• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 F
• /
• pp.2587-2589
• /
• 1999

In this paper, we propose a new control scheme for a PWM inverter using digital control. Digital control has various advantages in comparison with conventional analogue control. It can achieve high frequency switching of inverter and can be little influenced for temperature variations and aging of devices. This digitally-controlled PWM inverter is implemented using a Digital Signal Processor(DSPTMS320F240). The simulation results are given to verify the DSP based PWM inverter design and implementation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.496-498
• /
• 2005

This paper presents intelligent digital redesign method of global approach for hybrid state space fuzzy-model-based controllers. For effectiveness and stabilization of continuous-time uncertain nonlinear systems under discrete-time controller, Takagi-Sugeno(TS) fuzzy model is used to represent the complex system. And global approach design problems viewed as a convex optimization problem that we minimize the error of the norm bounds between nonlinearly interpolated linear operators to be matched. Also by using the power series, we analyzed nonlinear system's uncertain parts more precisely. When a sampling period is sufficiently small, the conversion of a continuous-time structured uncertain nonlinear system to an equivalent discrete-time system have proper reason. Sufficiently conditions for the global state-matching of the digitally controlled system are formulated in terms of linear matrix inequalities (LMIs).

• 전기학회논문지
• /
• 제59권5호
• /
• pp.1005-1009
• /
• 2010

This paper presents a digitally-controlled filter calibration technique for biquad RC filter using self oscillation. The biquad RC filter is converted to a fully-differential ring oscillator by changing its resistor connections, where the oscillation frequency reflects the cut-off frequency. The proposed calibration circuit measures the oscillation frequency by counting with a fixed higher-frequency clock and then tunes it to a desired frequency with a digital frequency-locked loop including a PI controller. Because the proposed circuit directly measures the cut-off frequency of the filter itself and calibrates it with the small area digital circuits, the area and the power consumption are much small compared with conventional works. When it is implemented in a 65nm CMOS process, the calibration circuit except the filter consumes the area of 80um X 50um and power consumption is 443uA at 1.2 V supply voltage.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.439-440
• /
• 2008

A high-speed DCO is proposed that uses the negative-skewed delay scheme. The DCO consists of a ring of inverters with each PMOS transistor driven from the output of 3 earlier stage through a set of minimum-sized pass-transistors. The digitization of negative-skewed delay is achieved by selecting pass-transistors turned on and digitizing the gate voltages of the selected pass-transistors. The proposed 7-stage DCO has been simulated using 1.8V, $0.18\;{\mu}m$ TSMC CMOS process to obtain a resolution of 3ps and an operation range of 2.88-5.03GHz.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.851-854
• /
• 1999

A high efficient, CMOS RF power amplifier at a 2.SV power supply for the band of 902-928MHz was designed and analyzed in 0.25${\mu}{\textrm}{m}$ standard CMOS technology. The output power of designed amplifier is being digitally controlled from a minimum of 2㎽ to a maximum of 21㎽, corresponding to a dynamic range of l0㏈ power control. The frequency response of this power amplifier is centered roughly at 915MHz. The power added efficiency of designed amplifer is almost 48% at maximum output power of 21㎽.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.883-884
• /
• 2008

디지털 제어기는 벡터 제어(Vector Control) 구현에 적합하기 때문에, 현재 대다수의 고성능 교류 전동기 구동 시스템에 사용되고 있다. 디지털 제어기를 사용하는 교류 전동기 구동 시스템에 대한 기존의 연구는 주로 디지털 제어기의 시지연이 제어 성능에 미치는 효과에 주목하였다. 그리고 디지털 제어기의 전류 샘플링 오차에 주목한 연구들은 주로 전력 변환기기의 전압 변조(PWM, Pulse Width Modulation)와 디지털 제어기의 샘플링 순간과의 관계에 따른 전류 샘플링 오차에 대해 연구하였다. 본 논문에서는 기존의 연구에서는 다루어지지 않았던 디지털 제어기의 제로-오더-홀드(Zero-Order Hold) 특성에 의해 발생하는 전류 샘플링 오차를 다룬다. 이 오차는 전동기의 전기적 회전 주파수가 디지털 제어기의 샘플링 주파수에 비해 무시할 수 없을 정도로 커지는 경우 그 영향이 두드러지게 된다. 본 논문에서는 이러한 전류 샘플링 오차를 분석하고, 이것을 보상하는 방법에 대해 서술한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.347-348
• /
• 2010

본 논문에서는 기본적인 직류-직류 변환기 중 하나인 동기식 강압형 직류-직류 변화기를 디지털 제어로 구현함으로서 아날로그 제어기를 디지털 제어기로 변환 하는 과정에 관하여 설명한다. 먼저 전원단의 소신호 특성을 해석하여 제어대 출력전압의 전달함수를 찾아내고, 이것을 토대로 아날로그 제어기를 설계 하여 Simulink를 통하여 시뮬레이션을 수행하고, 설계된 아날로그 제어기를 바탕으로 Matlab을 이용한 Emulation 기법을 사용하여 디지털 제어기를 설계 한다. DSP(TMS320F28335)를 사용한 동기식 강압형 직류-직류 변환기에 설계된 디지털 제어기를 적용하여 안정도와 부하변동에 따른 응답 특성을 확인 한다.

• Journal of Power Electronics
• /
• 제11권1호
• /
• pp.28-36
• /
• 2011

In this paper, a three phase cycloconverter type high frequency AC link inverter is discussed. The configuration consists of a high frequency full-bridge inverter and a high frequency transformer followed by a three phase cycloconverter whose switch is composed of anti-series connected MOSFETs with a common source. A simple digital control strategy based on space vector modulation (SVM) and repetitive control for the cycloconverter is proposed although its input voltage is a high frequency AC pulse. The operation principle of the proposed control strategy is analyzed and the equivalent working modes during one interval are also presented. The effectiveness of the proposed control strategy is verified through Matlab/Simulink simulations and experiments on a 1.45kW prototype.

• 대한전기학회논문지
• /
• 제39권2호
• /
• pp.164-174
• /
• 1990

The improvement of linearized characteistics of induction motor control system with field oriented method is presented in this paper. A fully digitally controlled induction motor driver system based on the proposed linear control condition is described. The control system consists of IBM-PC/AT microcomputer, VSI PWM Inverter, and PI controller with softwave. By controlling the torque component, the rated flux component can be kept constant, even in the transient state. It is clearly confirmed by experiment that the improvement of the vector control condition is satisfactory. A simplified control model of an induction motor similar to the model for a separately excited DC motor drive system is obtained.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.424-429
• /
• 2003

As a critical member of cable-stayed bridges, stay cables play an important role of supporting the entire structure. Traffic, wind or rain-wind induced vibrations of stay cables would be a major cause of degrading both safety and serviceability of the bridge. One of the effective alternatives to solve this problem is to employ the cable dampers. In order to design the cable damper optimally. it is necessary to exactly estimate the dynamic characteristics of the existing cables. Therefore, in this study, a cable exciting system (exciter) controlled digitally was developed. And to evaluate the performance of the cable exciter developed, a solution of the differential equation of cable motion considering the exciter was derived. Using the cable exciter. sine sweeping and resonance tests on a cable model were carried out to obtain the dynamic characteristics effectively.