• Journal of Electrical Engineering and Technology
• /
• v.7 no.3
• /
• pp.451-458
• /
• 2012

The voluntary EMG (vEMG) signal from electrically stimulated muscle is very useful for feedback control in functional electrical stimulation. However, the recorded EMG signal from surface electrodes has unwanted stimulation artifact and M-wave as well as vEMG. Here, we propose an event-synchronous adaptive digital filter for the suppression of stimulation artifact and M-wave in this application. The proposed method requires a simple experimental setup that does not require extra hardware connections to obtain the reference signals of adaptive digital filter. For evaluating the efficiency of this proposed method, the filter was tested and compared with a least square (LS) algorithm using previously measured data. We conclude that the cancellation of both primary and residual stimulation artifacts is enhanced with an event-synchronous adaptive digital filter and shows promise for clinical application to rehabilitate paretic limbs. Moreover because this algorithm is far simpler than the LS algorithm, it is portable and ready for real-time application.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.735-739
• /
• 2003

This paper presents a direct seek control algorithm for swing-arm type dual stage servo system that consists of a coarse actuator and a fine actuator. The proposed scheme is to design a control system that attenuates the effect of dynamic coupling between the two actuators so that the seek operation can be performed in a single-shot with stability. In an optical drive system with dual stage servo mechanism, the effect of dynamic coupling between the two actuators needs to be handled during the coarse seek operation due to its inherent structure. In an extreme case, the two actuators can collide each other, which leads to critical degradation of the seek performance. To handle this problem, our proposed control scheme is to generate the drive signals such that the two actuators behave as if they are a single fixed body. To this end, a feedforward controller and two feedback controllers are designed that enable the current drive system perform wide range of track seek. Simulation results are provided to show the validity and feasibility of our proposed algorithm.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.1
• /
• pp.225-229
• /
• 2019

Magnetic bearings are widely used in vacuum and clean environments or in high-precision applications, because they have no mechanical friction and have stable dynamic characteristics. Despite the aforementioned advantages of magnetic bearings, their applications are generally limited due to the controller complexity. In this paper, we proposed a reduced-complexity digital controller for magnetic bearings. In addition, we analyzed and solved the problems, such as quantization errors in the analog-to-digital conversion and integral windup in a feedback controller, which are known as the main causes of performance degradation. Experiments showed that the proposed digital controller achieves a target magnetic levitation accuracy.

• Journal of Information Technology Applications and Management
• /
• v.28 no.3
• /
• pp.109-125
• /
• 2021

For the government of president Moon's AI SW HRD policy, he proclaimed AI democracy that anyone can utilize artificial intelligence technology to spread AI education for the people of the country. Through cognitive map analysis, this study presents expected policy outcomes due to the input of policy factors to overcome crisis factors and utilize opportunity factors. According to the cognitive guidance analysis, first, the opportunity factor is recognized as accelerating the digital transformation to Covid 19 if AI SW HRD is well nurtured. Second, the crisis factor refers to the rapid paradigm shift caused by the intelligence information society, resulting in job losses in the manufacturing sector and deepening imbalance in manpower supply and demand, especially in the artificial intelligence sector. Third, the comprehensive cognitive map shows a circular process for creating an AI SW ecosystem in response to threats caused by untact caused by Corona and a circular process for securing AI talent in response to threats caused by deepening imbalance in manpower supply and demand in the AI sector. Fourth, in order to accelerate the digital circulation that has been accelerated by Corona, we found a circular process to succeed in the Korean version of digital new deal by strengthening national and corporate competitiveness through AI-utilized capacity and industrial and regional AI education. Finally, the AI utilization empowerment strengthening rotation process is the most dominant of the four mechanisms, and we also found a relatively controllable feedback loop to obtain policy outputs.

• Journal of Power Electronics
• /
• v.17 no.3
• /
• pp.821-834
• /
• 2017

This paper reports on a single-inductor multiple-output step-up converter with digital control. A systematic analog-to-digital-controller design is explained. The number of digital blocks in the feedback path of the proposed converter has been decreased. The simpler digital pulse-width modulation (DPWM) architecture is then utilized to reduce the power consumption. This architecture has several advantages because counters and a complex digital design are not required. An initially designed unit-delay cell is adopted recursively for the construction of coarse, intermediate, and fine delay blocks. A digital limiter is then designed to allow only useful code for the DPWM. The input voltage is 1.8 V, whereas output voltages are 2 V and 2.2 V. A co-simulation was also conducted utilizing PowerSim and Matlab/Simulink, whereby the 55 nm process was employed in the experimental results to evaluate the performance of the architecture.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.269-275
• /
• 1997

This paper presents real time digital signal processor(DSP) control of UPS system feeding processor(DSP) control of UPS system feeding nonlinear loads to provide sinusoidal inverter output voltage. The control scheme is composed of an rms voltage compensator, the load current harmonics feed-forward loop for the cancellation of output voltage harmonics, and the output voltage harmonics feedback loop for system stability. The controller employs a Texas Instruments TMS320C40GFL50 DSP.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.7
• /
• pp.476-483
• /
• 1987

This paper analyzes centralized sampled-data control systems with feedback loops which are closed through a digital computer which generates deadbeat control law. Intermittant computer interruptions result in failure to update the desired deadbeat design procedures for the deadbeat control law under normal operation of the control computer and the assumption of any admissible computer interruption are resented. A method that guarantees asymptotic stability under all admissible computer interruptions also is presented.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2495-2497
• /
• 2004

A system, featuring the hybrid isolator for control in the vertical direction, of active microvibration control was proposed. The main components of this system are a stage vibration isolation table with built-in acceleration sensors for detecting microvibration, hybrid isolators and a digital controller with high precision signal converters. The vibration control algorithm is focused on settling-time critical application and feedback/feedforward combination.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.843-847
• /
• 1988

A new control method for position control of D.C. servo motor based on the variable structure control is presented. The desired trajectory satisfying the given performance requirement is used as the sliding curve. And the control input forcing the system to follow the desired model system is applied. As a result the method is robust to disturbance. The performance of the proposed controller is compared with that of the conventional state feedback controller through digital computer simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.999-1003
• /
• 1992

In the paper, a hybrid control approach for the swing-up control of a rotary type inverted pendulum is treated using one-chip microcomputer. The control approach is composed by a scheduling logic control for swing up control and the linear state feedback control to achieve the disired inverted-state of the pendulum. The experimental cystem has been implemented by a 16-bit one-chip microcomputer with 3096 opu as the digital controller incorporating the above mentioned control approach.