• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.458.2-458.2
• /
• 2014

We have demonstrated that simple brush-painted Ti-doped $In_2O_3$(TIO) films can be used as a cost effective transparent anodes for organic solar cells (OSCs). We examined the RTA effects on the electrical, optical, and structural properties of the brush painted TIO electrodes. By the direct brushing of TIO nanoparticle ink and rapid thermal annealing (RTA), we can simply obtain TIO electrodes with a low sheet resistance of 28.25 Ohm/square and a high optical transmittance of 85.48% under atmospheric ambient conditions. Furthermore, improvements in the connectivity of the TIO nano-particles in the top region during the RTA process play an important role in reducing the resistivity of the brush-painted TIO anode. In particular, the brush painted TIO films showed a much higher mobility ($33.4cm^2/V-s$) than that of previously reported solution-process transparent oxide films ($1{\sim}5cm^2/V-s$) due to the effects of the Ti dopant with higher Lewis acid strength (3.06) and the reduced contact resistance of TIO nanoparticles. The OSCs fabricated on the brush-painted TIO films exhibited cell-performance with an open circuit voltage (Voc) of 0.61 V, shot circuit current (Jsc) of $7.90mA/cm^2$, fill factor (FF) of 61%, and power conversion efficiency (PCE) of 2.94%. This indicates that brush-painted TIO film is a promising cost-effective transparent electrode for printing-based OSCs with its simple process and high performance.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.4
• /
• pp.341-348
• /
• 2016

The aim of this study is to suggest design requirements on the military barriers which are installed to reduce critical damage on protective facilities against sudden pin-point attacks caused by North Korean artilleries. For this purpose, site investigation and review of design drawings associated with barriers built in the contact areas are conducted. With identified data concerning barriers, the geometric modeling, which is used in the structural analysis, is performed. And then, the possible threat of North Korea is determined based on intelligence preparation of battlefields. Once the structural modeling and threat analysis are completed, structural damage on barriers and protective facilities are assessed in terms of impact, penetration, scabbing, and blast pressure effects. According to the analysis results, the thickness of barriers should be 450mm at least and current established barriers need to be structurally reinforced via sectional enlargement.

• Journal of Plant Biotechnology
• /
• v.37 no.4
• /
• pp.483-493
• /
• 2010

Knock-out of a gene by insertional mutagenesis is a direct way to address its function through the mutant phenotype. Among ca. 15,000 gene-trapped Ds insertion lines of rice, we identified one line from selected sensitive lines in highly salt stress. We conducted gene tagging by TAIL-PCR, and DNA gel blot analysis from salt sensitive mutant. A gene encoding an oligopeptide transporter (OPT family) homologue was disrupted by the insertion of a Ds transposon into the OsOPT10 gene that was located shot arm of chromosome 8. The OsOPT10 gene (NP_001062118.) has 6 exons and encodes a protein (752 aa) containing the OPT family domain. RT-PCR analysis showed that the expression of OsOPT10 gene was rapidly and strongly induced by stresses such as high-salinity (250 mM), osmotic, drought, $100\;{\mu}M$ ABA. The subcellular localization assay indicated that OsOPT10 was localized specifically in the plasma membrane. Overexpression of OsOPT10 in Arabidopsis thaliana and rice conferred tolerance of transgenic plants to salt stress. Further we found expression levels of some stress related genes were inhibited in OsOPT10 transgenic plants. These results suggested that OsOPT10 might play crucial but differential roles in plant responses to various abiotic stresses.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.3
• /
• pp.64-72
• /
• 2021

Manned-unmanned teaming can be a very promising air-to-air combat tactic since it can maximize the advantage of combining human insight with the robustness of the machine. The rapid advances in artificial intelligence and autonomous control technology will speed up the development of manned-unmanned teaming air-to-air combat system. In this paper, we introduce a manned-unmanned teaming air-to-air combat tactic which is composed of a manned aircraft and an UAV. In this tactic, a manned aircraft equipped with radar is functioning both as a sensor to detect the hostile aircraft and as a controller to direct the UAV to engage the hostile aircraft. The UAV equipped with missiles is functioning as an actor to engage the hostile aircraft. We also developed a combat scenario of executing this tactic where the manned-unmanned teaming is engaging a hostile aircraft. The hostile aircraft is equipped with both missiles and radar. To demonstrate the efficiency of the tactic, we run the simulation of the scenario of the tactic. Using the simulation, we found the optimal formation and maneuver for the manned-unmanned teaming where the manned-unmanned teaming can survive while the hostile aircraft is shot-downed. The result of this study can provide an insight to how manned aircraft can collaborate with UAV to carry out air-to-air combat missions.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.1
• /
• pp.195-205
• /
• 2024

This study is descriptive research study to understand the impact of digital ethics-literacy, multicultural acceptance, and global citizenship of medical students' on cultural competency. The subjects for this study were the medical students of J city of Province of G, collecting data from first of October to 15th of October 2023. The tools used for this study consist of 178 questions which were 9 questions of general properties, 70 questions of digital ethics-literacy, 35 questions of multicultural acceptance, 3qustions of global citizenship and 33 questions of cultural competency. As a result of this study, the score of digital ethics-literacy was 2.67±0.85(out of 5), the score of multicultural acceptance was 3.62±1.08(out of 6), the score of global citizenship was 3.72±0.75(out of 5), and the score of cultural competency was 3.49±0.71(out of 5). There is a positive correlation between multicultural acceptance and global citizenship. The global citizenship was the factor affecting significantly on cultural competency. The power of explication was 20.8%. The education for accepting and understanding cultural diversity and offering opportunity of domestic and overseas volunteering programs so that global citizenship could be improved. There is also a need of development of integrative education programs in terms of multicultural education including direct and indirect digital media education which can perform medical service for various multicultural recipient on the medical site not an one-shot instiiled displine.

• Geophysics and Geophysical Exploration
• /
• v.11 no.1
• /
• pp.15-25
• /
• 2008

Ocean-bottom seismometer (OBS) positions are one of the key parameters in an OBS-airgun seismic survey for crustal structure study. To improve the quality of these parameters, we have developed a new method of determining OBS positions, using airgun shot data and bathymetric data in addition to available distance measurements by acoustic transponders. The traveltimes of direct water waves emitted by airgun shots and recorded by OBSs are used as important information for determining OBS locations, in cases where there are few acoustic transponder data (<3 sites). The new method consists of two steps. A global search is performed as the first step, to find nodes of the bathymetric grid that are the closest to explaining the observed direct water-wave traveltimes from airgun shots, and acoustic ranging using a transponder system. The use of precise 2D bathymetric data is most important if the bottom topography near the OBS is extremely rough. The locations of the nodes obtained by the first step are used as initial values for the second step, to avoid falling into local convergence minima. In the second step, a non-linear inverse method is executed. If the OBS internal clock shows large drift, a secondary correction for the OBS internal clock is obtained, as well as the OBS location, as final results by this method. We discuss the error and the influence of each measurement used in the determination of OBS location.

• Journal of Embryo Transfer
• /
• v.18 no.2
• /
• pp.151-156
• /
• 2003

The objective of this study was to investigate response of corpus luteum, recovery rate of embryos and production of transferable embryos according to superovulation by PEG 30% FSH in Hanwoo. Cows were selected as recipient, subsequent were superovulated with a total of 400 mg NIH-FSH-P1(Folltropin-V, Canada) given by one shot subcutaneously. At the time of five days after Folltropin injection, 25mg of a PGF$_2$a was injected and cows were inseminated 12 and 24h after the onset of estrus. Seven days after insemination, embryos were collected non-surgically and were cryopreserved by direct transfer methods. The results are summarized as follows : 1. Response of corpus luteum following the superovulation in Hanwoo, right ovary were 52.8%(271/513) and left ovary were 47.1%(242/513), respectively (P<0.05). 2. Recovery rate of embryos following the number of corpus luteum were 83.0%(426/513). 3. Mean number of embryos recovered and transferable embryos were 7.74 and 6.43, respectively (P<0.05). 4. In the total number of transferable embryos per flush were collected 6.4 and all saved transferable embryos were 355.

• Geophysics and Geophysical Exploration
• /
• v.23 no.1
• /
• pp.38-49
• /
• 2020

Full-waveform inversion (FWI) is an optimization process of fitting observed and modeled data to reconstruct high-resolution subsurface physical models. In acoustic FWI (AFWI), pressure data acquired using a marine streamer has mainly been used to reconstruct the subsurface P-wave velocity models. With recent advances in marine seismic-acquisition techniques, acquiring multi-component data in marine environments have become increasingly common. Thus, AFWI strategies must be developed to effectively use marine multi-component data. Herein, we proposed an AFWI strategy using horizontal and vertical particle-acceleration data. By analyzing the modeled acoustic data and conducting sensitivity kernel analysis, we first investigated the characteristics of each data component using AFWI. Common-shot gathers show that direct, diving, and reflection waves appearing in the pressure data are separated in each component of the particle-acceleration data. Sensitivity kernel analyses show that the horizontal particle-acceleration wavefields typically contribute to the recovery of the long-wavelength structures in the shallow part of the model, and the vertical particle-acceleration wavefields are generally required to reconstruct long- and short-wavelength structures in the deep parts and over the whole area of a given model. Finally, we present a sequential-inversion strategy for using the particle-acceleration wavefields. We believe that this approach can be used to reconstruct a reasonable P-wave velocity model, even when the pressure data is not available.

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.4
• /
• pp.4-14
• /
• 1974

The total forest land area in Korea accounts for some 67 percent of the nation's land total. Its productivity, however, is very low. Consequently, forest production accounts for only about 2 percent of the gross national product and a minor proportion of no more than about 5 percent versus primary industry. In this case, however, only the direct income from forestry is taken into account, making no reference to the forestry output induced by other industrial sectors. The value added Or the induced forestry output in manufacturing the primary wood products into higher quality products, makes a larger contribution to the economy than direct contribution. So, this author has tried to analyze the structure of forestry and compute the repercussion effect and the induced output of primary forest products when utilized by other industries for their raw materials, Hsing the input-output table and attached tables for 1963 and 1966 issued by the Bank of Korea. 1. Analysis of forestry structure A. Changes in total output Durng the nine-year period, 1961-1969, the real gross national product in Korea increased 2.1 times, while that of primary industries went up about 1. 4 times. Forestry which was valued at 9,380 million won in 1961, was picked up about 2. 1 times to 20, 120 million won in 1969. The rate of the forestry income in the GNP, accordingly, was no more than 1.5 percent both in 1961 and 1962, whereas its rate in primary industries increased 3.5 to 5.4 percent. Such increase in forestry income is attributable to increased forest production and rise in timber prices. The rate of forestry income, nonetheless, was on the decrease on a gradual basis. B. Changes in input coefficient The input coefficient which indicates the inputs of the forest products into other sectors were up in general in 1966 over 1963. It is noted that the input coefficient indicating the amount of forest products supplied to such industries closely related with forestry as lumber and plywood, and wood products and furniture, showed a downward trend for the period 1963-1966. On the other hand, the forest input into other sectors was generally on the increase. Meanwhile, the input coefficient representing the yolume of the forest products supplied to the forestry sector itself showed an upward tendency, which meant more and more decrease in input from other sectors. Generally speaking, in direct proportion to the higher input coefficient in any industrial sector, the reinput coefficient which denotes the use of its products by the same sector becomes higher and higher. C. Changes in ratio of intermediate input The intermediate input ratio showing the dependency on raw materials went up to 15.43 percent m 1966 from 11. 37 percent in 1963. The dependency of forestry on raw materials was no more than 15.43 percent, accounting for a high 83.57 percent of value added. If the intermediate input ratio increases in any given sector, the input coefficient which represents the fe-use of its products by the same sector becomes large. D. Changes in the ratio of intermediate demand The ratio of the intermediate demand represents the characteristics of the intermediary production in each industry, the intermediate demand ratio in forestry which accunted for 69.7 percent in 1963 went up to 75.2 percent in 1966. In other words, forestry is a remarkable industry in that there is characteristics of the intermediary production. E. Changes in import coefficient The import coefficient which denotes the relation between the production activities and imports, recorded at 4.4 percent in 1963, decreased to 2.4 percent in 1966. The ratio of import to total output is not so high. F. Changes in market composition of imported goods One of the major imported goods in the forestry sector is lumber. The import value increased by 60 percent to 667 million won in 1966 from 407 million won in 1963. The sales of imported forest products to two major outlets-lumber and plywood, and wood products and furniture-increased to 343 million won and 31 million won in 1966 from 240million won and 30 million won in 1963 respectively. On the other hand, imported goods valued at 66 million won were sold to the paper products sector in 1963; however, no supply to this sector was recorded in 1963. Besides these major markets, primary industries such as the fishery, coal and agriculture sectors purchase materials from forestry. 2. Analysis of repercussion effect on production The repercussion effect of final demand in any given sector upon the expansion of the production of other sectors was analyzed, using the inverse matrix coefficient tables attached to the the I.O. Table. A. Changes in intra-sector transaction value of inverse matrix coefficient. The intra-sector transaction value of an inverse matrix coefficient represents the extent of an induced increase in the production of self-support products of the same sector, when it is generated directly and indirectly by one unit of final demand in any given sector. The intra-sector transaction value of the forestry sector rose from 1.04 in 1963 to 1, 11 in 1966. It may well be said, therefore, that forestry induces much more self-supporting products in the production of one unit of final demand for forest products. B. Changes in column total of inverse matrix coefficient It should be noted that the column total indicates the degree of effect of the output of the corresponding and related sectors generated by one unit of final demand in each sector. No changes in the column total of the forestry sector were recorded between the 1963 and 1966 figures, both being the same 1. 19. C. Changes in difference between column total and intra-sector transaction amount. The difference between the column total and intra-sector transaction amount by sector reveals the extent of effect of output of related industrial sector induced indirectly by one unit of final demand in corresponding sector. This change in forestry dropped remarkable to 0.08 in 1966 from 0.15 in 1963. Accordingly, the effect of inducement of indirect output of other forestry-related sectors has decreased; this is a really natural phenomenon, as compared with an increasing input coefficient generated by the re-use of forest products by the forestry sector. 3. Induced output of forestry A. Forest products, wood in particular, are supplied to other industries as their raw materials, increasng their value added. In this connection the primary dependency rate on forestry for 1963 and 1966 was compared, i. e., an increase or decrease in each sector, from 7.71 percent in 1963 to 11.91 percent in 1966 in agriculture, 10.32 to 6.11 in fishery, 16.24 to 19.90 in mining, 0.76 to 0.70 in the manufacturing sector and 2.79 to 4.77 percent in the construction sector. Generally speaking, on the average the dependency on forestry during the period 1963-1966 increased from 5.92 percent to 8.03 percent. Accordingly, it may easily be known that the primary forestry output induced by primary and secondary industries increased from 16, 109 million won in 1963 to 48, 842 million won in 1966. B. The forest products are supplied to other industries as their raw materials. The products are processed further into higher quality products. thus indirectly increasing the value of the forest products. The ratio of the increased value added or the secondary dependency on forestry for 1963 and 1966 showed an increase or decrease, from 5.98 percent to 7.87 percent in agriculture, 9.06 to 5.74 in fishery, 13.56 to 15.81 in mining, 0.68 to 0.61 in the manufacturing sector and 2.71 to 4.54 in the construction sector. The average ratio in this connection increased from 4.69 percent to 5.60 percent. In the meantime, the secondary forestry output induced by primary and secondary industries rose from 12,779 million Wall in 1963 to 34,084 million won in 1966. C. The dependency of tertiary industries on forestry showed very minor ratios of 0.46 percent and 0.04 percent in 1963 and 1966 respectively. The forestry output induced by tertiary industry also decreased from 685 million won to 123 million won during the same period. D. Generally speaking, the ratio of dependency on forestry increased from 17.68 percent in 1963 to 24.28 percent in 1966 in primary industries, from 4.69 percent to 5.70 percent in secondary industries, while, as mentioned above, the ratio in the case of tertiary industry decreased from 0.46 to 0.04 percent during the period 1963-66. The mining industry reveals the heaviest rate of dependency on forestry with 29.80 percent in 1963 and 35.71 percent in 1966. As it result, the direct forestry income, valued at 8,172 million won in 1963, shot up to 22,724 million won in 1966. Its composition ratio lo the national income rose from 1.9 percent in 1963 to 2.3 per cent in 1966. If the induced outcome is taken into account, the total forestry production which was estimated at 37,744 million won in 1963 picked up to 105,773 million won in 1966, about 4.5 times its direct income. It is further noted that the ratio of the gross forestry product to the gross national product. rose significantly from 8.8 percent in 1963 to 10.7 percent in 1966. E. In computing the above mentioned ratio not taken into consideration were such intangible, indirect effects as the drought and flood prevention, check of soil run-off, watershed and land conservation, improvement of the people's recreational and emotional living, and maintenance and increase in the national health and sanitation. F. In conclusion, I would like to emphasize that the forestry sector exercices an important effect upon the national economy and that the effect of induced forestry output is greater than its direct income.

• Korean Journal of Weed Science
• /
• v.18 no.3
• /
• pp.225-236
• /
• 1998

KSC-13906 [Erythro N-{(4,6-dimethoxypyrimidin-2-yl)aminocarbonyl} -2-(2-fluoro-1-hydroxy-n-propyl) benzenesulfonamide, US Patent 5,461,025] was investigated how can control phytotoxicity fluctuation and what a good method apply to new rice herbicide. The growth inhibition was observed when the rice plants was transplanted at a shallow depth(0 - 1cm) and leaching was low(0 - 1cm/ day) from the paddy soil. KSC-13906 appeared to move readily down into the paddy soil with water by 3cm depth in the soil column(${\phi}$ 10cm) filled with loamy sand soil under 3cm/day of leaching condition. Artificial control releasing pattern, designed as treated with KSC-13906 of 9 or 18g ai/ha either at a once or daily treated dividing volume of 1/20, 1/25 and 1/30 of the total volume, increased the safety of KSC-13906 to direct seeded and transplanted rice. The safety of KSC-13906 was also enhanced when KSC-13906 was mixed with dymron. For example, the mixture of KSC-13906 and dymron effectively reduced injury of direct seeded rice plants at 18 and 500g ai/ha, respectively, treated 7 days after transplanting. However, combination of KSC-13906 and several herbicides didn't show any synergistic effetct on herbicidal activity and safening effect on rice. However, the combination of KSC-13906+dymron (9~12+250~500g ai/ha) or KSC-13906+mefenacet+dymron(9+250+250g ai/ha) controlled almost all weeds in paddy field without causing any injury to rice and thus the combination would successfully be used as an oneshot herbicide in rice culture.