• 전기학회논문지
• /
• 제67권10호
• /
• pp.1395-1400
• /
• 2018

EO TGP(Electro-Optical Targeting Pod) is an optical tracking system which has various functions such as target tracking and image stabilization and LOS(Line of Sight) change. Especially, it is very important to move the LOS into a interest point for joystick command. When pilot move joystick in order to observe different scene, EO TGP gimbals should be operated properly. Generally, most EOTS just operate corresponding gimbal for joystick command. For example, if pilot input horizontal command in order to observe right hand screen, it just drive azimuth gimbal at any position. But in the screen, the image dosen't move in a horizontal direction because gimbal structure is Euler angle. And image rotation is occurred by elevation gimbal angle. So we need to move Pitch gimbal. So in the paper, we designed LOS moving algorithm which convert LOS command to gimbal velocity command to move LOS properly. We modeled a differential kinematic equation and then change the joystick command into velocity command of gimbals. This algorithm generate velocity command of each gimbal for same horizontal direction command. Finally, we verified performance through MATLAB/Simulink.

• 대한기계학회논문집B
• /
• 제38권1호
• /
• pp.9-16
• /
• 2014

본 논문은 경사진 원형관에서 표면장력과 중력으로 구동되는 비뉴턴 유체(멱법칙 모델)의 유동 및 변위를 이론적으로 연구한 것이다. 그리고 표면장력에 의하여 연속적으로 원형관 내로 유입되는 비뉴턴 유체의 변위를 기술하기 위한 지배방정식을 처음으로 개발하였다. 뉴턴의 운동방정식으로부터 유도된 식은 2계 비선형이며 비제차인 형태의 상미분 방정식이다. 지배방정식의 해를 수평관에서 변위를 시간의 함수로 기술한 식 및 실험과 비교한 결과 정량적으로 동일한 일치를 보였다. 여기에 더하여 정상상태인 힘의 균형식의 결과에 대해서도 정확한 일치로 나타남을 확인할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제24권5호
• /
• pp.621-639
• /
• 2006

Stability of a cylindrical shell subject to a uniform axial compression, which is a power function of time, is examined within the framework of small strain elasto-plasticity. The material of the shell is incompressible and the effect of the elastic unloading is considered. Initially, employing the infinitesimal elastic-plastic deformation theory, the fundamental relations and Donnell type stability equations for a cylindrical shell have been obtained. Then, employing Galerkin's method, those equations have been reduced to a time dependent differential equation with variable coefficient. Finally, for two initial conditions applying a Ritz type variational method, the critical static and dynamic axial loads, the corresponding wave numbers and dynamic factor have been found. Using those results, the effects of the variations of loading parameters and the variations of power of time in the axial load expression as well as the variations of the radius to thickness ratio on the critical parameters of the shells for two initial conditions are also elucidated. Comparing results with those in the literature validates the present analysis.

• 정보보호학회논문지
• /
• 제25권2호
• /
• pp.261-270
• /
• 2015

스마트카드와 같은 정보보호 디바이스에서 데이터를 보호하기 위해 사용되는 RSA 암호 알고리즘은 부채널 분석에 취약함이 밝혀졌다. 특히 암호 알고리즘이 수행되는 동안 소비되는 전력 패턴을 관찰하여 분석에 활용하는 전력 분석공격에 취약하다. 전력 분석 공격은 대표적으로 단순 전력 분석과 차분 전력 분석이 있고, 이 외 충돌 분석 등이 있다. 그 중에서 충돌 분석은 단순 전력 분석 및 차분 전력 분석에 안전하게 설계된 RSA 암호 알고리즘이라도 단일 파형을 이용하여 비밀 키 값을 찾을 수 있는 매우 강력한 공격기법이다. 따라서 기존 메시지 블라인딩 기법에 윈도우 기법을 적용한 대응기법이 고려되었지만, 이는 윈도우 크기가 작은 환경에서 충분히 큰 안전도를 제공하지 못한다. 이에 본 논문에서는 메시지 블라인딩 기법과 윈도우 기법이 적용된 RSA 암호 알고리즘에 지수 분할 기법을 혼합 적용하여 충돌분석에 더 높은 안전도를 제공하는 대응기법을 제시한다. 실험을 통해 본 논문에서 제시하는 대응기법이 윈도우 크기가 작은 환경에서 메시지 블라인딩 기법과 윈도우 기법만 적용된 기존 RSA 암호 알고리즘 보다 공격 복잡도가 약 124% 향상되어 더 높은 안전도를 제공함을 보였다.

• Steel and Composite Structures
• /
• 제38권5호
• /
• pp.477-496
• /
• 2021

The main objective of this paper is to study vibration of sandwich open cylindrical panel with damaged core and FG face sheets based on three-dimensional theory of elasticity. The structures are made of a damaged isotropic core and two external face sheets. These skins are strengthened at the nanoscale level by randomly oriented Carbon nanotubes (CNTs) and are reinforced at the microscale stage by oriented straight fibers. These reinforcing phases are included in a polymer matrix and a three-phase approach based on the Eshelby-Mori-Tanaka scheme and on the Halpin-Tsai approach, which is developed to compute the overall mechanical properties of the composite material. Three complicated equations of motion for the panel under consideration are semi-analytically solved by using 2-D differential quadrature method. Several parametric analyses are carried out to investigate the mechanical behavior of these multi-layered structures depending on the damage features, through-the-thickness distribution and boundary conditions. It is seen that for the large amount of power-law index "P", increasing this parameter does not have significant effect on the non-dimensional natural frequency parameters of the FG sandwich curved panel. Results indicate that by increasing the value of isotropic damage parameter "D" up to the unity (fully damaged core) the frequency would tend to become zero. One can dictate the fiber variation profile through the radial direction of the sandwich panel via the amount of "P", "b" and "c" parameters. It should be noticed that with increase of volume fraction of fibers, the frequency parameter of the panels does not increase necessarily, so by considering suitable amounts of power-law index "P" and the parameters "b" and "c", one can get dynamic characteristics similar or better than the isotropic limit case for laminated FG curved panels.

• 한국사회복지학
• /
• 제69권4호
• /
• pp.99-125
• /
• 2017

최근 공간에 대한 사회과학연구는 권력과 억압, 자원분배 등 권력관계 분석에 토대를 둔 사회적 공간 개념에 기초하여 공간에 작동하는 사회적 관계를 변화시키는 데에 초점을 두어왔다. 그러나 인간을 둘러싼 환경의 중요성을 강조해온 사회복지에서는 정작 현대 공간학에 대한 이해를 담보하지 못하고 공간을 중성적이고 추상적인 차원에서 이해해 온 경향이 있다. 이에 본 연구에서는 대표적인 공간사회학자인 Lefebvre의 사회적 공간이론을 중심으로 이 시대의 공간담론을 정리하고, 그 내용에 근거하여 '공간기반 사회복지실천(Space-based Social Work Practice)'의 개념정립을 시도하였으며, 실제 사회복지 현장사례를 통해 공간기반 사회복지실천의 적용가능성을 검토해 보았다. 이러한 결과를 토대로 공간기반 사회복지 실천이 대안적 방법론으로 가질 수 있는 함의를 논하고 그 실천적 방향을 제시하였다.

• 대한기계학회논문집
• /
• 제6권4호
• /
• pp.390-396
• /
• 1982

The onset of longitudinal vortices in horizontal Blasius flow isothermally heated from below is studied analytically. The assumption that at the onset of thermal instability the thermal disturbances are confined within the thermal boundary layer is employed for the limiting case of large Prandtl number. Polynomial representations for the basic quantities obtained by the integral method of the boundary layer analysis have been used. Then the system of differential equations and boundary conditions for disturbance quantities is reformulated in a convenient form so that the solutions may be constructed as rapidly convergent power series. The critical buoyancy parameter G $r_{x}$ $^{*}$ /R $e^{*1.5}$ falls between 2 and 6, which is about one order of magnitude lower than the existing experimental values. It is also shown that the positions of the onset of instability can be closely predicted by the present theory.y.y.

• 한국의류학회지
• /
• 제25권3호
• /
• pp.537-547
• /
• 2001

The purpose of this study was to develop the measurement of the fashion sensibility. The stimulus were 91 photos selected in fashion magazines and had dominant visual power under detail, color, texture and pattern in the elements of fashion design. The semantic differential scale was constructed bipolar 25 pairs. The obtained data were analyzed by cluster analysis, factor analysis, ANOVA and t-test. The results were as follows; 1. The hierarchical structure was combined a natural and interesting, sensitive and lovely fashion sensibility. 2. The constructing factors of fashion sensibility were found out as aesthetic value, maturity, character and femininity·masculinity.(total variance: 55.7%) 3. Fashion sensibility by elements of fashion design was significantly different regarding all factors. 4. Fashion sensibility by demographic variables sex, age, marriage, education, occupation and expenditure was significantly different regarding partial factors.

• 한국산업융합학회 논문집
• /
• 제3권1호
• /
• pp.69-75
• /
• 2000

Multichip packages are comprised of dissimilar materials which expand at different rates on heating. The differential expansion must be accommodated by the various structural elements of the package. A types of heat exposures occur operation cycles. This study presents a finite element analysis simulation of flip-chip among multichip. The effects of geometries and material properties on the reliability were estimated during the analysis of temperature and thermal stress of flip-chip. From the results, it could be obtained that the more significant parameters to the reliability of flip-chip arc chip power cycle, heat convection and height of solder bump.

• Steel and Composite Structures
• /
• 제15권2호
• /
• pp.175-202
• /
• 2013

The super convergent laminated composite beam element is newly derived for the lateral stability analysis. For this, a theoretical model of the laminated composite beams is developed based on the first-order shear deformation beam theory. The present laminated beam takes into account the transverse shear and the restrained warping induced shear deformation. The second-order coupling torque resulting from the geometric nonlinearity is rigorously derived. From the principle of minimum total potential energy, the stability equations and force-displacement relationships are derived and the explicit expressions for the displacement parameters are presented by applying the power series expansions of displacement components to simultaneous ordinary differential equations. Finally, the member stiffness matrix is determined using the force-displacement relationships. In order to show accuracy and superiority of the beam element developed by this study, the critical lateral buckling moments for bisymmetric and monosymmetric I-beams are presented and compared with other results available in the literature, the isoparametric beam elements, and shell elements from ABAQUS.