• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1207-1212
• /
• 2011

This paper presents a study on the DSP(Digital Signal Processor) controller for the PBW(power-by-wire) system using BLDC(Brushless Direct Current) servo motor pump. The PBW hydraulic actuator was realized with hydraulic pump driven by BLDC servo motor, hydraulic cylinder and controller. This PBW system needs speed control of servo motor for linear thrust action of hydraulic cylinder. This paper implements a servo controller with vector control algorithm and MIN-MAX PWM technique. As CPU of a controller, TMS320F2812 DSP was adopted because it has PWM waveform generator, A/D converter, SPI(Serial Peripheral Interface) port and many input/output port etc.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.152-155
• /
• 2014

This paper describes a design of digital PWM controller for automotive brake solenoid valve which is used in ABS/ESC SoC. The PWM controller which consists of 12 channels supports both direct control and PI control. Six channels in direct control mode make consistent PWM signals according to duty ratio setting, and the others in PI control mode make PWM signals with constant current depending on current setting. The PWM controller also has functions including solenoid valve open detection, Dither and PWM phase shift. The PWM controller having 44,779 gates is fabricated using a 0.18um CMOS process, and test results show that all the functions are correct.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.8
• /
• pp.1299-1312
• /
• 2004

This paper suggests the simple form of a fuzzy PID controller and describes the design principle, tracking performance, stability analysis and changes of parameters of a suggested fuzzy PID controller. A fuzzy PID controller is derived from the design procedure of fuzzy control. It is well known that a fuzzy PID controller has a simple structure of the conventional PID controller but posses its self-tuning control capability and the gains of a fuzzy PID controller become nonlinear functions of the inputs. Nonlinear calculation during fuzzification, defuzzification and the fuzzy inference require more time in computation. To increase the applicability of a fuzzy PID controller to digital computer, a simple form of a fuzzy PID controller is introduced by the backward difference mapping and the analysis of the fuzzy input space. To guarantee the BIBO stability of a suggested fuzzy PID controller, ‘small gain theorem’ which proves the BIBO stability of a fuzzy PI and a fuzzy PD controller is used. After a detailed stability analysis using ‘small gain theorem’, from which a simple and practical method to decide the parameters of a fuzzy PID controller is derived. Through the computer simulations for the linear and nonlinear plants, the performance of a suggested fuzzy PID controller will be assured and the variation of the gains of a fuzzy PID controller will be investigated.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.5
• /
• pp.487-492
• /
• 2007

This paper presents the development of digital robust fuzzy controller for uncertain nonlinear systems. The proposed approach is based on the intelligent digital redesign(IDR) method with considering the relaxed stability condition of fuzzy control system. The term IDR in the concerned system is to convert an existing analog robust control into an equivalent digital counterpart in the sense of the state-matching. We shows that the IDR problem can be reduced to find the digital fuzzy gains minimizing the norm distance between the closed-loop states of the analog and digital robust control systems. Its constructive conditions are expressed as the linear matrix inequalities(LMIs) and thereby easily tractable by the convex optimization techniques. Based on the nonquadratic Lyapunov function, the robust stabilization conditions are given for the sampled-data fuzzy system, and hence less conservative. A numerical example, chaotic Lorentz system, is demonstrated to visualize the feasibility of the proposed methodology.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.2
• /
• pp.55-61
• /
• 2013

A field-programmable gate array (FPGA) is an integrated circuit designed to be configured by a customer or a designer after manufacturing. The FPGA configuration is generally specified using a hardware description language (HDL), similar to that used for an application-specific integrated circuit (ASIC) (circuit diagrams were previously used to specify the configuration, as they were for ASICs, but this is increasingly rare). Contemporary FPGAs have large resources of logic gates and RAM blocks to implement complex digital computations. In this paper, we implement a system of digital instrumentation using FPGA. This system consists of the trigger part, memory address controller part, control FSM part, Encoder part, LCD controller part. The hardware implement using FPGA and the verification of the operation is done in a PC simulation. The proposed hardware was mapped into Cyclone III EP2C5Q208 from Altera and used 1,700(40%) of Logic Element (LE). The implemented circuit used 24,576-bit memory element with 6-bit input signal. The result from implementing in hardware (FPGA) could operate stably in 140MHz.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.6
• /
• pp.547-553
• /
• 2006

This paper studies digital control of biodynamic model of HIV-1 via intelligent digital redesign (IDR). The purpose of the IDR is to develop an equivalent digital fuzzy controller maintaining the satisfactory performance of an existing continuous-time fuzzy controller in the sense of the state-matching. Some conditions for the stability as well as the global state-matching are provided.. They are given by the form of the linear matrix inequalities (LMIs) and thereby easily tractable by the convex optimization techniques. The main features of the proposed method are that 1) the generalized control scheme is provided for the multirate as well as the single-rate digital controllers; 2) a new compensated block-pulse function method is applied to closely match the states of the continuous-time and the sampled-data fuzzy systems in the discrete-time domain; 3) the two-step procedure of IDR is presented to prevent the performance degradation caused by the additional stability conditions. The applicability of the proposed approach is shown through the biodynamic model of HIV-1.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.306-309
• /
• 1993

Digital redesign techniques are to derive a digital controller fred the existing continuous controller and its plant so that the performance of the digitally controlled system is matched as closely as possible to that of the original continuous system at the sampling instants. Recently a new digital redesign technique, was developed to use the generalized sampled-data hold function(GSHF) based on the the grammian matrix. With this new technique the digitally redesigned system showed several good features compared with any existing technique in terms of the state match at the sampling instants, the large sampling period, and the transient reponses. This paper concerns a further improvement of the new digital redesign technique by employing the discrete grammian matrix instead of the continuous grammian matrix in defining GSHF. With this modification, it was observed by simulation that the transient response of the modified digital system shows far better performance than the digital system based on the continuous grammian matrix.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.556-557
• /
• 2014

This paper presents an artificial intelligence - Deep Belief Network (DBN) gain-scheduling adaptive PI controller scheme for dual active bridge (DAB) converter. The PI gains are allowed to vary within a predetermined range and therefore eliminate the problems faced by the conventional PI controller. The performance of the proposed controller is simulated and compared with the conventional fixed PI controller under various conditions. The experimental prototype of the DAB converter is implemented using a digital signal processor of TMS320F28335 manufactured by Texas Instrument to examine and to evaluate the performance criteria of the proposed controller. Simulation and experimental results show improvements in transient as well as steady state responses of the proposed controller over the conventional fixed PI controller.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.35-35
• /
• 2000

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.868-871
• /
• 1990

We derive an intelgral-type constraint on the complementary sensitivity function in digital control systems. Some design guidances are proposed for the pole assignment of digital controller with computation-time delay to improve the complementary sensitivity characteristics.