• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.3
• /
• pp.375-382
• /
• 1986

This study was carried out to obtain the basic information for the clarification of spring growth habits mechanism of naked barleys. The isozyme patterns and activities of peroxidase in the young spike and leaf blade were analyzed during the differentiation and development of young spike. The characteristic differences between the normal and rosetted type were in c and g isozymes in young spike, and in i isozyme in the leaf blade. In the normal type, c and i isozymes disappeared at the stage of spi-kelet differentiation, g isozyme at the stage of flolet differentiation. But, in the rosetted type, those three isozymes remained in dark stained condition until the time of final sampling. Especially, those three isozymes were higher in the rosetted type than those in the normal type even at the stage of bract differentiation(BDS), just prior to the reproductive stage. The activities of peroxidase decreased slowly after BDS in the young spike and leaf blade in the normal type, While, in the rosetted type, increased linearly, and the degree of increasing was remarkable in the young spike. It was interesting that the degree of activities in young spike was higher in the rosetted type than that in the normal type even at BDS. From the above results, the remarkable differences of the isozyme patterns and activities at BDS between the normal and rosetted type were considered to be the physiological expression of the varieties concerned with the degree of spring growth habits.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.595-602
• /
• 1994

PERISTOR-3000 loaded with 32 bit DSP(Digital Signal Processor) is a technically advanced versatile dc motor controller in applications with very high requirements for rapid response, control accuracy and reliability. The current controller of PERISTOR-3000 is of the predictive type and gives fast control with both discontinuous and continuous current compared to the conventional PI current control. The speed controller gain is compensated to improve response behavior. PERISTOR-3000 communicates with its host computer, POSTAR-3200, or any IBM or compatible PC and can be controlled. Dedicated monitoring system for MMI is introduced.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1697-1698
• /
• 2008

PLS(Pohang Light Source) is 2.5 Gev synchrotron radiation source in Pohang, Korea, which is under operation since 1995. The hardware and software of the old BPM(Beam Position Monitor) data acquisition system for the PLS storage ring was completely upgraded to increase its performance and stability. The new BPM data acquisition system is based on VME-based EPICS (Experimental Physics and Instrument Control System) IOC system. We used 16-bit resolution analog-to-digital conversion board to digitize analog BPM signals. We developed a data average software to average raw BPM data using reflective memory board. We also developed device drivers for VME I/O boards used, IOC database for PV's(Process Variables). The new BPM data acquisition system is currently running for routine operation with good performance and stability. In this paper, we present the hardware and software of the new BPM data acquisition system DTL water skid cooling system and Resonant Control Cooling.

• Journal of the Korean Society for information Management
• /
• v.31 no.2
• /
• pp.189-209
• /
• 2014

This study examined librarians' perceptions of Information Commons(I.C.), user's information seeking behaviors, and new role of library in the digital ages. Interviews with 28 librarians found that the perceptions of the librarians were widely differed depending on their understandings of the nature of the space. The interview results were divided into three different categories of librarians: the librarians; 1) understanding library as a place only with academic functions, 2) library as academic place along with multi-cultural functions, and 3) library as open learning space with focus on creativity and discovery of users. The findings also indicated that all these perceptions are closely related to understanding of the role of library and its future development.

• Journal of Biosystems Engineering
• /
• v.13 no.2
• /
• pp.28-37
• /
• 1988

This study was conducted to construct the soil bin system and associated microcomputer-based data acquisition system which is to be used for the effective evaluation of wheel performance. The soil bin system consists of four main parts; soil bin, carriage drive system, test carriage and soil processing carriage. The test carriage was constructed to measure the five performance parameters of testing wheels; pulling forte, motion resistance, sinkage and rotational speed of test wheel, and speed of test carriage. The test wheel is powered by a hydraulic system up to 8 ps. Soil processing carriage was designed to provide uniform test soil condition across the toil bin, and reproduction of soil conditions found satisfiable. The data acquisition system consists of APPLE II PLUS microcomputer, strain amplifier, I/O interface, A/D converter, digital counter and various transducers. It takes about 0.86 seconds to measure a set of performance parameters and store on the floppy disk simultaneously. Series of experiment showed that this system can be used effectively for evaluating the wheel performance associated with soil.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.10
• /
• pp.1061-1070
• /
• 2002

In this paper, we present a performance analysis of the smart antenna test-bed operating in a IS2000 1x through a test-bed that has been implemented on a DSP(TMS320C6711) board. The test-bed consists of a PC (for generating the RX data), beam-former(i.e., a stand-alone PCB for weight computation), and an interfacing module. The performance improvements compared to a normal base station system consisting of a single antenna are shown in terms the BER(bit error rate) in the wide-band CDMA channel.

• ETRI Journal
• /
• v.31 no.6
• /
• pp.770-777
• /
• 2009

We have developed a fully functional reconfigurable optical add-drop multiplexer (ROADM) switch module using a polymer integrated photonic lightwave circuit technology. The polymer variable optical attenuator (VOA) array and digital optical switch array are integrated into one polymer PLC chip and packaged to form a 10-channel VOA integrated optical switch module. Four of these optical switch modules are used in the ROADM switch module to execute 40-channel switching and power equalization. As a wavelength division multiplexer (WDM) filter device, two C-band 40-channel athermal arrayed waveguide grating WDMs are used in the ROADM module. Optical power monitoring of each channel is carried out using a 5% tap PD. A controller and firmware having the functions of a 40-channel switch and VOA control, optical power monitoring, as well as TEC temperature control, and data communication interfaces are also developed in this study.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4C
• /
• pp.377-385
• /
• 2010

In this paper, a general and explicit technique is presented for determining the filter coefficients of maximally flat (MAXFLAT) FIR filter with the magnitude response exactly passing through a prescribed cutoff point. This technique is based on a general formula (i.e. impulse response) with an arbitrary cutoff point and permits direct computation of the coefficients of this filter type with a specified cutoff point. The technique provides an explicit method for choosing the order of flatness of the filter with the specified cutoff point. Also, in the paper, it is shown to give a computationally efficient and accurate solution to the design of the filters with the desired cutoff point.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3249-3252
• /
• 1999

In this paper, we present the Tele-PACS of radiology, which uses the communication network as asymetric satellite data communication system. The asymetric satellite data communication system uses receive-only satellite links for data delivery and PSTN(Public Switched Telephone Network) modem or N-ISDN(Integrate Services Digital Network) for communication. The satellite communication linking shows the very high-speed performance than terrestial linking such as 28.8 kbps modem linking and 56Kbps linking. The satellite linking is 5 - 10 times faster than the 56Kbps linking. We conclude that 1) Satellite networking is currently the cheapest and fastest solution for internet access. 2) Web-based Image-Viewer enables small size hospitals in rural area to connect to central PACS easily and to retrieve the image data reliably. 3) The suggested teleradiology system using satellite networking could be adequate to fast telemedicine and telecare for rural hospitals especially located in geographically isolated areas such as islands.

• Journal of the Korea Society for Simulation
• /
• v.19 no.1
• /
• pp.41-51
• /
• 2010

A control system has been being developed by korean engineers for 500MW korean standard type fossil power plant with the advent of retrofit of old control system. Simulators have been used for digital I&C system pre-tests and validation tests in nuclear power plants. In this paper, the power plant simulator for control system V&V was developed in order to verify the developed control system prior to application to a power plant. The control models were developed using plant control system data, translator programs, and vendor manuals. The developed simulator was verified by steady-state test, load swing test, transient test and so on.