive secondary transmitters that achieves the primary request target rate $R_{PT}$ will be selected as a best decode-and-forward (DF) relay (Re) to forward the primary information when the data rate of the direct link between PTx and PRx falls below $R_{PT}$. We investigate the ergodic capacity and outage probability of the primary system with cooperative relaying and outage probability of the secondary system. Our theoretical and simulation results show that both the primary and secondary systems are able to achieve performance improvement in terms of outage probability. It is also shown that ergodic capacity and outage probability improve when the active secondary transmitter is located farther away from the PRx.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.12
• /
• pp.1797-1805
• /
• 1993

An algorithm for the threshold decision from the maximum mismatching correlation value in a direct-sequence spread-spectrum system is presented. This algorithm is named the TDMMC(Threshold Decision from the Maximum Mismatching Correlation value). The purpose of the algorithm is to set the decision threshold in the system which will provide large probability of signal detection. Using this algorithm, the proper setting of the threshold for various SNRs is possible. An additional block called the Threshold Block is used to improve the system performance. The result from the computer simmulation has shown that appling the TDMMC to the noncoherent DS/SS-CSK system can achieve performance improvement.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.11
• /
• pp.25-32
• /
• 2004

In this paper, we first analysed the ability of DSSS resistance against noises, which are main interferences to the four types in power line communications. Based on the characteristic of these noises, we made a noise source of power line which is similar with the result measured, in practice. We simulated and analysed the BER performance of BPSK with DSSS over this noise model and one without the DSSS, for comparison. Result showed that the BPSK with DSSS system has improved by 8 dB, as compared to those without the DSSS, as against power line noises.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.4
• /
• pp.537-546
• /
• 2001

Griffth's and LCCMA which are Single-user detection adaptive algorithm are proposed for mitigate MAI(multiple access interference) and the near-far problem in direct-sequence spread-spectrum CDMA system and MOE Algorithm is proposed for MMSE(Minimum Mean-Square Error). This paper pertains to three types of Blind adaptive algorithms which can upgrade system functionality without the requirements from training sequence. It goes further to compare and analyze the functionalities of the algorithms as per number of interfering users or data update rate of the users. The simulation results was that LCCMA algorithm was superior to other algorithms in both areas. Blind application enabled a more flexible network design by eliminating the necessity of training sequence.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.1
• /
• pp.56-64
• /
• 2017

In this paper, an advanced ZigBee (AZB) system for internet-of-things (IoT) applications is proposed which can support various data rates from 31.25 Kbps to 2 Mbps, and the implementation results of the AZB baseband processor are presented. Repetition coding for 32-chip direct-sequence spread spectrum (DSSS) symbol is applied for low rates under 250 Kbps to extend the coverage. Convolution coding, puncturing, and interleaving for non-DSSS symbol are performed for high rates from 500 Kbps to 2 Mbps for multi-media services. Simulation results show that the coverage increases at the rate of 51.8-77.3% for various environments compared with IEEE 802.15.4 ZigBee. AZB baseband processor was implemented in 180 nm CMOS process and total gate counts are 260K with the size of $5.8mm^2$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1A
• /
• pp.99-106
• /
• 2004

In this Paper, the matched filter for searching initial synchronization in DSSS (direct sequence spread spectrum) receiver is studied. The matched filter with a single data flow path is described which can be presented by HDL (Hardware Description Language). In order to improve the processing time of operations for the filter, equations are arranged to represent two data flow paths and the associated hardware model is proposed. The model has an architecture based on parallelism and pipeline for fast processing, in which two data flow paths with a series of memory, multiplier and accumulator are placed in parallel. The performance of the model is analyzed and compared with the matched filter with a single data flow path.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.2
• /
• pp.333-339
• /
• 2012

Global flow of communication is a trend of high speed, digitalization, and high-capacity. Furthermore, spread spectrum method has been dominantly utilized to efficiently use the frequency which is the scarce resource. The PLL (Phase Lock Loop) which is a widely used frequency synthesizer in communication systems has few problems such as status interferences and hence, this study utilized the DDS (Direct Digital Synthesis) which is a digital device that can minimize the problems of PLL for the study on the performance evaluation of high speed frequency hopping system design. We designed a system that practices high speed frequency hopping and interprets improvement of error-rates and evaluated its performance.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.1
• /
• pp.119-126
• /
• 2010

The some papers which deal with the dynamic instability for shell-like structures under the dynamic excitation have been published, but there are few papers which treat the essential phenomenon of the dynamic buckling using the phase plane for investigating occurrence of chaos. In nonlinear dynamic, examining the characteristics of attractor on the phase plane and investigating the dynamic buckling process are very important thing for understanding why unstable phenomena are sensitively originated by various initial conditions. In this study, the direct and indirect snapping of shallow EP shell considering geometrical nonlinearity are investigated by Galerkin method numerically. This finding out the characteristic of the dynamic instability through the phases curves and running response spectrum.