• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권6호
• /
• pp.2118-2138
• /
• 2014

Risks are involved in all phases of the software life cycle, and due to these risks, software can face various problems that can cause different negative outcomes and sometimes, in extreme cases, the failure of the software. Most of these risks lie in the legacy software migration process. These risks can create many problems, and in the worst case they can lead to the failure of the migration project. This paper explores different types of risk analysis methods such as CRAMM, CORAS, OCTAVE and VECTOR. After comparing these methods, the two suitable methods were chosen, namely, OCTAVE and VECTOR. Based on the use of these two methods, the project suggests an enhanced EOV method for risk analysis in the migration of legacy software.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 춘계 학술대회논문집
• /
• pp.58-65
• /
• 1999

The two different approaches for solving the nonlinear ship wave problem are disscussed in the present paper. The first one is based on a panel method which neglects the viscous effects. Another one is based on a finite volume method which solves RANS equations. The present paper has been focused on the advantages/disadvantages of the above two methods. The developed methods are applied to calculating the flow around Wigley hull & Series 60 hull to validate the performance of the present nonlinear method, Although the two methods employ quite different numerical approaches, the calculated wave patterns from the both methods show good agreements with the experiments.

• 부모자녀건강학회지
• /
• 제14권1호
• /
• pp.28-35
• /
• 2011

Purpose: The aim of this study is to suggest a direction for the development of effective methods for relieving labor pain, by analyzing non-pharmacological interventions through a literature review. Methods: Collection of literature data in this study has been accomplished through theses, reports, and academic data searched on databases of the Research Information Sharing Services (Riss), PubMed, ProQuest, and the National Discovery for Science Leaders (NDSL). Results: Non-pharmacological interventions analyzed as effective in relieving labor pain, in literature published both within and outside of Korea, included: pre-delivery education, Yoga, Doula delivery care, Massage, Music therapy, Aromatherapy, Hypnosis, TENS, Sterilized water injection, and Acupuncture. Conclusion: Several different interventions have been attempted for the relief of labor pain. Since even the same intervention shows different results depending on the research method utilized, critical factors must be acknowledged that compromise the effectiveness of these methods. In addition, study of potential synergy effects of interventions that combine these various methods might also prove to be significant.

• 한국분무공학회지
• /
• 제27권2호
• /
• pp.101-108
• /
• 2022

Performance and emissions with different diesel injection methods were analyzed in a natural gas-diesel, dual-fuel engine under low-load conditions. Natural gas was supplied to intake port during the intake stoke to form a natural gas-air premixed mixture for all methods. Diesel was injected directly into the cylinder during the compression stroke in three ways: early injections, late injections, and a combination of early and late injections. The early injections had the highest thermal efficiency among the three methods owing to its highest combustion efficiency. The wide dispersion of diesel before the combustion initiation also allowed superior emissions characteristics.

• The Journal of Advanced Prosthodontics
• /
• 제12권6호
• /
• pp.376-382
• /
• 2020

PURPOSE. To determine the shear bond strengths of different denture base resins to different types of prefabricated teeth (acrylic, nanohybrid composite, and cross-linked) and denture teeth produced by computer-aided design/computer-aided manufacturing (CAD/CAM) technology. MATERIALS AND METHODS. Prefabricated teeth and CAD/CAM (milled) denture teeth were divided into 10 groups and bonded to different denture base materials. Groups 1-3 comprised of different types of prefabricated teeth and cold-polymerized denture base resin; groups 4-6 comprised of different types of prefabricated teeth and heat-polymerized denture base resin; groups 7-9 comprised of different types of prefabricated teeth and CAD/CAM (milled) denture base resin; and group 10 comprised of milled denture teeth produced by CAD/CAM technology and CAD/CAM (milled) denture base resin. A universal testing machine was used to evaluate the shear bond strength for all specimens. One-way ANOVA and Tukey post-hoc test were used for analyzing the data (α=.05). RESULTS. The shear bond strengths of different groups ranged from 3.37 ± 2.14 MPa to 18.10 ± 2.68 MPa. Statistical analysis showed significant differences among the tested groups (P<.0001). Among different polymerization methods, the lowest values were determined in cold-polymerized resin.There was no significant difference between the shear bond strength values of heat-polymerized and CAD/CAM (milled) denture base resins. CONCLUSION. Different combinations of materials for removable denture base and denture teeth can affect their bond strength. Cold-polymerized resin should be avoided for attaching prefabricated teeth to a denture base. CAD/CAM (milled) and heat-polymerized denture base resins bonded to different types of prefabricated teeth show similar shear bond strength values.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.935-940
• /
• 2002

This paper presents the failure mode on Headed Bars and prediction of tensile capacity, which is governed by concrete cone failure. 17 different plate types, three different concrete strengths and three different welding types of specimens were simulated. Static tensile load was applied Headed Bars were manufactured in different areas, and their shape and thickness are based on ASTM 970-98. Calculation of embedment length in concrete is conducted based on CSA 23.3-94, and static tensile load was applied. Tested pullout capacities were compared to the values determined using current design methods such as ACI-349 and CCD method.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제12권3호
• /
• pp.153-160
• /
• 2008

A size-biased Poisson distribution is defined. Its characterization by using a recurrence relation for first order negative moment of the distribution is obtained. Different estimation methods for the parameter of the model are also discussed. R-Software has been used for making a comparison among the three different estimation methods.

• Applied Biological Chemistry
• /
• 제29권4호
• /
• pp.372-374
• /
• 1986

Changes in moisture content and degrees of gelatinization during cooking of sweet potatoes by different cooking methods were studied. The samples were cooked by boiling, steaming, gas oven or microwave oven baking. Changes in the moisture content of sweet potato during cooking were +30.0% by boiling, +4.4% by steaming, -5.8% by gas oven baking, and -46.6% by microwave oven baking. The degrees of gelatinization of sweet potatoes were 83.8%, 75.7%, 73.0% and 67.7%, respectively.

• 대한수학회보
• /
• 제55권5호
• /
• pp.1405-1417
• /
• 2018

The aim of this work is to introduce several different volume computational methods of graph polytopes associated with various types of finite simple graphs. Among them, we obtained the recursive volume formula (RVF) that is fundamental and most useful to compute the volume of the graph polytope for an arbitrary finite simple graph.

• 한국관개배수논문집
• /
• 제5권1호
• /
• pp.32-46
• /
• 1998

This study was conducted to derive optimal design floods by generalized gamma distribution model of the annual maximum series at six watersheds along Han and Nag Dong river systems. Design floods obtained by different methods for estimation of parameters