• 센서학회지
• /
• 제11권3호
• /
• pp.171-182
• /
• 2002

이식형 인공중이에 사용되는 일반적인 전자기 방식의 진동 트랜스듀서에 비하여 두 개의 소형 영구자석을 같은 극끼리 접착한 후 코일내부에 위치시킨 차동 전자 트랜스듀서는 효율이 높고 코일-영구자석간의 공극조정이 필요 없으며 외부의 자기장에 대하여 영향을 받지 않는 특성을 가진다. 본 논문에서는 이러한 차동 전자 트랜스듀서를 이식형 인공중이 시스템에 사용하기 위하여 입력전류에 대하여 진동력의 크기를 최대화시킬 수 있는 효율적인 구조를 제안, 해석하였다. 유한요소 해석을 통하여 가장 효율적인 코일과 자석의 길이 비를 도출하였고 소리신호 전달을 위한 트랜스듀서의 필요 진동력을 산출한 후 트랜스듀서 발생 진동력을 해석하였다. 그리고 실제 이소골에 이식할 수 있는 크기의 트랜스듀서를 제작하기 위한 설계상수를 추출하였다. 계산된 설계상수를 이용하여 이식 가능한 크기로 트랜스듀서를 구현한 후 무부하 실험과 사체 부하 실험을 실시하여 제작된 트랜스듀서가 실제 중등이상 고도난청자를 위한 이식형 인공중이 시스템에 사용될 수 있음을 증명하였다.

• 제어로봇시스템학회논문지
• /
• 제20권5호
• /
• pp.570-577
• /
• 2014

This paper describes the design of a force applying system for a smart phone curved glass molding system and its characteristic test. The force applying system is composed of a motor and gear, a rectilinear movement structure, a force sensor, an LVDT (Linear Variable Differential Transformer) sensor, an up and down moving block, and so on. The system precisely controls the applying force and time to the plane glass because the glass can be easily destroyed under applied force, and can be bent imperfectly. As a result of the characteristic test, the curved glass can be manufactured using this system, and the holding time under 0N force, the applying force to the plane glass, the time for applying from 0N to maximum force, and the holding time under maximum force at the manufacture feasible temperature $620^{\circ}C$ were found.

• 센서학회지
• /
• 제13권6호
• /
• pp.430-435
• /
• 2004

The resolution of the accelerometer, fabricated with MEMS technology is mainly affected by mechanical and electrical noise. To reduce mechanical noise, we have to increase mass of the structure part and quality factor related with the degree of vacuum packaging. On the other hand, to increase mass of the structure part, the thickness of the structure must be increased and ICP-RIE is used to fabricate the high aspect ratio structure. At this time, footing effect make the sensitivity of the accelerometer decreasing. This paper presents a hybrid SOG(Silicon On Glass) Process to fabricate a lateral silicon accelerometer with differential capacitance sensing scheme which has been designed and simulated. Using hybrid SOG Process, we could make it a real to increase the structural thickness and to prevent the footing effect by deposition of metal layer at the bottom of the structure. Moreover, we bonded glass wafer to structure wafer anodically, so we could realize the vacuum packaging at wafer level. Through this way, we could have an idea of controlling of quality factor.

• 한국정밀공학회지
• /
• 제31권4호
• /
• pp.335-342
• /
• 2014

This paper describes the forming conditions of smart-phone curved glass using the glass molding system with force applying system. The force applying system is composed of a body, a motor and gear, a rectilinear movement structure, a force sensor, a LVDT sensor (Linear Variable Differential Transformer), a up and down moving block, and so on. The glass molding system for characteristic test to find the forming conditions consists of the force applying system and a chamber, a metallic mold, a upper heater, a lower heater and so on. The characteristic test for forming conditions of smart-phone curved glass was carried out at forming temperature $620^{\circ}C$ and $650^{\circ}C$ using the glass molding system. As a result of the characteristic test, the forming conditions of curved glass could be found, and it is thought that the conditions can be used to apply to the system for producing in large quantities.

• Structural Engineering and Mechanics
• /
• 제20권2호
• /
• pp.191-207
• /
• 2005

Time delay exists inevitably in active control, which may not only degrade the system performance but also render instability to the dynamic system. In this paper, a novel active controller is developed to solve the time delay problem in flexible structures. By using the independent modal space control method, the differential equation of the controlled mode with time delay is obtained from the time-delay system dynamics. Then it is discretized and changed into a first-order difference equation without any explicit time delay by augmenting the state variables. The modal controller is derived based on the augmented system using the discrete variable structure control method. The switching surface is determined by minimizing a discrete quadratic performance index. The modal coordinate is extracted from sensor measurements and the actuator control force is converted from the modal one. Since the time delay is explicitly included throughout the entire controller design without any approximation, the system performance and stability are guaranteed. Numerical simulations show that the proposed controller is feasible and effective in active vibration control of dynamic systems with time delay. If the time delay is not explicitly included in the controller design, instability may occur.

• 전자공학회논문지
• /
• 제53권11호
• /
• pp.48-55
• /
• 2016

노트북, 테블릿 PC 및 스마트폰 등의 휴대 기기를 위한 디스플레이의 전력소모를 낮추기 위해, 주변 밝기에 따라서 디스플레이의 밝기를 조정할 수 있는 광 센서 시스템을 연구하였다. 또한, 휴대 기기의 복잡도와 비용에 크게 영향을 주지 않도록, 광 센서 시스템을 디스플레이 패널에 일체형으로 구현하고자 했으며, 이를 위해서 저온 다결정 실리콘 박막트렌지스터를 이용하여 패널에 광 센서와 신호취득 회로를 집적하고자 했다. 주변 밝기를 감지하는 광 센서의 패널 간 편차를 별도의 공정 설비없이 신뢰성 있게 보정할 수 있도록, 새로운 보정 방식을 제안하였다. 이와 더불어 최종 데이터를 디지털화하기 위한 아날로그-디지털 변환기를 포함한 신호취득 회로를 제안하고 검증하였다. 제안하는 회로는 집적하기에 적합하도록 간단한 구동 신호로 동작되며, 인식 가능한 입력 밝기는 10에서 10,000 lux까지이다. 제안하는 신호취득 회로의 신호취득 주파수는 100Hz이며, 20개의 출력 레벨에 대한 최대 차등 불균일 오차는 0.5 LSB 이하이다.

• Journal of the Korean Physical Society
• /
• 제73권10호
• /
• pp.1437-1443
• /
• 2018

In this work, $SnO_2$ modified with reduced graphene oxide (rGO) and carbon nanotubes (CNTs) separately and combined sensitized by using the co-precipitation method and their sensing behavior toward ethanol vapor at room temperature were investigated. An interdigitated electrode (IDE) gold substrate is very expensive compared to a fluorine doped tin oxide (FTO) substrate; hence, we used the latter to reduce the fabrication cost. The structure and the morphology of the studied materials were characterized by using differential thermal analyses (DTA) and thermogravimetric analysis (TGA), transmission electron microscope (TEM), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, Brunauer-Emmett-Teller surface area and Barrett-Joyner-Halenda (BJH) pore size measurements. The studied composites were subjected to ethanol in its gas phase at concentrations from 10 to 200 ppm. The present composites showed high-performance sensitivity for many reasons: the incorporation of $SnO_2$ and CNTs which prevents the agglomeration of rGO sheets, the formation of a 3D mesopourus structure and an increase in the surface area. The decoration with rGO and CNTs led to more active sites, such as vacancies, which increased the adsorption of ethanol gas. In addition, the mesopore structure and the nano size of the $SnO_2$ particles allowed an efficient diffusion of gases to the active sites. Based on these results, the present composites should be considered as efficient and low-cost sensors for alcohol.

• Structural Engineering and Mechanics
• /
• 제58권5호
• /
• pp.931-947
• /
• 2016

The effects of nanotechnology and smartness on the buckling reduction of pipes are the main contributions of present work. For this ends, the pipe is simulated with classical piezoelectric polymeric cylindrical shell reinforced by armchair double walled boron nitride nanotubes (DWBNNTs), The structure is subjected to combined electro-thermo-mechanical loads. The surrounding elastic foundation is modeled with a novel model namely as orthotropic nonhomogeneous Pasternak medium. Using representative volume element (RVE) based on micromechanical modeling, mechanical, electrical and thermal characteristics of the equivalent composite are determined. Employing nonlinear strains-displacements and stress-strain relations as well as the charge equation for coupling of electrical and mechanical fields, the governing equations are derived based on Hamilton's principal. Based on differential quadrature method (DQM), the buckling load of pipe is calculated. The influences of electrical and thermal loads, geometrical parameters of shell, elastic foundation, orientation angle and volume percent of DWBNNTs in polymer are investigated on the buckling of pipe. Results showed that the generated ${\Phi}$ improved sensor and actuator applications in several process industries, because it increases the stability of structure. Furthermore, using nanotechnology in reinforcing the pipe, the buckling load of structure increases.

• Steel and Composite Structures
• /
• 제33권6호
• /
• pp.891-906
• /
• 2019

This study considers the instability behavior of sandwich plates considering magnetorheological (MR) fluid core and piezoelectric reinforced facesheets. As facesheets at the top and bottom of structure have piezoelectric properties they are subjected to 3D electric field therefore they can be used as actuator and sensor, respectively and in order to control the vibration responses and loss factor of the structure a proportional-derivative (PD) controller is applied. Furthermore, Halpin-Tsai model is used to determine the material properties of facesheets which are reinforced by graphene platelets (GPLs). Moreover, because the core has magnetic property, it is exposed to magnetic field. In addition, Kelvin-Voigt theory is applied to calculate the structural damping of the piezoelectric layers. In order to consider environmental forces applied to structure, the visco-Pasternak model is assumed. In order to consider the mechanical behavior of structure, sinusoidal shear deformation theory (SSDT) is assumed and Hamilton's principle according to piezoelasticity theory is employed to calculate motion equations and these equations are solved based on differential cubature method (DCM) to obtain the vibration and modal loss factor of the structure subsequently. The effect of different factors such as GPLs distribution, dimensions of structure, electro-magnetic field, damping of structure, viscoelastic environment and boundary conditions of the structure on the vibration and loss factor of the system are considered. In order to indicate the accuracy of the obtained results, the results are validated with other published work. It is concluded from results that exposing magnetic field to the MR fluid core has positive effect on the behavior of the system.

• 대한조선학회논문집
• /
• 제57권4호
• /
• pp.198-206
• /
• 2020

In this study, the dynamic structural behavior of pressure vessels due to pressure pulse initiated by implosion of neighbouring airbacked equipments including Unmanned Underwater Vehicles (UUV), sensor system, and so on were dealt with for the structural design and safety assessment of pressure hulls of submarine. The dynamic buckling and collapse responses of pressure vessel in deep sea were investigated considering the effects of initial hydrostatic pressure and fluid-structure interactions. The governing equations for circular cylindrical shells were formulated theoretically assuming a relatively simple displacement fields and the derived nonlinear simultaneous ordinary differential equations were analysed by developed numerical solution algorithm. Finally, the introduced safety assessment procedures for the dynamic buckling behaviors of pressure hulls due to implosion pressure pulse were validated by comparing the theoretical analysis results with those of experiments for examples of simple cylinders.