• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.1
• /
• pp.156-161
• /
• 2014

With the proliferation of digital music, public's interest in music and desire to sing well are increasing. This paper presents the implementation of a tone correction system through a visualization of comparison between music and humming data. For this we extract MIDI note from music and humming data and then design a matching engine using DTW algorithm which is for robust matching results against local timing variation and inaccurate tempo. This system is expected to correct the user's wrong tone by visualization and feedback from the result.

• Journal of the HCI Society of Korea
• /
• v.11 no.2
• /
• pp.15-22
• /
• 2016

The ways to interact with digital appliances are becoming more diverse. Users can control appliances using a remote control and a touch-screen, and appliances can send users feedback through various ways such as sound, voice, and visual signals. However, there is little research on how to define which output method to use for providing feedback according to the user' input method. In this study, we designed an experimental study that seeks to identify how to appropriately match the output method - voice and sound - based on the user input - voice and button. We made four types of interaction with two kinds input methods and two kinds of output methods. For the four interaction types, we compared the usability, perceived satisfaction, preference and suitability. Results reveals that the output method affects the ease of use and perceived satisfaction of the input method. The voice input method with sound feedback was evaluated more satisfying than with the voice feedback. However, the keying input method with voice feedback was evaluated more satisfying than with sound feedback. The keying input method was more dependent on the output method than the voice input method. We also found that the feedback method of appliances determines the perceived appropriateness of the interaction.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.55 no.1
• /
• pp.13-20
• /
• 2006

In this paper, a control method of ozone generator for a tiny deodorizer is proposed, and also a cooling technique is described which is cooling down the flowing air gap into a silent discharger to $2[^{\circ}C]$ to generate ozone of high density and diffusing power. As the digital control system for this method, a double feedback loop is designed which detects the voltage and current of equivalent capacitor of the discharger and compensates for the poor power waveform caused by the noise at high discharging frequency. During the plant modeling of this system, computing time factor is considered as a unique parameter of the power system to improve the respond characteristics with regard to fluctuating load and to replenish the computing time delay of the controller. Through the experiment, sinusoidal input current for discharger can be acquired and all the effectiveness of this accurate control system over unstable ozone discharger are proved.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.2
• /
• pp.29-37
• /
• 2009

Recently, the structure of simulation environment is important issue in all fields. In case of the training for operating the machines which are costly such as airplanes or spaceships, simulators could be helpful for decreasing the costs and training effects by simulating real situation. When we get the driving license, too many peoples are waiting for their turns because of limited cars and testing spaces in Korea. To solve this problem, we've designed and developed the basic design for the simulators. We suggested the Computer 3D Simulation Model for practice of a drives's license. The concept of this simulator was from a 3D Racing-game which suit for driving exercise. We provide users with handle-controlled simulation setting in order that users feel reality as if they drive really through this simulator. We also use 'force-feedback' system which give handle vibration in case users collide against obstacles or exceed the line since users can absorb the simulation program and feel the sense for the real. This paper is the study about modeling the driving exercise model made use of 'computer 3D simulation', and producing and utilizing the simulator through this modeling.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.2
• /
• pp.213-219
• /
• 2002

A cone-shaped active magnetic healing spindle system for high speed internal grinding with built-in motor that has 7.5kW power and maximum rotational speed of 50,000 rpm is designed and built. Using cone-shaped AMB(Active Magnetic Bearing) system, the axial rotor dick and magnets of conventional 5-axis actuating design can be eliminated. so this concept of design provides a simple magnetic bearing system. In this paper, the cone-shaped electromagnets are designed by magnetic circuit theory, and a de-coupled direct feedback PID controller is applied to control the coupled magnetic bearings. The designed crone-shaped AMB spindle system is built and constructed with a digital control system, which has TMS320C6702 DSP, 16 bit AD/DA, switching power amplifier and gap sensors. As the AMB system provides high damping ratio eliminating overshoot and resonance speed, this spindle runs up to 40,000 rpm stably with about 5${\mu}{\textrm}{m}$ of runout.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.1 no.2
• /
• pp.9-14
• /
• 2000

State feedback with integral control for a variable air volume(VAV) unit which is recently taken notice of for the energy efficiency and saving in the building is studied to investigate the performance of the digital control methodology for the possible practical application. The digital controller which acquires the targat zone temperature and the air flow rate of the supplied air to the zone controls the opening of the damper in the VAV unit. Simulation results are performed for the conditions including reference changes and external thermal variations. In the simulation. simplified conditioned zone and the damper actuator modelling is considered. and relationships between controller gain Parameters and the system dynamics are investigated.

• Journal of Broadcast Engineering
• /
• v.21 no.2
• /
• pp.261-267
• /
• 2016

In this paper, Method for the phase distortion compensation timing offset and DC eliminator for the pilot component estimation and removal, transmitted and received signal correlation in the delay scheme DAB interference cancellation based on the same channel for using for estimating the feedback signal based on a between for removal for the timing offset compensation It proposes a repeater. This was applied to the ATSC system. The on-channel repeater of the proposed interference cancellation based on the interference removing capability is improved in interference signal is 20dB greater than the primary transmission signal environment via the return channel estimation and improve performance RFP. Accordingly, it was confirmed by simulation that good signal is sent out with the improvement of the ability of the repeater.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.12
• /
• pp.2353-2363
• /
• 1994

This paper is concerned with the design of a robust digital controller using reduced-order observer on a robotic manipulator under the disturbance. In most cases of robotic manipulator since all state vectors are not measurable, the unmeasurable state vectors must be estimated or reconstructed. Other problems are caused by the nonlinear element like as nondifferentiable Coulomb friction, disturbance due to the gravitational pull, and the torsional spring effect of a link between the drive motor and the manipulator arm. The controller is based on feeding back the observable variables and the estimated state variables which are generated by the observer, and augmenting the system by additional discrete integrators. The feedback gain parameters are obtained by first applying the optimal control theory and then readjusting the feedback parameters to eliminate the limit cycle by using describing Function for nonlinear hybrid system.

• Journal of the Korean Society of Costume
• /
• v.64 no.6
• /
• pp.120-130
• /
• 2014

The present study aimed to find out the most effective instructional method for illustration to aid the $21^{st}$-century post digital generation learners in their education. Although the literature discusses government-led enactment and revision of educational policy and curriculums and research reports by the Ministry of Education and other government agencies as well as many other research articles deal with futuristic instructional methods, the instructional methods in practice have not fully changed yet. Illustration is a means of visual communication and a subject that best represent 'expressionism' and 'speed' of the post digital generation. The present study exemplifies instructional methods to establish the need for lesson plans that best suit individuality of students and for re-training instructors. Also, the feedback process with students proved that the post digital generation learned Photoshop quickly and improved creativity via image synthesis even in short-term instructions. The present findings can be possibly used as reference data for instructional methods for illustration using digital media that best suits learners of the post digital generation. This being said, further studies should delve into specific instructional methods.

• Journal of Digital Convergence
• /
• v.6 no.1
• /
• pp.53-61
• /
• 2008

For the domestic digital contents, a proactive cooperation system or framework between the government, the businesses and research institutions, which would allow for free flow of interaction among these players, can play that role. We have proposed and realized the Dynamic Coordinating Framework(DCF) to bridge these gaps among the major players in the industry. The the Dynamic Coordinating Framework rests on the following major functions. The first major function of the DCF is to decipher any ambiguity that may be embedded in external inputs by stratified role and bias. The second function is to create cooperative groups that will deal with the ambiguities based on its consequent situation. The third is a feedback function that will draw out a new cooperative way by re-feeding the capacities and the conflicts that stem from the existing organizations and strategies into cooperation and adjustment process. Our DCF has compared and evaluated with England and Australia digital content industry models under AHP(Analytic Hierarchy Process) method. DCF has turned out to be well designed and have strong points based on OECD innovation and cooperation criteria.