• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.754-760
• /
• 2013

We investigated an electrochemical properties for Langmuir-Blodgett (LB) monolayer films of sphingomyelin(SP) and polyamic acid(PAA) mixture(1:1, 2:1 and 3:1 molar ratio). LB monolayer films of mixture was deposited by the LB method on the indium tin oxide(ITO) glass. The electrochemical properties measured by cyclic voltammetry with three-electrode system in 0.1N $KClO_4$ solution. As a result, LB monolayer films of SP and PAA mixture was appeared on irreversible process caused by the reduction current from the cyclic voltammogram. Diffusion coefficient(D) in the SP and PAA mixture was calculated $2.670{\times}10^{-5}$, $3.562{\times}10^{-5}$ and $1.005{\times}10^{-5}cm^2s^{-1}$ at 1:1, 2:1 and 3:1 molar ratio, respectively.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.3
• /
• pp.39-45
• /
• 2016

In this paper, prcess modeling of germanium condensation has been performed and a germanium PMOSFET having nanowire channel implented by the condensation process has been designed and characterized by device simulations. Based on the previous experimental results, our modeling results demonstrate that the ratio of germanium concentration at the silicon germanium-silicon dioxide interface ($C_S$) to that in the bulk region ($C_B$) which are obtainable during the germanium condensation is approximately 4.03 and the effective diffusion coefficient ($D_{eff}$) of germanium atom is $3.16nm^2/s$. Furthermore, a germanium nanowire-channel PMOSFET having the ultra-thin germanium channel on the silicon core that can be fabricated by the germanium condensation has been designed and characterized. As the result, it is confirmed that the proposed device having the coaxial nanowire consisting of silicon core and germanium channel might have superior performances over the device with either all-silicon or all-germanium channel.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.1
• /
• pp.64-70
• /
• 2013

We investigated an electrochemical properties for Langmuir-Blodgett (LB) monolayer films of sphingomyelin and polyamic acid(1:1 molar ratio) mixture. LB monolayer films of mixture was deposited by the LB method on the indium tin oxide(ITO) glass. The electrochemical properties measured by cyclic voltammetry with three-electrode system in $KClO_4$ solution. The current of reduction and oxidation range was measured from 1650 mV to -1350 mV, continuously. The scan rates were 50, 100, 150, 200 and 250 mV/s, respectively. As a result, LB monolayer films of sphingomyelin and polyamic acid mixture was appeared on irreversible process caused by the reduction current from the cyclic voltammogram. Diffusion coefficient (D) in the sphingomyelin and polyamic acid mixture was calculated $2.67cm^2s^{-1}{\times}10^5$, $5.23cm^2s^{-1}{\times}10^6$ at 0.1 N and 0.2 N $KClO_4$ solutions, respectively.

• Korean Journal of Food Science and Technology
• /
• v.12 no.4
• /
• pp.285-291
• /
• 1980

The hydration and cooking rate of two rice varieties, Akibare (Japonica) and Milyang 23 (Indica), were investigated in terms of mathematical rate equations. The hydration rate at temperatures of $10{\sim}40^{\circ}C$ was examined by weighing method. The absorption of liquid water by rice grain was directly proportional to the square root of the hydration time. The diffusion coefficient was given by the Arrhenius relation : $D=3.151{\times}10^{-3}\exp\;(-4000/RT)$ for Akibare and $D=5.853{\times}10^{-3}\exp\;(-5700/RT)$ for Milyang 23. Milyang 23 was cooked at a faster rate than Akibare. The activation energies for cooking were in the range of 18 000 cal/mole at $90{\sim}100^{\circ}C$ and 9,000cal/mole at $100{\sim}120^{\circ}C$. However, Milyang 23 showed slightly higher activation energy of cooking at $90{\sim}100^{\circ}C$. Adhesiveness and amylograph viscosities at all reference points for Milyang 23 were higher than those for Akibare.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.1
• /
• pp.36-41
• /
• 2018

This paper presents an implementation of a millimeter-wave(W band) multiflare-angle horn antenna. The proposed antenna is a multimode dual-polarized square horn having equal E- and H-plane beamwidths and consists of a multimode generating section, a four-square-waveguide exciter, orthomode transducers, and power combiners for the sum pattern formation. The antenna structure has been designed to allow for easy fabrication and the designed antenna has been fabricated to a precision of ${\pm}0.02mm$ by layer-by-layer machining and diffusion bonding. The input reflection coefficient and the radiation pattern of the fabricated antenna have been measured using a network analyzer and a far-field test facility. Measurements show that the proposed antenna has 17.7~18.3 dBi gain, $25.2{\sim}28.5^{\circ}$ beamwidth, and an input VSWR between 1.02~1.75, within ${\pm}0.5GHz$ from the center frequency.

• Journal of Korea Technology Innovation Society
• /
• v.10 no.3
• /
• pp.383-405
• /
• 2007

In this paper we estimate knowledge production function for 15 South Korean industry sectors using panel data. To accommodate the influence of inter-sectoral interactions on the creation of knowledge, we estimate parameters for related knowledge production functions using the Dynamic Seemingly Unrelated Regression(DSUR) model proposed by Mark et al. (2005). We find the elasticity of knowledge production with respect to the size of research staff to be 0.25 and that with respect to the existing stock of knowledge to be 0.35. The fact that the elasticity of new knowledge creation with regard to the existing knowledge stock is below 1 in South Korea corroborates the view that the rate of long-term growth of her economy is chiefly determined by the elasticity related to production functions of goods and services and the rate of population growth, and that her government policy, to ensure a continued growth for the Korean economy, must shift the focus of R&D policies from the current direct intervention-centered model to one consisting of indirect measures, namely supporting knowledge management and diffusion and the creation of a knowledge sharing system. In terms of R&D policy implications it could be consider that the national knowledge production system should strengthen the cumulative process of knowledge accumulation and population for research and development. Our country R&D policy, also, need to adopt a global approach to increase knowledge stock at the highest levels of a country.

• Tuberculosis and Respiratory Diseases
• /
• v.59 no.4
• /
• pp.374-379
• /
• 2005

Background : The single-breath carbon monoxide diffusion capacity (DLCO) and the per unit alveolar volume (KCO; $D_LCO/VA$) gave discordant values when there was an abnormal alveolar volume (VA). However, the clinical significance of the discordant values in patients with airflow limitation has not been examined. This study investigated the $D_LCO$ and KCO changes after improving the airflow limitation. Methods : The baseline $D_LCO$ and KCO with lung volume were measured in patients with an airflow obstruction. The effective alveolar volume was measured using the single-breath $CH_4$ dilution method. The patients divided into two groups according to the baseline values: (1) increased KCO in comparison with the $D_LCO$ (high discordance) (2) decreased or not increased KCO in comparison with the $D_LCO$ (low discordance). The diffusion capacity and lung volume were measured after treatment. Results : There was no significant difference in the baseline lung volumes including the $FEV_1$ and FVC between the two groups. The $FEV_1$ and FVC were significantly increased in the high discordance group compared with the low discordance group after treating the airflow limitation. The $D_LCO$ and alveolar volume were significant higher in the high discordance group compared with the low discordance group while the TLC was not. Conclusion : The discordance between the $D_LCO$ and KCO could be translated into an airflow reversibility in patients with an airflow limitation.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.1077-1080
• /
• 2008

Material parameters such as surface chloride content, water permeability coefficient, chloride diffusivity and critical chloride content are a substantial key parameter for understanding the durability performance of concrete and its micro-structural densification. Over the past few decades, a considerable number of studies on the durability design for marine concrete structures have been carried out. However, the results are different to each other. In order to establish a consistent durability design system of concrete, it is a precondition to define material parameters, which affect deterioration of concrete due to chloride penetration. Such parameters are surface chloride content, chloride diffusivity, and critical chloride content. Usually these parameters are assumed as temporary constant values or obtained from the experimental results for short term. However, it is necessary to define these parameters reasonably, because these significantly influence the calculation of service life of concrete. In this paper, it is introduced to define material parameters of concrete for chloride diffusion, such as surface chloride content $[Cl]_s$, water permeability coefficient K, chloride diffusivity $D_{Cl}$, critical chloride content $[Cl]_{cr}$. These are expressed as time function considering hydration evolution of hardened cement paste. The definition of the material parameters is a prerequisite to simulate chloride penetration into concrete as time elapsed.

• Journal of Soil and Groundwater Environment
• /
• v.26 no.5
• /
• pp.20-28
• /
• 2021

Perfluorinated compounds(PFCs), an emerging environmental pollutant, are environmentally persistent and bioaccumulative organic compounds that possess a toxic impact on human health and ecosystems. PFCs are distributed widely in environment media including groundwater, surface water, soil and sediment. PFCs in contaminated solid can potentially leach into groundwater. Therefore, understanding PFCs partitioning between the aqueous phase and solid phase is important for the determination of their fate and transport in the environment. In this study, the sorption equilibrium batch and kinetic experiment of PFCs were carried out to estimated the sorption coefficient(K_d) and the fraction between aqueous-solid phase partition, respectively. Sorption branches of the PFDA(Perfluoro-n-decanoic acid), PFNA(Perfluoro-n-nonanoic acid), PFOA(Perfluoro-n-octanoic acid), PFOS(Perfluoro-1-octane sulfonic acid) and PFHxS(Perfluoro-1-hexane sulfonic acid) isotherms were nearly linear, and the estimated K_d was as follow: PFDA(1.50) > PFOS(1.49) > PFNA(0.81) > PFHxS(0.45) > PFOA(0.39). The sorption kinetics of PFDA, PFNA, PFOA, PFOS and PFHxS onto soil were described by a biexponential adsorption model, suggesting that a fast transport into the surface layer of soil, followed by two-step diffusion transport into the internal water and/or organic matter of soil. Shorter times(<20hr) were required to achieve equilibrium and fraction for adsorption on solid(F₁, F₂) increased with perfluorinated carbon chain length and sulfonate compounds in this study. Overall, our results suggested that not only the perfluorocarbon chain length, but also the terminal functional groups are important contributors to electrostatic and hydrophobic interactions between PFCs and soils, and organic matter in soils significantly affects adsorption maximum capacity than kinetic rate.

• Korean Journal of Clinical Laboratory Science
• /
• v.53 no.1
• /
• pp.19-31
• /
• 2021

This study aimed at comparing the performance of imported LX detergent cleaning solution (LX-CS) and the self-manufactured OC cleaning solution (OC-CS), based on functional and quantitative analysis. The functional analysis was carried out using apparent diffusion coefficient (ADC) values. For quantitative analysis, precision, linearity, and carry-over rates were measured with commercial control materials according to the Clinical and Laboratory Standards Institute (CLSI) guidelines. Using OC-Sensor PLEDIA (Eiken Chemical, Japan), the ADC value of all cuvettes satisfied the acceptance criteria. For quantitative analysis, precision was less than 5.0% for the two products, and carry-over rates were less than ±1.00%. The linearity slopes and r2 values were 1.0017 and 0.9982 in the LX-CS, and 0.9924 and 0.9996 in the OC-CS, respectively. The correlation coefficient (r) was found to be 0.9997. Also, the percent difference in correlation with 40 artificial-stool specimens was less than 10% and the p-value was less than 0.1. The result of standard deviation ratio (D: ±1 SD ratio) was similar for both products. In conclusion, the functional and quantitative analyses of the two products were compared and showed similar results. In the future, the self-manufactured OC-CS will be able to provide a much more stable and faster supply than the imported LX-CS.