• ETRI Journal
• /
• v.42 no.6
• /
• pp.827-836
• /
• 2020

Measuring the diffraction loss for high frequencies, long distances, and large diffraction angles is difficult because of the high path loss. Securing a well-controlled environment to avoid reflected waves also makes long-range diffraction measurements challenging. Thus, the prediction of diffraction loss at millimeter-wave frequency bands relies on theoretical models, such as the knife-edge diffraction (KED) and geometrical theory of diffraction (GTD) models; however, these models produce different diffraction losses even under the same environment. Our observations revealed that the KED model underestimated the diffraction loss in a large Fresnel-Kirchhoff diffraction parameter environment. We collected power-delay profiles when millimeter waves propagated over a building rooftop at millimeter-wave frequency bands and calculated the diffraction losses from the measurements while eliminating the multipath effects. Comparisons between the measurements and the KED and GTD diffraction-loss models are shown. Based on the measurements, an approximation model is also proposed that provides a simple method for calculating the diffraction loss using geometrical parameters.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.9
• /
• pp.757-763
• /
• 2013

This study discusses the multiple knife-edge diffraction loss with the receiver and jammer located in the Seoul metropolitan northwestern region. The considered positioning and jamming signals are the GPS L1 C/A signal and several jamming signals such as the wideband Gaussian noise, matched spectrum, and continuous wave signals. To calculate the accurate diffraction effects, the 3-dimensional topography data at the Seoul metropolitan northwestern region was used.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.718-723
• /
• 2004

The insertion loss of a noise barrier comes from the effects of diffraction, transmission loss, absorption coefficient and attenuation by direct propagation. The noise level after the noise barrier, differs reatly from the diffraction on the upper part of the barrier. Maekawa, furze and Anderson presented a empirical formula for calculating the diffraction of a semi infinte screen shaped noise barrier. In this syudy, Noise reduction performance software was developed for the proper design and assessment of new plastic barrier . Predicted sound pressure level from using the software is compared with the site-measurement results to verify the noise reduction performance and feasibility of prediction software for insertion loss of noise barrier.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.5
• /
• pp.204-210
• /
• 2005

Alternating current (AC) losses of two Bi-2223 ([Bi, Pb]: Sr: Ca: Cu: O = 2:2:2:3) tapes [(Tape I, un-twist-pitch) and the other with a twist-pitch of 10 mm (Tape II)] were measured and compared. These samples, produced by the powder-in-(Ag) tube (PIT) method, are multi-filamentary. Also, it's produced by non-twist and different twist pitch (8, 10, 13, 30, 50 and 70 mm). The critical current measurement was carried out under the environment in liquid Nitrogen and in zero-field by 4-probe method. Susceptibility measurements were conducted while cooling in a magnetic field. Flux loss measurements were conducted as a function of ramping rate, frequency and field direction. The AC flux loss increases as the twist-pitch of the tapes decreased, in agreement with the Norris Equation. Neutron-diffraction measurements have been carried out investigate the crystal structure, magnetic structures, and magnetic phase transitions in Bi-2223([Bi, Pb]:Sr:Ca:Cu:O)

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.3
• /
• pp.264-269
• /
• 2013

This paper is to investigate propagation path characteristics of GPS potential jamming signal. To do this, the spherical ground diffraction model is applied to the potential jamming scenario referred to the GPS jamming events occurred in recent years. The fundamental theory on the propagation path loss is discussed and a specific model is applied to several vehicles types which have own heights of antennas in order to compare their propagation path loss values at same 2-D location. The transmitting powers are appropriately given as the ordinary GPS jamming events. And then the received powers in dBW are obtained with given transmitting powers and the estimated total loss. The result of received jamming power at various locations due to the given scenario was distinct. For example, propagation loss values were estimated as -147 ~ -142dBW and -167 ~ -162dBW in $10^6W$ and $10^4W$, respectively. This computation result of the loss can be seriously considered with the tolerable jammer power against L1- C/A GPS receiver under any real jamming situations.

• Journal of Environmental Health Sciences
• /
• v.24 no.2
• /
• pp.145-150
• /
• 1998

This study was carried out to investigate the loss amount of collection at the different of precipitatation time, high voltage and gas speed. This work has focused on the dependence of the collection efficiency in the collector zone with gas speed and high voltage. This advanced Model is developed by research of the different parameter as the conventionnal modem of study. In order to investigate collection efficiency of electrostatic precipitator, the loss amount of knocking was measured with Monitek-Treubung and the particle size was analyzed by He-Ne laser diffraction spectroscopy.

• Korean Journal of Optics and Photonics
• /
• v.13 no.1
• /
• pp.21-26
• /
• 2002

In the conventional star coupler, a certain amount of loss should be expected because lateral diffraction is used for the power distribution. In this paper, we propose a new design of a low loss star coupler which employs UV-written tapered waveguides and an AWG based on the low loss star couplers, and investigate their various characteristics. The loss of the UV-written star coupler is lower than that of the conventional star coupler, and the AWG device based on the UV-written star couplers shows low loss characteristics.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.373-376
• /
• 2004

The measurement of diffraction of LCOS microdisplay with various pixel size, interpixel gap, pixel height and coatings demonstrates that pixel size is the leading factor for diffraction loss, while the role of varying pixel gap is less significant comparatively. One-dimensional diffraction simulation is found to be in good agreement with the measurement. Noticeable deviation occurs when pixel size is as small as 8um.

• Journal of KSNVE
• /
• v.10 no.1
• /
• pp.49-56
• /
• 2000

In this paper performance of the noise barrier which is 53 m long and 6m high, and is located between the high rise apartment and road, is studied by using experimental and analytic method. The insertion loss is measured by using the direct method in accordance with the ISO code, while theoretical prediction is based on Muradali and Fyfe's method (Applied Acoustics, Vol. 53, 49~75, 1998). In addition to the diffraction at the top of the barrier, the waves are reflected infinite times between the building and the barrier, which is equivalent to replacing the building by the infinite series of the image receiver points. In two-dimensional study, the prediction of the insertion loss results in significantly overestimated values compared with the measurement. However three-dimensional analysis shows reasonable agreements, where traffic noise is assumed as incoherent line source and the length of the source is larger than that of the barrier.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.3
• /
• pp.289-296
• /
• 1997

In this paper, several diffraction formulas are discussed and diffraction losses predicted from each formula for a wedge are compared with each other. Simulation results are also compared with measured ones. It turns out that in real situations, where many scatterers are located around a diffracting wedge, the prediction from the simple knife-edge formula for vertical polarization agrees well with the measured loss.