Loading [MathJax]/jax/output/CommonHTML/jax.js
  • Title/Summary/Keyword: digital communication

Search Result 6,160, Processing Time 0.035 seconds

A 10-bit 10MS/s differential straightforward SAR ADC

  • Rikan, Behnam Samadpoor;Abbasizadeh, Hamed;Lee, Dong-Soo;Lee, Kang-Yoon
    • IEIE Transactions on Smart Processing and Computing
    • /
    • v.4 no.3
    • /
    • pp.183-188
    • /
    • 2015
  • A 10-bit 10MS/s low power consumption successive approximation register (SAR) analog-to-digital converter (ADC) using a straightforward capacitive digital-to-analog converter (DAC) is presented in this paper. In the proposed capacitive DAC, switching is always straightforward, and its value is half of the peak-to-peak voltage in each step. Also the most significant bit (MSB) is decided without any switching power consumption. The application of the straightforward switching causes lower power consumption in the structure. The input is sampled at the bottom plate of the capacitor digital-to-analog converter (CDAC) as it provides better linearity and a higher effective number of bits. The comparator applies adaptive power control, which reduces the overall power consumption. The differential prototype SAR ADC was implemented with 0.18μm complementary metal-oxide semiconductor (CMOS) technology and achieves an effective number of bits (ENOB) of 9.49 at a sampling frequency of 10MS/s. The structure consumes 0.522mW from a 1.8V supply. Signal to noise-plus-distortion ratio (SNDR) and spurious free dynamic range (SFDR) are 59.5 dB and 67.1 dB and the figure of merit (FOM) is 95 fJ/conversion-step.

Methods of DICOM and Non-DICOM Interfacing for various Radiological Equipments with PACS (방사선 검사 관련 의료장비와 PACS 간의 연동을 위한 DICOM 및 Non-DICOM 인터페이스 방안)

  • Kim, H.C.
    • Korean Journal of Digital Imaging in Medicine
    • /
    • v.6 no.1
    • /
    • pp.51-64
    • /
    • 2003
  • This thesis describes the effective interfacing methods of PACS Modality based on the system installation andoperating experiences. PACS(Picture Archiving and Communication Systems) is a system for medical image archiving and communication using large storage device and high-speed network. The standard communication protocol of PACS is DICOM(Digital Imaging and Communication in Medicine) based on TCP/IP and point-to-point protocol. However, there are many Non-DICOM Modalities and DICOM Modalities having problems. First, we had interfaced almost modalities. Fuji CR, GE CT, MRI, Angio, Fluoro, Phillips Angio, Shimadzu Fluoro. Ultrasound PACS, with the main PACS in the Seoul S Hospital as large scale hospital. And we manipulated the intelligent image distribution and the CT. MRI Interfaces never experienced beforein the Anyang J Hospital and the Chungju C Hospital as mid or small scale hospital. Technically, we developed both the DICOM Interface and the Non-DICOM Interface. At the last, the DICOM Worklist and the DICOM Print Interface were implemented in the Seoul B Hospital, the Bucheon SJ Hospital and the Seoul K Hospital independently with PACS. The Oracle, Sybase and MS-SQL are used as database, and UNIX, Macintosh, MS Windows as operating systems. And the Visual C++ and UNIX C are the main programming tools. We have used UTP, coaxial and fiber optic cable under 10/100 mbps LAN for networking.

  • PDF

Methods of DICOM and Non-DICOM Interfacing for various Radiological Equipments with PACS (방사선 검사 관련 의료장비와 PACS 간의 연동을 위한 DICOM 및 Non-DICOM 인터페이스 방안)

  • Kim, Hyeon-Cheol
    • Korean Journal of Digital Imaging in Medicine
    • /
    • v.5 no.1
    • /
    • pp.46-63
    • /
    • 2002
  • This thesis describes the effective interfacing methods of PACS Modality based on the system installation and operating experiences. PACS(Picture Archiving and Communication Systems) is a system for medical image archiving and communication using large storage device and high-speed network. The standard communication protocol of PACS is DICOM(Digital Imaging and Communication in Medicine) based on TCP/IP and point-to-point protocol. However, there are many Non-DICOM Modalities and DICOM Modalities having problems. First, we had interfaced almost modalities, Fuji CR, GE CT, MRI, Angio, Fluoro, Phillips Angio, Shimadzu Fluoro, Ultrasound PACS, with the main PACS in the Seoul S Hospital as large scale hospital. And we manipulated the intelligent image distribution and the CT, MRI Interfaces never experienced before in the Anyang J Hospital and the Chungju C Hospital as mid or small scale hospital. Technically, we developed both the DICOM Interface and the Non-DICOM Interface. At the last, the DICOM Worklist and the DICOM Print Interface were implemented in the Seoul B Hospital, the Bucheon SJ Hospital and the Seoul K Hospital independently with PACS. The Oracle, Sybase and MS-SQL are used as database, and UNIX, Macintosh, MS Windows as operating systems. And the Visual C++ and UNIX C are the main programming tools. We have used UTP, coaxial and fiber optic Gable under 10/100 mbps LAN for networking.

  • PDF

Variable Cut-off Frequency and Variable Sample Rate Small-Area Multi-Channel Digital Filter for Telemetry System (텔레메트리 시스템을 위한 가변 컷 오프 주파수 및 가변 샘플 레이트 저면적 다채널 디지털 필터 설계)

  • Kim, Ho-keun;Kim, Jong-guk;Kim, Bok-ki;Lee, Nam-sik
    • Journal of Advanced Navigation Technology
    • /
    • v.25 no.5
    • /
    • pp.363-369
    • /
    • 2021
  • In this paper, We propose variable cut-off frequency and variable sample rate small-area multi-channel digital filter for telemetry system. Proposed digital filter reduced hardware area by implementing filter banks that can variably use cut-off frequency and sample rate without additional filter banks for an arbitrary cut ratio. In addition, We propose the architecture in which sample rate can variably be selected according to the number of filters that pass through the multiplexer control. By using time division multiplexing (TDM) supported by the finite impulse response (FIR) intellectual property (IP) of Quartus, the proposed digital filter can greatly reduce digital signal processing (DSP) blocks from 80 to 1 compared without TDM. Proposed digital filter calculated order and coefficients using Kaiser window function in Matlab, and implemented using very high speed integrated circuits hardware descryption language (VHDL). After applying to the telemetry system, we confirmed that the proposed digital filter was operating through the experimental results in the test environment.

Digital Data Communication System for Mobile Network System Using CC1020 Chip (CC1020 Chip을 사용한 모바일 네트워크를 위한 디지털 데이터 통신 시스템)

  • Lim, Hyun-Jin;So, Heung-Kuk
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.8 no.1
    • /
    • pp.58-62
    • /
    • 2007
  • Digital communication is important for reliability and mobilization of the multi-channel communication systems. Transmitting and receiving data for the mobilization should be possible in anywhere and in anytime. And this system must be designed light weight small size and low power. One are essential technology for implementing the mobile wireless communication system on the age of ubiquotos. Requirements in constructing such communication field are followings. At first data transmitting and receiving should be carried out by a simple command. Second, the device should be designed as hand-hold type and low power consumption. Third, data communication should be reliable. As one of examples, car to car system which is popular in the market is introduced here, All traffic information in highway is transmitted from one car to another by using this system which can prevent possible traffic accident. This paper shows the design of a digital data communication system with CC1020 chip. This CC1020 makes easy frequency selection and easy switch from the transmit mode to the receive mode by simple setting of a memory register in the chip. The transmit power of this system is designed 10dBm and its communication range is about 100m. The power supplied this system is 3V considered as low power. The sleep mode can be easily entered during transmit mode or receive mode. We shows the program algorithm of CC1020 and interface circuit between MCU and CC1020. We shows the Photo of the CC1020 Module and Atmega128 Module.. We analysed the receiver rate with this system.

  • PDF

Design of Industrial Communication Gateway Using Additive Layer Type Communication Module (적층형 통신 모듈을 이용한 산업용 통신 게이트웨이 설계)

  • Nam, Jae-Hyun;Eum, Sang-Hee
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.23 no.12
    • /
    • pp.1673-1678
    • /
    • 2019
  • There are various networks and communication methods are used in industrial communication. Enterprises need to convert communications between industrial devices and networks for production line expansion, factory upgrades, network segmentation, and SI. This requires designers manufactured by many manufacturers to provide communication equipment for data or protocol conversion in order to connect and transmit various other mechanical devices to the network. This paper designed industrial communication gateway that can support the transformation of industrial communication protocol using multi-layered communication module. Industrial communication gateways have a structure that connects individual communication modules using RS485 communication to multiple layers. Each communication module consisted of analog and digital data card, LAN, and CAN-enabled card. The main board processor used Atmega micro-processor, and the RS485 slot was placed to have a multi-layer communication module structure. These additive layer type communication modules support analog and digital I/O functions and LAN and CAN for wide use in industrial communication control and monitoring.

A Study on the characteristics of digital-media application on surface - An analysis based upon the related characteristics of installation art - (현대건축 표면에 적용된 디지털미디어의 표현 특성 연구 - 설치미술적 특징에 기초한 분석 -)

  • Kim, Jin-Young;Lee, Hyun-Soo
    • Korean Institute of Interior Design Journal
    • /
    • v.19 no.3
    • /
    • pp.38-45
    • /
    • 2010
  • Surface has been an important issue in contemporary architecture. That originates in structural freedom of surface since the end of modern architecture and the current stream of surface becoming an identity of building. Development of digital-media has brought a great change to our society in general. Digital-media is characterized by use of digital-information and interactive communication. Digital-media has been applied on surface in contemporary architecture lately. It is a purpose of the study to analyze the characteristics of digital-media application on surface based on the related characteristics of installation art. The categories and the contents for the frame of case analysis were arranged through document research. The foreign and domestic cases of digital-media application were analyzed based on the frame of analysis. Digital-media, which is installed on surface, is interacted with human and surroundings. It enhances emotional communication between human and architecture. Surface is not any more a simple fixture but an interactive creature. It makes surface more dynamically and fluidly that the course of light and human movement affect on digital-media. Surface itself is also turned into an object of art. It reflects the interweaving characteristics between contemporary architecture and installation art. It was analyzed through the study that emotional level of people is the important issue shared in digital-media application on surface and installation art. The complementary relationship between surface of contemporary architecture and installation art can be manipulated by the application of digital-media on surface.

A Cultural Approach to the Digital transition (지상파 TV의 디지털 전환에 대한 문화적 인식과 접근)

  • Kim, Pyung-Ho
    • Korean journal of communication and information
    • /
    • v.21
    • /
    • pp.63-86
    • /
    • 2003
  • Digital TV is expected to usher in a new era of TV. Thanks to digital and network technologies, TV will no more be a dumb terminal as it is today. It will incorprate the computer and thus become an intelligent device which serves not only high quality broadcast programming, but a variety of information services much like the current networked-computer. However, the real world picture of digital TV is clearly different from such a rosy vision. Albeit too early to tell, the cases in Europe and the US attest that the digital transition suffers a setback in terms of technology, policy, business, marketing, and the users. As such, the digital transition is generally problematized in terms of policy, business model, marketing strategy, and so on. Comparatively speaking, the issues of technology, policy, business and marketing are not so complicated than that of digital TV users because of the cultural issues involved in the adoption of digital TV. In other words, the technological transition to digital TV is far easier than its cultural transition. The cultural transition demands policy makers and industries of different approaches to successfully facilitating the digital transition.

  • PDF

A Study on the Teaching and Learning Method of Digital Literacy (디지털 리터러시 함양을 위한 교수·학습 방법 연구)

  • Lee, Cheol-Seung;Baek, Hye-Jin
    • Journal of Digital Convergence
    • /
    • v.20 no.5
    • /
    • pp.351-356
    • /
    • 2022
  • The era of the 4th industrial revolution is being built on the digital revolution. In order to understand and properly utilize these technological advances, digital literacy education is emphasized. This study investigated the components of digital literacy and proposed a curriculum & teaching and learning method improvement plan, and instructor digital literacy cultivation method. In order to improve the curriculum, it is necessary to improve the curriculum by expanding the ability to solve digital problems. As a plan to improve teaching and learning methods, it is necessary to present a linkage and convergence educational model based on communication, collaboration, and sharing between instructors and learners through the establishment of an interactive platform. In order to improve the digital literacy of instructors, it is very important to improve the educational environment that can easily design a learner-centered educational model. This study is meaningful in that it presented basic data for creating an educational environment based on communication and collaboration through digital literacy in an environment connected with digital technology.

A Digital Nominative Proxy Signature Scheme for Mobile Communication (이동 통신에서 적용 가능한 수신자 지정 대리 서명 방식)

  • 박희운;이임영
    • Journal of the Korea Institute of Information Security & Cryptology
    • /
    • v.11 no.2
    • /
    • pp.27-35
    • /
    • 2001
  • Based on the development of mobile communication, the future mobile communication systems are expected to provide higher quality of multimedia services for users than today\`s systems. Therefore, many technical factors are needed in this systems. Especially the secrecy and the safety would be obtained through the introduction of the security for mobile communication. In this paper, we presents a digital nominative proxy signature scheme that processes a user\`s digital signature and encryption using the proxy-agent who has more computational power than origins in mobile communication. The proposed scheme provides non-repudiation and prevents creating illegal signature by the origin and proxy-agent in a phase of proxy signature processing. Also this scheme satisfies the confidentiality and safety in the mobile communication through a confirming signature by the right receiver.