References
- Mayle, R. E., and Metzger, D. E., 1982, "Heat Transfer at the Tip of an Unshrouded Turbine Blade," Proceedings of 7th International Heat Transfer Conference, Vol. 3, pp. 87-92.
- Chyu, M. K., Moon, H. K., and Metzger, D. E., 1989, "Heat Transfer in the Tip Region of Grooved Turbine Blades," ASME Journal of Turbomachinery, Vol. 111, pp. 131-138. https://doi.org/10.1115/1.3262247
- Azad, Gm. S., Han, J.-C., Teng, S., and Boyle, R. J., 2000, "Heat Transfer and Pressure Distributions on a Gas Turbine Blade Tip," ASME Journal of Turbomachinery, Vol. 122, pp. 717-724. https://doi.org/10.1115/1.1308567
- Azad, Gm. S., Han, J.-C., and Boyle, R. J., 2000, "Heat Transfer and Pressure Distributions on the Squealer Tip of a Gas Turbine Blade," ASME Journal of Turbomachinery, Vol. 122, pp. 725-732. https://doi.org/10.1115/1.1311284
- Papa, M., Goldstein, R. J., and Gori, F., 2003, "Effect of Tip Geometry and Tip Clearance on the Mass/Heat Transfer From a Large-Scale Gas Turbine Blade," ASME Journal of Turbomachinery, Vol. 125, pp. 90-96. https://doi.org/10.1115/1.1529190
- Nasir, H., Ekkad, S. V., Kontrovitz, D, M., Bunker, R. S., and Prakash, C., 2004, "Effect of Tip Gap and Squealer Geometry on Detailed Heat Transfer Measurements over a High Pressure Turbine Rotor Blade Tip," ASME Journal of Turbomachinery, Vol. 126, pp. 221-228. https://doi.org/10.1115/1.1731416
- Lee, S. W. and Chae, B. J., 2008, "Effect of Squealer Rim Height on Aerodynamic Losses Downstream of a High-Turning Turbine Rotor Blade," Experimental Thermal and Fluid Science, pp. Vol. 32, 1440-1447. https://doi.org/10.1016/j.expthermflusci.2008.03.004
- Goldstein, R. J. and Cho, H. H., 1995, "A Review of Mass Transfer Measurements Using Naphthalene Sublimation," Experimental Thermal and Fluid Science, Vol. 10, pp. 416-434. https://doi.org/10.1016/0894-1777(94)00071-F
- Abernethy, R. B., Benedict, R. P. and Dowdell, R. B., 1985, "ASME Measurement Uncertainty," ASME Journal of Fluids Engineering, Vol. 107, pp. 161-164. https://doi.org/10.1115/1.3242450
- Lee, S. W., Moon, H. S., and Lee, S. E., 2009, "Tip Gap Height Effects on Flow Structure and Heat/Mass transfer over Plane Tip of a High-Turning Turbine Rotor Blade," International Journal of Heat and Fluid Flow, Vol. 30, pp. 198-210. https://doi.org/10.1016/j.ijheatfluidflow.2008.12.009
Cited by
- vol.17, pp.2, 2014, https://doi.org/10.5293/kfma.2014.17.2.068