• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.10
• /
• pp.1487-1493
• /
• 2013

A new simple control method for active power filter, which can realize the complete compensation of harmonics is proposed. In the proposed scheme, a model-based digital current control strategy is presented. The proposed control system is designed and implemented in a form referred to as internal model control structure. This method provides a convenient way for parameterizing the controller in term of the nominal system model, including time-delays. As a result, the resulting controller parameters are directly set based on the power circuit parameters, which make tuning of the controllers straightforward task. In the proposed control algorithm, overshoots and oscillations due to the computation time delay is prevented by explicit incorporating of the delay in the controller transfer function. In addition, a new compensating current reference generator employing resonance model implemented by a DSP(Digital Signal Processor) is introduced. Resonance model has an infinite gain at resonant frequency, and it exhibits a band-pass filter. Consequently, the difference between the instantaneous load current and the output of this model is the current reference signal for the harmonic compensation.

• Smart Structures and Systems
• /
• v.3 no.3
• /
• pp.373-384
• /
• 2007

For structural health monitoring (SHM) of civil infrastructures, displacement is a good descriptor of the structural behavior under all the potential disturbances. However, it is not easy to measure displacement of civil infrastructures, since the conventional sensors need a reference point, and inaccessibility to the reference point is sometimes caused by the geographic conditions, such as a highway or river under a bridge, which makes installation of measuring devices time-consuming and costly, if not impossible. To resolve this issue, a visionbased real-time displacement measurement system using digital image processing techniques is developed. The effectiveness of the proposed system was verified by comparing the load carrying capacities of a steel-plate girder bridge obtained from the conventional sensor and the present system. Further, to simultaneously measure multiple points, a synchronized vision-based system is developed using master/slave system with wireless data communication. For the purpose of verification, the measured displacement by a synchronized vision-based system was compared with the data measured by conventional contact-type sensors, linear variable differential transformers (LVDT) from a laboratory test.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.4
• /
• pp.318-325
• /
• 2008

A 1.2 V 7-bit 1 GS/s CMOS flash ADC with an interpolation factor of 4 is implemented by using a $0.13\;{\mu}m$ CMOS process. A digital calibration of DC reference voltage is proposed for the $1^{st}$ preamp array to compensate for the input offset voltage of differrential amplifiers without disturbing the high-speed signal path. A 3-stage cascaded voting process is used in the digital encoder block to eliminate the conescutive bubbles up to seven completely, if the $2^{nd}$ preamp output is assumed to have a single bubble at most. ENOB and the power consumption were measured to be 5.88 bits and 212 mW with a 195 MHz $400\;mV_{p-p}$ sine wave input.

• Journal of the Korean Society for Library and Information Science
• /
• v.37 no.1
• /
• pp.247-268
• /
• 2003

Recently, the way information is accessed has changed significantly because of the rapid growth of the Internet and a move toward electronic Publishing. With that condition, there in be a need to efficiently determine and extract relevant information from digital documents. This study has proposed that template mining can be used for extracting different kinds of information from digital documents, and described research of reference ]inking system and then built temp]ate for citation information using analysis result of sample articles. Also, this study has shown the potential of template mining to automatically create citation databases.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.16 no.1
• /
• pp.79-92
• /
• 2020

As the number of systems increases and the network size increases, automated attack prediction systems are urgently needed to respond to cyber attacks. In this study, we developed four types of information gathering sensors for collecting asset and vulnerability information, and developed technology to automatically generate attack graphs and predict attack targets. To improve performance, the attack graph generation method is divided into the reachability calculation process and the vulnerability assignment process. It always keeps up to date by starting calculations whenever asset and vulnerability information changes. In order to improve the accuracy of the attack target prediction, the degree of asset risk and the degree of asset reference are reflected. We refer to CVSS(Common Vulnerability Scoring System) for asset risk, and Google's PageRank algorithm for asset reference. The results of attack target prediction is displayed on the web screen and CyCOP(Cyber Common Operation Picture) to help both analysts and decision makers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.3
• /
• pp.612-621
• /
• 1996

In this paper, we propose the low sidelobe digital FIR doppler filter bank synthesis algorithm through the Gradient Descent method and it can be practially appliable to coherent pulse doppler radar signal processing. This algorithm shows the appropriate calculation of tap coefficients or zeros for FIR transversal fiter which has been employed in radar signal processor. The span of the filters in the filter bank be selected at the desired position the designer want to locate, and the lower sidelobe level that has equal ripple property is achieved than one for which the conventional weithtedwindow is used. Especially, when we implemented filter zeros as design parameters it is possible to make null filter gain at zero frequency intensionally that would be very efficient for the eliminatio of ground clutter. For the example of 10 tap filter synthesis, when filter coefficients or zeros are selected as design parameters the corresponding sidelobelevel is reducedto -70db or -100db respectively and it has good convergent characteristics to the desired sidelobe reference value. The accuracy ofapproach to the reference value and the speed of convergence that show the performance measure of this algorithm are tuned out with some superiority and the fact that the bandwidth of filter appears small with respect to one which is made by conventional weighted window method is convinced. Since the filter which is synthesized by this algorithm can remove the clutter without loss of target signal it strongly contributes performance improvement with which detection capability would be concerned.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.2018-2020
• /
• 1998

In design of a digital current controller for a 3$\phi$ voltage-source (VS) PWM converter, its conventional model, i.e., stationary or synchronous reference frame model, is used in obtaining its discretized version. It introduces, however, inherent errors since the following practical problems are not taken into consideration: the characteristics of the space vector-based pulsewidth modulation (SVPWM) and the time delays in the process of sampling and computation. In this paper, the new hybrid reference frame model of the 3$\phi$ VS PWM converter is proposed considering these problems. In addition, the direct digital current controller based on this model is designed without any prediction or extrapolation algorithm to compensate the time delay. So the control algorithm is made very simple. The validity of the proposed algorithm is proved by the computer simulation results.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.1
• /
• pp.9-23
• /
• 2013

In recent days, there are many researches of wireless LAN services as the communication environment of wireless LAN are so improved that a lot of services are available in wireless environments. The frequency of the wireless LAN is a general resource that can be used to everyone without any permission. Many technologies using this ISM (Industry Science Medical) frequency band are developed fast and widely. But, as many devices use the same frequency band at th same time, the service quality is degraded and the speed of the service rate id degraded by the result of the interference. For overcome this problem, we must provide the new technology of the mobile devices and a new cell design scheme for obtaining maximum throughput that considering the wireless environments effectively. In this paper, we explain the main technology at the IEEE 802.11n environments and proposes the optimal cell design and reference model for gaining maximum performance to many mobile devices at the same time by investigating real environment testing results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.214-216
• /
• 2019

Recently, as the use of digital equipment increases in various fields, the importance of image and signal processing is increasing. However, many kinds of noise occur in the digital signal during transmission and reception, and this noise greatly affects the final output of the system. In this paper, we propose an algorithm that effectively restores the image by removing noise according to pixel similarity in a mixed noise environment with impulse noise and AWGN. The proposed algorithm sets the reference value according to the noise type and applies the filtering to pixels similar to the reference value to obtain the final output. Simulation results show that the proposed algorithm has good noise canceling performance and compared with conventional methods using PSNR.

• Journal of Smart Tourism
• /
• v.1 no.3
• /
• pp.31-44
• /
• 2021

The emergence of the digital economy and easy accessibility to Web 2.0 tools has seen an expansion of the influencer ecosystem within the travel and tourism industry. Founded on the principles of reference groups and peer reference there is a growing trend amongst industry practitioners who are now opting to move away from many of the traditional approaches used to market their products and services and are instead taking advantage of the concept of e-word-of-mouth (eWOM). Whilst there is a growing body of academic literature addressing the notion of influencer marketing, there is little understanding of influencer marketers themselves. Consequentially, this study addresses this gap in the literature through the quantitative examination of those who promote products, services, or companies by distributing eWOM through their online digital channels and presence; otherwise known as travel influencers. A quantitative research approach involving an online survey yielded 255 responses from travel influencers. The research findings indicate that those who work in this field prefer not to be awarded the label "travel influencer," focusing instead on their specific method of influencing, such as blogging and vlogging or sharing Instagram updates. The research also demonstrates how the new influencers have a strong role in generating travel urge and desire. The research contributes to the wider body of academic literature and travel industry practitioners by establishing the general profile of influencers and their increasingly specialized role in tourism and hospitality marketing.