• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.05a
• /
• pp.25-28
• /
• 2019

Along with the development of information and communication technology, maritime communication systems also have been actively studied for navigation and communication equipment aiming at safety, efficiency, accuracy and security. However, for fishing ship over 100km far from the coast, it is difficult to manage such as location and status of ship. Therefore, in this study, for the safety of the long distance ship through Digital-HF communication system, we use method to choose the optimum frequency and it enables to check the position of ship.

• Journal of Industrial Technology
• /
• v.18
• /
• pp.431-437
• /
• 1998

In this paper, we presented a modeling of the power line channel and a new digital communication system over the channel. Firstly, we proposed a new tranceiver structure with DS-CDMA spread spectrum technique and convolutional coder and block interleaver against severe noisy power line environment. Also, QPSK modulation technique was used to get bandwidth efficiency. And then we performed a simulative evaluation of the system using MATLAB communication/simulink toolbox. According to the simulation results, the proposed system gives $10^{-6}$ BER at 20dB SNR.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.1
• /
• pp.110-132
• /
• 2019

To ensure reliable and secure communication in heterogeneous cellular network (HCN) with imperfect channel state information (CSI), we proposed a coordinated multipoint (CoMP) transmission scheme based on dual-threshold optimization, in which only base stations (BSs) with good channel conditions are selected for transmission. First, we present a candidate BSs formation policy to increase access efficiency, which provides a candidate region of serving BSs. Then, we design a CoMP networking strategy to select serving BSs from the set of candidate BSs, which degrades the influence of channel estimation errors and guarantees qualities of communication links. Finally, we analyze the performance of the proposed scheme, and present a dual-threshold optimization model to further support the performance. Numerical results are presented to verify our theoretical analysis, which draw a conclusion that the CoMP transmission scheme can ensure reliable and secure communication in dense HCNs with imperfect CSI.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.4
• /
• pp.264-271
• /
• 2011

ILS(Instrument Landing System) is the international standard system for approach and landing guidance. ILS was adopted by ICAO(International Civil Aviation Organization) in 1947 and is currently being used in commercial systems. To design the digital transmitter and receiver modules that can be mounted in the integrated ILS, we propose the digital design methods of digital double AM modulator and demodulator using FPGA chip, DDS(Direct Digital Synthesizer) for generation of sampling clock, demodulator of DDC(Digital Down Converter) structure, and spectrum analyzer using DSP chip. We demonstrate the efficiency of the proposed design method through experiments using developed transmitter and receiver modules. This system can be used as a high-performance commercial system.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.243-245
• /
• 2005

This paper presents a wired and wireless linked remote control system. Ethernet based network communication is used for long distance management and 2.4GHz RF network is adopted for the local area communication between the main network and the ballast. For the effective remote control and management including dimming using wired and wireless linked digital communication networks, control circuit of the ballast is implemented with fully digital circuit using MCU and EPLD. In this paper, the proper frame structure is proposed for the digital-remote lighting-control system and the detailed system configurations including fully digital controlled ballast for the induction lamp are described.

• Journal of Radiation Protection and Research
• /
• v.20 no.2
• /
• pp.85-95
• /
• 1995

Radiation measuring system using wireless communication method with single channel has been diveloped and tested. In this system, radiation signals from GM tube are transformed into digital pulses in pulse processing circuit and modulated in FSK (frequency shift keying) circuit for digital communication and then wirelessly transmitted to a receiving unit. The digital pulses received are then demodulated in FSK circuit and converted into radiation dose/dose rate in the data acquisition unit to display on the screen of a personal computer. The performance of this system was evaluated by using both a pulse generator and a standard radiation source(Cs-137). In both cases, digital pulses with 5V were observed in pulse processing circuit without distortion of their shape through wireless communication system. The experimental results of radiation measurement by this system after several test-irradiation of GM detector to a standard radiation source(Cs-137), showed good agreement with irradiation dose rate within 10% difference, and proved that this system could be effectively utillized as radiation measuring instrument. It is expected that this wireless radiation measuring system developed for the first time in Korea, can be used as a radiation monitor as well as a personal dosimeter if we can further improve this system to adopt wireless multichannel communication system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.45-50
• /
• 2012

In the current wireless communication technology, the digital radio system replaces the analog radio broadcasting. Since the in-band digital radio systems are used in the existing analog radio frequency band, interference problems of digital radio are caused. It is important to effectively analyze the interference. In this paper, to analyze SINR and BEP (bit error probability) of digital radio system, we propose the analysis method considering angular effect. The angular effect means a method to analyze the interference when the receiver is located in different directions around the transmitter. These results are able to give basic information for the allocation of digital radio networks.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.663-664
• /
• 2006

This paper presents a reconfigurable digital signal processing(rDSP) architecture that is effective for implementing adaptive digital signal processing in the applications of smart health care system. This rDSP architecture employs an evolution capability of FIR filters using genetic algorithm. Parallel genetic algorithm based rDSP architecture evolves FIR filters to explore optimal configuration of filter combination, associated parameters, and structure of feature space adaptively to noisy environments for an adaptive signal processing. The proposed DSP architecture is implemented using Xilinx Virtex4 FPGA device and SMIC 0.18um CMOS Technology.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.3
• /
• pp.159-168
• /
• 2010

Developments and changes in digital environment based on computer technologies and internet networks enabled us interactive communication for planning and execution through the freedom of 'connection', 'sharing', and 'conversion'. The subject of this study, interactive commercial, might be the core of success based on creation which stems from communication design, revolution in design and technology, and conversion. Communication in modern economy is not optional, but essential. Furthermore, like evolution process up to Augmented Reality from developments of mobile communication technology, or concept in paradigm change, digital interactive commercial means the core of success, not a part of it. Therefore, in order to achieve success in the global competition structure, mobile communication design, revolution, and creation which produce added value shall be working as a base. In order to reach effective communication process performance of interactive commercial media, this study would like to propose building a media commercial system which is realized by human senses. Using this, standardized methods for interactive commercial which can be used together with augmented reality based on digital technology, and for using digital robot contents are available, along with methodology system of their use. In addition, the ultimate goal of this study aims to discover new factors through reorganization of precedent analysis and adaptation based on academic achievement and practical application. And thus, it wants to contribute to practical use of interactive commercial out of augmented reality-based communication in which technology, marketing, and design are integrated to be used in real sense.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.201-208
• /
• 2001

In the 21 st century, broadcasting, communication, and computer have been integrated due to the development of digital technology. Accordingly, to overcome the limit of respective communication media and to maintain them, their independent area shall not be classified. This study is to examine the future environment of digital TV broadcasting, to analyze customizing type service and interactive type TV technology, and to make asymmetric interactive digital TV publication broadcasting system, which is TV broadcasting in the next generation to treat visual image, sound, and various data all together by harmonizing broadcasting and communication like ISDB(Integrate Service Digital Broadcasting). In addition, to develop service on publication broadcasting with high quality, this study is tn propose to develop relative devices for TV/PC reception to realize a new communication type TV publication broadcasting, by analyzing technology for producing, sending, transmitting, receiving, and saving to apply to customizing type interactive system and by examining its application.