• 한국유체기계학회 논문집
• /
• 제16권6호
• /
• pp.19-25
• /
• 2013

The effect of tip gap height on heat/mass transfer characteristics on the floor of cavity squealer tip has been investigated in a turbine cascade for power generation by employing the naphthalene sublimation technique. The squealer rim height is chosen to be an optimal one of $h_{st}/c$ = 5.51% for the tip gap height-to-chord ratios of h/c = 1.0, 2.0, 3.0 and 4.0%. The results show that heat transfer on the cavity floor is strongly dependent upon the behavior of the cavity flow falling down onto the floor. For lower h/c, the floor heat transfer is influenced by the tip leakage flow falling down along the inner face of the suction-side squealer, whereas the floor heat transfer for higher h/c is augmented mainly due to the impingement of leakage flow on the floor near the leading edge. Compared to the plane tip surface heat transfer, the cavity floor heat transfer is less influenced by h/c. For h/c = 1.0%, the average thermal load is as low as a half of the plane tip surface one, and the difference in the thermal load between the two cases tends to decrease with increasing h/c.

• 디지털융복합연구
• /
• 제14권9호
• /
• pp.325-329
• /
• 2016

얼굴인증은 다양한 생체인증 중에서 거부감이 적고 변조가 어려워서 각광받고 있다. 얼굴인증의 알고리즘은 어떻게 알고리즘을 만드느냐에 따라서 정확성과 속도에 많은 차이를 가져온다. 눈동자를 추적 및 검출하여 얼굴의 검출 데이터와 함께 데이터를 추출함으로써 오탐률을 개선하고 정확하게 얼굴로 인증을 할 수 있도록 알고리즘을 연구하였다. Cascade를 통해서 얼굴을 검출하고 관심영역으로 지정 후 얼굴 영역을 균등하게 4등분하여 검출되는 객체의 좌표 값을 저장한다. 또한 검출된 눈에서 눈동자를 검출하기 위하여 이진화를 진행하고 Hough 변환을 통해 눈동자를 검출한다. 추출된 눈동자의 중심좌표를 저장하고 계산하여 데이터 매칭을 통해 얼굴 인증을 한다. 눈동자를 추적과 함께 얼굴의 데이터를 계산하여 정확하고 최적화된 얼굴인증 알고리즘을 연구한다.

• 한방재활의학과학회지
• /
• 제25권4호
• /
• pp.93-103
• /
• 2015

Objectives The purpose of this study is to compare the effects of ultra sound (U/S) and chuna on lumbago by meridian muscle electrography (MMEG). we performed U/S and chuna on erector spinae muscle. Methods This study was carried out on 20 lumbago patients. 20 patients were divided into U/S group and chuna group. U/S group take treatment 5 minutes. Chuna group take treatment 10 minutes. After performing U/S and chuna treatment 6 times, we compared both in terms of VAS, ODI, ROM, root mean square (RMS) and special edge frequency (SEF) on erector spinae muscle. The effect of each treatments are compared by Wilcoxon's signed rank test. The difference of effect between both groups are compared by Wilcoxon's rank-sum test. Results 1. Both U/S group and chuna group showed significant improvement in VAS and ODI after treatment. 2. U/S group showed insignificant improvement in both RMS and SEF. 3. Chuna group showed significant improvement in SEF at left lower point and RMS at left upper point. 4. Both U/S group and chuna group showed insignificant improvement in ROM. 5. There are no significant differences between both groups except SEF at left upper point. Conclusions According to above results, we found out that performing U/S or chuna on erector spinae muscle has effect in terms of VAS and ODI. But, in terms of SEF, we found out different result for both side. And we can't found out effect in terms of RMS and ROM of L-spine.

• 복식
• /
• 제55권1호
• /
• pp.13-24
• /
• 2005

Throughout the history of fashion and fashion collections, fashion design has been influenced by fine arts. Philosophy and concept of fine arts has been inspiration on the development of fashion design which brings on the close interrelation between fine arts and modern fashion. In order to analyze the affect of fine arts such as Pop art on fashion this study inquires into new perspective that considers different social contexts on the premise that acknowledges the essential difference between the genre of fine arts and design. This study researches the influence of Pop art which has been inspiration on fashion designers since the birth in the 1960s and often appears in recent fashion trends. In view of the results achieved in this study, Pop art-inspired fashion does not concern the aesthetic contemplation of everyday life in western society anonymously as in Pop art but deals with pop art as new ideas in a way that adopts images randomly from designer's convenience which is equivalent to the conception of pastiche. In addition, it was inferred that Peter Pan syndrome exert influence as a mental process and Kidult trend operate on Pop art-inspired fashion as a social phenomenon. On the basis of the theoretical background, the formative features in Pop art-inspired fashion from Spring/Summer 2000 to Spring/Summer 2004 collection has been analyzed. The results fall on the following four categories; those are the use of Pop color which resembles the Hard-edge technique in Pop art, direct appropriation of Pop art such as Andy Warhol and Roy Lichitenstein's works on clothes and accessories, adaptation of Pop art's subject using brand names of mass products or icons in mass culture as design motives, and application of representation method in Pop art such as Andy Warhol's silk screen techniques or Tom Wesselman's composition of pictures.

• 대한조선학회논문집
• /
• 제51권1호
• /
• pp.1-7
• /
• 2014

The present study numerically investigated the effect of the advance ratio on the wake characteristics of the marine propeller in the propeller open water test. Therefore, a wide range of the advance ratio(0.2${\kappa}-{\omega}$SST Model are considered. The three-dimensional vortical structures of tip vortices are visualized by the swirl strength, resulting in fast decay of the tip vortices with increasing the advance ratio. Furthermore, to better understanding of the wake evolution, the contraction ratio of the slip stream for different advance ratios is extracted from the velocity fields. Consequently, the slip stream contraction ratio decreases with increasing the advance ratio and successively the difference of the slip stream contraction ratio between J=0.2 and J=0.8 is about 0.1R.

• 한국광학회지
• /
• 제22권6호
• /
• pp.283-290
• /
• 2011

수증기의 혼합비를 측정하기 위하여 라만 라이다 시스템을 설계 제작하였다. 시스템을 검증하기 위하여 가강수량과 분포에 대하여 상용 마이크로파 라이오메터(MWR)와 GPS 신호를 이용하는 방법과 비교 연구를 수행하였다. GNSS 방법으로 측정한 총가강수량과 본 라이다 방법에서는 작은 차이를 보였는데, 이는 라이다 방법으로 얻을 수 있는 수증기의 측정고도가 제한적이기 때문이다. 반면에 MWR 방법과 라이다 방법으로 얻은 고도에 따른 수증기량은 수증기량이 급격하게 변하는 구름 경계나 경계고도 근처에서 심한 차이를 보이고 있었다. MWR은 그 밀도가 급격하게 변하는 곳에서 취약한 점을 보였으나 개발된 라만 라이다의 경우는 그 밀도가 급격히 변하는 곳에서도 측정이 원활하게 이루어지고 있음을 알 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제25권10호
• /
• pp.844-848
• /
• 2012

Encapsulant curing in terms of convection oven leads to thermal induced stress due to nonuniform thermal conductivity in LED package. We have adopted infrared (IR) light for silicone curing in order to release the stress. The light uniformity irradiated on an encapsulant surface is confirmed to be uniform by optical simulation. Shear strength of die paste using IR compared to convection oven is increased 19.2% at the same curing time, which indicates curing time can be shortened. The indentation depth difference between center and edge of silicone encapsulant in terms of convection oven and IR are 14.8% and 3.4%, respectively. Curing by IR also shows 2.3% better radiant flux persistency rate of LED at $85^{\circ}C$ after 1,000 h reliability test compared to convection curing.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1762-1773
• /
• 2014

In this paper, a distributed image coding scheme for multi-view video through an efficient generation of side information is proposed. A distributed video coding technique corrects the errors in the side information, which is generated with the original image, by using the channel coding technique at the decoder. Therefore, the more correct the generated side information is, the better the performance of distributed video coding. The proposed technique is to apply the distributed video coding schemes to the image coding for multi-view video. It generates side information by selectively and efficiently using both 3-dimensional warping based on the depth map with spatially adjacent frames and motion-compensated temporal interpolation with temporally adjacent frames. In this scheme the difference between the adjacent frames, the sizes of the motion vectors for the adjacent blocks, and the edge information are used as the selection criteria. From the experiments, it was observed that the quality of the side information generated by the proposed technique was improved by the average peak signal-to-noise ratio of 0.97dB than the one by motion-compensated temporal interpolation or 3-dimensional warping. The result from analyzing the rate-distortion curves revealed that the proposed scheme could reduce the bit-rate by 8.01% on average at the same peak signal-to-noise ratio value, compared to previous work.

• 한국정보통신학회논문지
• /
• 제11권11호
• /
• pp.2143-2149
• /
• 2007

최근 시각 장애인을 위한 인공망막 모델 구현에 관한 연구 중 시피질 자극기 기술은 시각 자극 전달의 중간 단계를 생략하고 직접 뇌세포를 자극하는 것이다. 본 논문에서는 망막에서 시각 피질로 시각정보를 전달할 때 발생하는 시각 피질의 특성, 즉 방향성에 대한 반응 특성을 특징 데이터로 구성하여 인식함으로써 인간 시각 정보 처리와 유사한 영상 추출 및 인식 모델을 제안한다. 제안된 방법은 영상의 특징을 추출 한 후 Delta-bar-delta 기반 오류 역전파 알고리즘을 적용하여 영상의 특징들을 인식한다. 제시된 방법의 성능을 분석하기 위하여 다양한 숫자 패턴들을 대상으로 실험한 결과, 제안된 망막 세포로부터 전달된 정보를 방향성에 대한 민감성을 고려하여 영상의 특성을 추출하여 인식하는 모델이 기존의 영상 추출 및 인식 모델보다 인식률에 있어서는 별 차이가 없지만 다양한 실험에서 확인할 수 있듯이 인간 시각과 같이 인식 성능이 민감하지 않는 것을 알 수 있었다.

• 대한토목학회논문집
• /
• 제39권5호
• /
• pp.587-594
• /
• 2019

하천 내 흐름에 대한 식생 밀도의 영향을 조사하기 위해 버드나무가 활착된 하천 규모의 자연형 수로에서 유동 측정 실험을 수행하였다. 식생 내 흐름에 대한 하천 규모 실험은 식생의 반 잠김 조건에 대해 수행되었다. 수로 내 식생대(vegetation patch)는 교차로 형성된 사주의 형상으로 배열되었고 식생 구간과 비식생 구간에서의 흐름을 비교하였다. 3차원 유동 구조는 초음파 유속계(Acoustic Doppler Velocimeter)에 의해 측정되었고 종방향 속도의 연직 분포는 다양한 지점에서의 측정값으로부터 분석되었다. 유속은 식생대의 밀도에 따라 다른 양상을 보여 주는데, 식생 구간와 비식생 구간에서의 흐름 속도의 차이는 밀집된 식생대 주변에서 크게 나타나며 흐름 분포의 형태는 식생대의 하류방향 하단에서 복잡한 모습을 나타낸다. 하류에 위치한 식생대 주변의 흐름은 상류에 설치된 식생대에 의해 교란된 흐름에도 불구하고 유사한 분포를 보여준다.