• 대한전기학회논문지
• /
• 제41권7호
• /
• pp.723-734
• /
• 1992

In this paper, the characteristics of IPMSM(Interior-type Permanent Magnet Synchronous Motor) are simulated using 2-D. finite element method. This paper deals with the following characteristics : air gap flux density considering skew, back e.m.f., torque and inductance. Back e.m.f. is calculated using the flux obtained from the vector potential of FEM solution. Torque is calculated using improved Maxwell stress tensor method and current angle which is obtained from the controller. Direct axis inductance and quadrature axis inductance are also calculated using energy perturbation method. Computed results are found in satisfactory agreement with experimental ones. This method also can be applied for the computation and analysis of the characteristics of SPMSM, current-excited synchronous motor and reluctance motor.

• 전기학회논문지
• /
• 제59권6호
• /
• pp.1075-1082
• /
• 2010

This paper analyzes a operating characteristic for maximum power point tracking (MPPT) of photovoltaic generation system. MPPT methods are used to maximize PV array output power by tracking maximum power point(MPP) continuously. To increase the output efficiency of PV system, it is important to have more efficient MPPT. MPPT algorithm is widely used the control method such as the perturbation and observation(PO) method, incremental conductance(IC) method and constant voltage(CV) method. In case of the radiation is changed, this paper proposes a response characteristic with MPPT control algorithms. Also, it proposes the direct for a novel MPPT control algorithm development through the analyzed data, hereby proves the effectiveness of this paper.

• 대한화학회지
• /
• 제14권1호
• /
• pp.127-131
• /
• 1970

The variational approach for the direct evaluation of the energy difference ${\Delta}$E is studied. The method is based on the differential equation corresponding to the integral Hellmann-Feynman formula. The ${\Delta}$E is given by the expectation value of the Hermitian operator which does not involve the 1/$r_{ij}$ term. Because of its variational nature of the method, the coupling problem of the differential equations which are encountered in perturbation treatment does not occur. The method is applied to the evaluation of the electric polarizabilities of the Helium isoelectronic series atoms. The result is in good agreement with the experiment. The method is compared with the recent works of Karplus et al.

• International Journal of Aeronautical and Space Sciences
• /
• 제7권2호
• /
• pp.26-32
• /
• 2006

This paper targets a direct and quantitative prediction of characteristics of unstable waves in a combustion chamber, which employs the governing equations derived in terms of amplification factors of flow variables. A freshly formulated nonlinear acoustic equation is obtained and the analysis of unsteady waves in a rocket engine is attempted. In the present formalism, perturbation method decomposes the variables into time-averaged part that can be obtained easily and accurately and time-varying part which is assumed to be harmonic. Excluding the use of conventional spatially sinusoidal eigenfunctions, a direct numerical solution of wave equation replaces the initial spatial distribution of standing waves and forms the nonlinear space-averaged terms. Amplification factor is also calculated independently by the time rate of changes of fluctuating variables, and is no longer an explicit function for compulsory representation. Employing only the numerical computation, major assumptions inevitably inherent, and in erroneous manner, in up to date analytical methods could be avoided. With two definitions of amplification factor, 1-D stable wave and 3-D unstable wave are examined, and clearly demonstrated the potentiality of a suggested theoretical-numerical method of combustion instability.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.91-95
• /
• 1991

In this paper, the characteristics of IPMSM(Interior-type Permanent Magnet Synchronous Motor) are simulated using 2-Dimensional finite element method. This paper deals with the following characteristics: Air gap flux density considering skew. Back E.M.F, Torque and Inductance. Torque is calculated using current angle which is known from the controller. Direct axis inductance and Quadrature axis inductance are also calculated using energy perturbation method. This results can be used for the computation of the saliency of IPMSM. Computed results are found in satisfactory agreement with experimental ones.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제23권3호
• /
• pp.237-246
• /
• 2016

Ebadian et al. proved the Hyers-Ulam stability of bimultipliers and Jordan bimultipliers in C*-ternary algebras by using the fixed point method. Under the conditions in the main theorems for bimultipliers, we can show that the related mappings must be zero. Moreover, there are some mathematical errors in the statements and the proofs of the results. In this paper, we correct the statements and the proofs of the results, and prove the corrected theorems by using the direct method.

• 전산구조공학
• /
• 제7권3호
• /
• pp.115-122
• /
• 1994

불확정 구조계획의 선형 고유치 문제는 재료정수나 경게조건 및 외부하중 등에 결정론적으로 사용할 수 없는 확률량을 포함하고 있다. 변동량을 내포한 고유치 문제의 해석은 기대치에 대한 지배 방정식과 변동량 결정방정식을 고려해야 한다. 비선형성이 심한 구조계를 선형화할 대 일차 및 이차 변동값을 반영함으로 고유치의 정도를 향상시킬 수 있다. 매개변수에 불확정성을 포함한 고유치 문제는 최적설계 정식화에서 변동된 값을 고료해 줌으로 신뢰성 있는 설계가 된다. 최적설계 알고리즘 중에는 목적함수와 제한 조건식의 설계 민감도를 요한다. 이차 기울기에 근거를 둔 최적설계 수행시에 변동량에 고려하여 제한식으로 설정하고, 설계 민감도를 구할 수 있는 방법을 제시하였다.

• Tribology and Lubricants
• /
• 제12권1호
• /
• pp.29-35
• /
• 1996

The static and dynamic stability analysis of air-lubriceted tilting pad journal bearing which considers tilting effect of each pad and preload but neglects pad inertia were performed. And these characteristic analysis were performed with elasticity effect too. A direct numerical method is used in calculating the static characteristics such as load carrying capacity, firction force and perturbation method is used for calculation of dynamic characteristics. The stability analysis was performed with the variation of bearing number, eccentricity ratio and attitude angle considering pad elasticity effect.

• 제어로봇시스템학회논문지
• /
• 제7권6호
• /
• pp.465-470
• /
• 2001

This paper considers a new weighed model reduction method using block diagonal solutions of Lyapunov inequalities. With the input and/or output weighting function, the stability of the reduced order system is guaranteed and an a priori error bound is proposed. to achieve this after finding the solutions of two Lyapunov inequalities and balancing the full order system, we find the reduced order systems using the direct truncation and the singular perturbation approximation. The proposed method is compared with other existing methods using numerical examples.

• Structural Engineering and Mechanics
• /
• 제62권2호
• /
• pp.171-178
• /
• 2017

Nonlinear vibrations of an Euler-Bernoulli beam resting on a nonlinear elastic foundation are discussed. In search of approximate analytical solutions, the classical multiple scales (MS) and the multiple scales Lindstedt Poincare (MSLP) methods are used. The case of primary resonance is investigated. Amplitude and phase modulation equations are obtained. Steady state solutions are considered. Frequency response curves obtained by both methods are contrasted with each other with respect to the effect of various physical parameters. For weakly nonlinear systems, MS and MSLP solutions are in good agreement. For strong hardening nonlinearities, MSLP solutions exhibit the usual jump phenomena whereas MS solutions are not reliable producing backward curves which are unphysical.