• 제목/요약/키워드: direct shot

검색결과 30건 처리시간 0.03초

Brush-painted Ti-doped In2O3 Transparent Conducting Electrodes Using Nano-particle Solution for Printable Organic Solar Cells

  • 정진아;김한기
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
    • /
    • pp.458.2-458.2
    • /
    • 2014
  • We have demonstrated that simple brush-painted Ti-doped $In_2O_3$(TIO) films can be used as a cost effective transparent anodes for organic solar cells (OSCs). We examined the RTA effects on the electrical, optical, and structural properties of the brush painted TIO electrodes. By the direct brushing of TIO nanoparticle ink and rapid thermal annealing (RTA), we can simply obtain TIO electrodes with a low sheet resistance of 28.25 Ohm/square and a high optical transmittance of 85.48% under atmospheric ambient conditions. Furthermore, improvements in the connectivity of the TIO nano-particles in the top region during the RTA process play an important role in reducing the resistivity of the brush-painted TIO anode. In particular, the brush painted TIO films showed a much higher mobility ($33.4cm^2/V-s$) than that of previously reported solution-process transparent oxide films ($1{\sim}5cm^2/V-s$) due to the effects of the Ti dopant with higher Lewis acid strength (3.06) and the reduced contact resistance of TIO nanoparticles. The OSCs fabricated on the brush-painted TIO films exhibited cell-performance with an open circuit voltage (Voc) of 0.61 V, shot circuit current (Jsc) of $7.90mA/cm^2$, fill factor (FF) of 61%, and power conversion efficiency (PCE) of 2.94%. This indicates that brush-painted TIO film is a promising cost-effective transparent electrode for printing-based OSCs with its simple process and high performance.

  • PDF

접적지역 RC형 방호시설 조사와 모델링을 통한 한국형 방호벽 설계안의 제시 (Suggestion on the Prototype of the Korean Barriers through the Investigation and Modeling of RC Protective Installments in Contact Areas)

  • 박영준;이민수;이희만
    • 한국건축시공학회지
    • /
    • 제16권4호
    • /
    • pp.341-348
    • /
    • 2016
  • 이 연구에서는 폭발원점으로부터 보호시설의 결정적 피해경감을 위해 설치되는 방호벽의 설계요구조건을 제안한다. 이를 위하여 일부지역에 구축된 방호벽과 관련한 현장조사 및 설계도서 검토를 수행한다. 규명된 방호벽 제원을 바탕으로 구조해석에 사용될 방호벽을 모델링하고, 방호벽에 대한 실질적인 위협을 판단한다. 구조 모델링 및 폭발위협 분석이 완료되면, 방호벽 및 보호시설의 손상정도를 충격, 관입, 파쇄 및 폭압효과 측면에서 수치해석을 통해 계산한다. 해석결과에 따르면, 방호벽의 두께는 최소 45cm 이상이어야 하며, 현재 설치된 방호벽은 단면증설을 통해 구조보강이 필요한 것으로 나타났다.

Expression analysis and characterization of rice oligopeptide transport gene (OsOPT10) that contributes to salt stress tolerance

  • Jung, Yu-Jin;Lee, In-Hye;Han, Kyung-Hee;Son, Cho-Yee;Cho, Yong-Gu;Lee, Myung-Chul;Kang, Kwon-Kyoo
    • Journal of Plant Biotechnology
    • /
    • 제37권4호
    • /
    • pp.483-493
    • /
    • 2010
  • Knock-out of a gene by insertional mutagenesis is a direct way to address its function through the mutant phenotype. Among ca. 15,000 gene-trapped Ds insertion lines of rice, we identified one line from selected sensitive lines in highly salt stress. We conducted gene tagging by TAIL-PCR, and DNA gel blot analysis from salt sensitive mutant. A gene encoding an oligopeptide transporter (OPT family) homologue was disrupted by the insertion of a Ds transposon into the OsOPT10 gene that was located shot arm of chromosome 8. The OsOPT10 gene (NP_001062118.) has 6 exons and encodes a protein (752 aa) containing the OPT family domain. RT-PCR analysis showed that the expression of OsOPT10 gene was rapidly and strongly induced by stresses such as high-salinity (250 mM), osmotic, drought, $100\;{\mu}M$ ABA. The subcellular localization assay indicated that OsOPT10 was localized specifically in the plasma membrane. Overexpression of OsOPT10 in Arabidopsis thaliana and rice conferred tolerance of transgenic plants to salt stress. Further we found expression levels of some stress related genes were inhibited in OsOPT10 transgenic plants. These results suggested that OsOPT10 might play crucial but differential roles in plant responses to various abiotic stresses.

롱샷 무인기를 활용한 유무인 협업 공대공 전술 개발 (Manned-Unmanned Teaming Air-to-Air Combat Tactic Development Using Longshot Unmanned Aerial Vehicle)

  • 유승훈;박명환;황성인;설현주
    • 산업경영시스템학회지
    • /
    • 제44권3호
    • /
    • pp.64-72
    • /
    • 2021
  • Manned-unmanned teaming can be a very promising air-to-air combat tactic since it can maximize the advantage of combining human insight with the robustness of the machine. The rapid advances in artificial intelligence and autonomous control technology will speed up the development of manned-unmanned teaming air-to-air combat system. In this paper, we introduce a manned-unmanned teaming air-to-air combat tactic which is composed of a manned aircraft and an UAV. In this tactic, a manned aircraft equipped with radar is functioning both as a sensor to detect the hostile aircraft and as a controller to direct the UAV to engage the hostile aircraft. The UAV equipped with missiles is functioning as an actor to engage the hostile aircraft. We also developed a combat scenario of executing this tactic where the manned-unmanned teaming is engaging a hostile aircraft. The hostile aircraft is equipped with both missiles and radar. To demonstrate the efficiency of the tactic, we run the simulation of the scenario of the tactic. Using the simulation, we found the optimal formation and maneuver for the manned-unmanned teaming where the manned-unmanned teaming can survive while the hostile aircraft is shot-downed. The result of this study can provide an insight to how manned aircraft can collaborate with UAV to carry out air-to-air combat missions.

의과대학생의 디지털윤리-리터러시, 다문화수용성, 세계시민의식이 문화적역량에 미치는 영향 (The Effects of Medical Students' Digital Ethics-literacy, Multicultural Acceptance, and Global Citizenship on Cultural Competency)

  • 제남주;박미라;윤지원
    • 한국산업융합학회 논문집
    • /
    • 제27권1호
    • /
    • pp.195-205
    • /
    • 2024
  • This study is descriptive research study to understand the impact of digital ethics-literacy, multicultural acceptance, and global citizenship of medical students' on cultural competency. The subjects for this study were the medical students of J city of Province of G, collecting data from first of October to 15th of October 2023. The tools used for this study consist of 178 questions which were 9 questions of general properties, 70 questions of digital ethics-literacy, 35 questions of multicultural acceptance, 3qustions of global citizenship and 33 questions of cultural competency. As a result of this study, the score of digital ethics-literacy was 2.67±0.85(out of 5), the score of multicultural acceptance was 3.62±1.08(out of 6), the score of global citizenship was 3.72±0.75(out of 5), and the score of cultural competency was 3.49±0.71(out of 5). There is a positive correlation between multicultural acceptance and global citizenship. The global citizenship was the factor affecting significantly on cultural competency. The power of explication was 20.8%. The education for accepting and understanding cultural diversity and offering opportunity of domestic and overseas volunteering programs so that global citizenship could be improved. There is also a need of development of integrative education programs in terms of multicultural education including direct and indirect digital media education which can perform medical service for various multicultural recipient on the medical site not an one-shot instiiled displine.

지각구조 연구에서 에어건 발파와 정밀 수심 자료를 이용한 OBS 위치 결정의 새로운 방법 (A new method for determining OBS positions for crustal structure studies, using airgun shots and precise bathymetric data)

  • 압전순;구보전륭이;서산영일랑;안등윤;립원순삼;;급천신효
    • 지구물리와물리탐사
    • /
    • 제11권1호
    • /
    • pp.15-25
    • /
    • 2008
  • 지각구조 연구에서 해저면 지진계(OBS)의 위치정보는 OBS-에어건 탄성파 탐사에 있어서 매우 중요한 변수들중의 하나이다. 이 변수의 정확도을 향상시키기 위해 우리는 이용 가능한 음향 트랜스폰더에 의한 거리 정보와 함께 에어건 발파 자료와 수심 자료를 이용하여 OBS 위치를 결정하는 새로운 방법을 개발하였다. 음향 트랜스폰더로 얻은 거리 자료가 3 지점 미만의 것일 때에는 에어건 발파에 의해 발생하여 OBS에 기록된 수중 직접파의 주시가 OBS 위치 결정에 매우 중요한 정보로 활용된다. 그 새로운 방법은 두 단계로 이루어져 있다. 첫 번째 단계에서는 광역 검색이 이루어지는데 이는 수심 격자상에서 에어건 발파로부터 나온 수중 직접파의 관측 주시와 트랜스폰더 시스템을 사용하여 얻은 음향 거리로 설명할 수 있는 가장 가까운 노드를 찾는 것이다. 만약 OBS가 위치한 해저면 지형이 매우 험하다면 정밀한 2D 수심 데이터의 사용이 가장 중요하다. 국부적으로 수렴하는 최소값에 빠지지 않기 위해 첫 번째 단계에서 얻은 노드의 위치는 두 번째 단계의 초기값으로 사용된다. 두 번째 단계에서는 비선형 역산법이 수행된다. 만일 OBS의 내부 시계가 큰 편차를 보인다면 이 방법을 사용한 최종 OBS 위치와 함께 내부 시계에 대한 보정 또한 이루어져야 한다. 우리는 여기에서 OBS 위치 결정에 사용한 각 측정값의 영향과 오차에 대해서도 토론하고자 한다.

한우의 생식세포 보존에 관한 연구 II. PEG 30% FSH 투여가 한우의 체내수정란 생산에 미치는 영향 (Studies on Preservation of Germ Cells in Hanwoo II. Effects of In Vivo Embryos Production by PEG 30% FSH in Hanwoo)

  • 이명식;박정준;전기준;정영훈;우제석;박수봉;임석기;연성흠;손동수
    • 한국수정란이식학회지
    • /
    • 제18권2호
    • /
    • pp.151-156
    • /
    • 2003
  • 한우의 수정란을 보존하기 위하여 고급육계통과 다유계통의 공란우를 선발하여 과배란처리에 따른 황체의 반응, 황체수에 대한 채란된 수정란의 수 그리고 채란 수정란수에 대한 이식가능한 수정란 생산에 미치는 영향을 조사하였다. 다유계통의 공란우는 이유시 체중에 대한 육종가 상위 20%이내, 고급육 계통의 공란우는 육질에 대한 육종가 상위 20%이내의 종빈우를 선발하였다. 과배란처리 방법은 발정후 11일차에 PEG 30% FSH를 견갑부에 피하주사로 1회 투여하고 13일차에 PGF$_2$a 25mg을 투여하였으며 15일차와 16일차에 각각 2회씩 인공수정하였고 23일차에 채란하였다. 과배란처리에 따른 황체의 반응은 좌측난소가 47.1% (242/513), 우측난소가 52.8%(271/513)로써 우측의 반응이 좋게 나타났고 황체의 반응과 비교하여 채란된 수정란의 회수율은 79.9%(410/513)로 나타났다. 회수된 수정란 중에서 이식이 가능한 수정란은 86.5%(355/410)이었고 수정란의 발달단계에 있어서 상실배는 61.6%(219/355), 배반포는 38.3%(136/355)로 나타났으며 두당 이식가능한 생산수는 6.4개였다.

다성분 해저면 탄성파 탐사자료에 대한 음향파 완전파형역산 전략 (Acoustic Full-waveform Inversion Strategy for Multi-component Ocean-bottom Cable Data)

  • 황종하;오주원;이진형;민동주;정희철;송영수
    • 지구물리와물리탐사
    • /
    • 제23권1호
    • /
    • pp.38-49
    • /
    • 2020
  • 음향파 완전파형역산은 탄성파 탐사를 통해 얻은 관측자료와 음향파 모델링자료를 맞춤으로써 지층의 속도모델을 고해상도로 구축하는 최적화 과정이다. 기존의 스트리머를 이용한 해양 탄성파 탐사 자료에 대한 음향파 완전파형역산에서는 압력자료만을 활용하여 P파 속도모델을 구축한다. 그러나 최근 다성분 해저면 탄성파 탐사기술의 발달로 다성분자료의 취득 사례가 늘고 있으며, 이에 따라 해양에서 얻어지는 다성분 자료를 활용한 음향파 완전파형역산 기법에 대한 연구가 필요하다. 이 연구에서는 수평 및 수직 입자가속도 자료를 활용한 효과적인 음향파 완전파형역산 전략을 제시하고자 한다. 이를 위해, 우선 음향파 모델링으로 제작된 압력 및 입자가속도 자료와 민감도커널을 분석하여 파형역산 과정에서 각 자료의 성분별 특성을 관찰하였다. 압력 자료에 함께 나타났던 직접파, 다이빙파 및 반사파가 수직 및 수평 입자가속도 자료에서 파동의 진행방향에 따라 분리되어 나타나는 것을 확인하였으며, 수평 입자가속도 자료는 상부의 장파장구조를, 수직 입자가속도 자료는 하부의 장파장구조와 전체 영역에서의 단파장구조를 구축하는 데 효과적임을 확인할 수 있었다. 이러한 분석 결과를 바탕으로 입자가속도 자료만을 활용해 음향파 완전파형역산을 수행하는 순차적 자료 활용전략을 제시하며, 압력자료를 얻지 못하였거나 품질이 낮은 경우에도 입자가속도 자료를 활용하는 음향파 완전파형역산을 통해 양호한 P파 속도모델을 구축할 수 있을 것으로 기대된다.

산업관련표(産業關聯表)에 의(依)한 임업구조분석(林業構造分析)과 유발생산액(誘發生産額) -임업(林業)이 한국경제(韓國經濟)에 미치는 영향(影響)- (Analysis of Forestry Structure and Induced Output Based on Input - output Table - Influences of Forestry Production on Korean Economy -)

  • 이승윤
    • Journal of the Korean Wood Science and Technology
    • /
    • 제2권4호
    • /
    • pp.4-14
    • /
    • 1974
  • The total forest land area in Korea accounts for some 67 percent of the nation's land total. Its productivity, however, is very low. Consequently, forest production accounts for only about 2 percent of the gross national product and a minor proportion of no more than about 5 percent versus primary industry. In this case, however, only the direct income from forestry is taken into account, making no reference to the forestry output induced by other industrial sectors. The value added Or the induced forestry output in manufacturing the primary wood products into higher quality products, makes a larger contribution to the economy than direct contribution. So, this author has tried to analyze the structure of forestry and compute the repercussion effect and the induced output of primary forest products when utilized by other industries for their raw materials, Hsing the input-output table and attached tables for 1963 and 1966 issued by the Bank of Korea. 1. Analysis of forestry structure A. Changes in total output Durng the nine-year period, 1961-1969, the real gross national product in Korea increased 2.1 times, while that of primary industries went up about 1. 4 times. Forestry which was valued at 9,380 million won in 1961, was picked up about 2. 1 times to 20, 120 million won in 1969. The rate of the forestry income in the GNP, accordingly, was no more than 1.5 percent both in 1961 and 1962, whereas its rate in primary industries increased 3.5 to 5.4 percent. Such increase in forestry income is attributable to increased forest production and rise in timber prices. The rate of forestry income, nonetheless, was on the decrease on a gradual basis. B. Changes in input coefficient The input coefficient which indicates the inputs of the forest products into other sectors were up in general in 1966 over 1963. It is noted that the input coefficient indicating the amount of forest products supplied to such industries closely related with forestry as lumber and plywood, and wood products and furniture, showed a downward trend for the period 1963-1966. On the other hand, the forest input into other sectors was generally on the increase. Meanwhile, the input coefficient representing the yolume of the forest products supplied to the forestry sector itself showed an upward tendency, which meant more and more decrease in input from other sectors. Generally speaking, in direct proportion to the higher input coefficient in any industrial sector, the reinput coefficient which denotes the use of its products by the same sector becomes higher and higher. C. Changes in ratio of intermediate input The intermediate input ratio showing the dependency on raw materials went up to 15.43 percent m 1966 from 11. 37 percent in 1963. The dependency of forestry on raw materials was no more than 15.43 percent, accounting for a high 83.57 percent of value added. If the intermediate input ratio increases in any given sector, the input coefficient which represents the fe-use of its products by the same sector becomes large. D. Changes in the ratio of intermediate demand The ratio of the intermediate demand represents the characteristics of the intermediary production in each industry, the intermediate demand ratio in forestry which accunted for 69.7 percent in 1963 went up to 75.2 percent in 1966. In other words, forestry is a remarkable industry in that there is characteristics of the intermediary production. E. Changes in import coefficient The import coefficient which denotes the relation between the production activities and imports, recorded at 4.4 percent in 1963, decreased to 2.4 percent in 1966. The ratio of import to total output is not so high. F. Changes in market composition of imported goods One of the major imported goods in the forestry sector is lumber. The import value increased by 60 percent to 667 million won in 1966 from 407 million won in 1963. The sales of imported forest products to two major outlets-lumber and plywood, and wood products and furniture-increased to 343 million won and 31 million won in 1966 from 240million won and 30 million won in 1963 respectively. On the other hand, imported goods valued at 66 million won were sold to the paper products sector in 1963; however, no supply to this sector was recorded in 1963. Besides these major markets, primary industries such as the fishery, coal and agriculture sectors purchase materials from forestry. 2. Analysis of repercussion effect on production The repercussion effect of final demand in any given sector upon the expansion of the production of other sectors was analyzed, using the inverse matrix coefficient tables attached to the the I.O. Table. A. Changes in intra-sector transaction value of inverse matrix coefficient. The intra-sector transaction value of an inverse matrix coefficient represents the extent of an induced increase in the production of self-support products of the same sector, when it is generated directly and indirectly by one unit of final demand in any given sector. The intra-sector transaction value of the forestry sector rose from 1.04 in 1963 to 1, 11 in 1966. It may well be said, therefore, that forestry induces much more self-supporting products in the production of one unit of final demand for forest products. B. Changes in column total of inverse matrix coefficient It should be noted that the column total indicates the degree of effect of the output of the corresponding and related sectors generated by one unit of final demand in each sector. No changes in the column total of the forestry sector were recorded between the 1963 and 1966 figures, both being the same 1. 19. C. Changes in difference between column total and intra-sector transaction amount. The difference between the column total and intra-sector transaction amount by sector reveals the extent of effect of output of related industrial sector induced indirectly by one unit of final demand in corresponding sector. This change in forestry dropped remarkable to 0.08 in 1966 from 0.15 in 1963. Accordingly, the effect of inducement of indirect output of other forestry-related sectors has decreased; this is a really natural phenomenon, as compared with an increasing input coefficient generated by the re-use of forest products by the forestry sector. 3. Induced output of forestry A. Forest products, wood in particular, are supplied to other industries as their raw materials, increasng their value added. In this connection the primary dependency rate on forestry for 1963 and 1966 was compared, i. e., an increase or decrease in each sector, from 7.71 percent in 1963 to 11.91 percent in 1966 in agriculture, 10.32 to 6.11 in fishery, 16.24 to 19.90 in mining, 0.76 to 0.70 in the manufacturing sector and 2.79 to 4.77 percent in the construction sector. Generally speaking, on the average the dependency on forestry during the period 1963-1966 increased from 5.92 percent to 8.03 percent. Accordingly, it may easily be known that the primary forestry output induced by primary and secondary industries increased from 16, 109 million won in 1963 to 48, 842 million won in 1966. B. The forest products are supplied to other industries as their raw materials. The products are processed further into higher quality products. thus indirectly increasing the value of the forest products. The ratio of the increased value added or the secondary dependency on forestry for 1963 and 1966 showed an increase or decrease, from 5.98 percent to 7.87 percent in agriculture, 9.06 to 5.74 in fishery, 13.56 to 15.81 in mining, 0.68 to 0.61 in the manufacturing sector and 2.71 to 4.54 in the construction sector. The average ratio in this connection increased from 4.69 percent to 5.60 percent. In the meantime, the secondary forestry output induced by primary and secondary industries rose from 12,779 million Wall in 1963 to 34,084 million won in 1966. C. The dependency of tertiary industries on forestry showed very minor ratios of 0.46 percent and 0.04 percent in 1963 and 1966 respectively. The forestry output induced by tertiary industry also decreased from 685 million won to 123 million won during the same period. D. Generally speaking, the ratio of dependency on forestry increased from 17.68 percent in 1963 to 24.28 percent in 1966 in primary industries, from 4.69 percent to 5.70 percent in secondary industries, while, as mentioned above, the ratio in the case of tertiary industry decreased from 0.46 to 0.04 percent during the period 1963-66. The mining industry reveals the heaviest rate of dependency on forestry with 29.80 percent in 1963 and 35.71 percent in 1966. As it result, the direct forestry income, valued at 8,172 million won in 1963, shot up to 22,724 million won in 1966. Its composition ratio lo the national income rose from 1.9 percent in 1963 to 2.3 per cent in 1966. If the induced outcome is taken into account, the total forestry production which was estimated at 37,744 million won in 1963 picked up to 105,773 million won in 1966, about 4.5 times its direct income. It is further noted that the ratio of the gross forestry product to the gross national product. rose significantly from 8.8 percent in 1963 to 10.7 percent in 1966. E. In computing the above mentioned ratio not taken into consideration were such intangible, indirect effects as the drought and flood prevention, check of soil run-off, watershed and land conservation, improvement of the people's recreational and emotional living, and maintenance and increase in the national health and sanitation. F. In conclusion, I would like to emphasize that the forestry sector exercices an important effect upon the national economy and that the effect of induced forestry output is greater than its direct income.

  • PDF

Benzenesulfonylurea계 화합물(化合物) KSC-13906의 약해발생요인(藥害發生要因) 및 경감방법(輕減方法) (Phytotoxicity Inducing Factors and Its Safening Methods for Benzenesulfonylurea Compound KSC-13906)

  • 황인택;최정섭;홍경식;유주현;김진석;조광연
    • 한국잡초학회지
    • /
    • 제18권3호
    • /
    • pp.225-236
    • /
    • 1998
  • 시험 화합물 KSC-13906에 대하여 이앙심도(移秧深度)와 감수심(減水深)의 차이에 의한 약해 및 약효 변동, 토양중 이동성 등의 효력 변동 요인과 인위적인 용출 조절 처리, dymron 및 타 제초제와의 혼합 처리에 의한 약해 경감 효과와 상호작용 특성 등을 온실에서 조사하여 결과를 요약 정리하면 다음과 같다. 2.5 엽기 어린 모의 경우 3cm 깊이로 이앙하고 이앙 10일 이후에 처리하는 것이 바람직하였다. 0 - 1cm/day의 무누수 조건보다 3 - 5cm/day의 감수심 조건에서 약효와 약해가 모두 감소되었다. KSC-13906는 3cm/day의 용출조건 에서 2cm 정도의 이동폭을 가지고 있었다. 인위적인 용출조절(溶出調節)에 의하여 KSC-13906의 배량 약해 경감 효과가 뚜렸하였으나 직파벼에 대한 약해를 완전히 제거시킬 수는 없었다. 약해 경감을 위한 dymron의 혼합처리 효과는 아주 우수하여 7 DAT 처리 KSC-13906 18g ai/ha까지도 직파벼가 안전하였고, 12 DAT 처리에서도 18g ai/ha까지 안전성을 증대시켰다. KSC-13906과 mefenacet의 2원 혼합 처리에서는 약해 경감 효과가 나다나지 않았지만, KSC-13906과 mefenacet 그리고 dymron 3원 혼합의 경우 처리한 전 조합에서 약해 문제는 피할 수 있었다. KSC-13906를 thiobencarb, piperophos, 2,4-D, diuron, quinclorac 등과 혼합할 경우 약해 - 약효측면에서 실용적인 장점을 찾을 수 없었으나 9 - 12g ai/ha의 KSC-13906과 250 - 500g ai/ha의 dymron을 혼합하거나, KSC 13906+mefenacet+dymron을 9+250+250g ai/ha로 조합 처리할 경우 실용화 가능성이 인정되었다.

  • PDF