• Journal of Korean Society of Disaster and Security
• /
• v.12 no.1
• /
• pp.57-66
• /
• 2019

One of the most serious problems with concrete small dams or barriers installed in small/median rivers is the deposit of sediments, especially, in Korea. An effective way to discharge such sediments to downstream is to construct a bypass pipe under the river bed. However, efficiency may become lowered if ripraps are entered into the bypass pipe. Therefore, in this study, we derived the threshold condition for the exclusion of ripraps from the bypass pipe using 3D numerical analysis. Upstream flow of the small dam was assumed to be stationary, and the energy concept was applied to the control volume containing the bypass pipe and its periphery. As a result, when the ratio of the water level difference between upstream and downstream to the diameter of the riprap was approximately equal to 1.2, the threshold condition for exclusion of the stones or riprap from the bypass pipe was affirmatively determined. If the characteristics of the adsorptive sediment adversely affecting the river environment in the future would be taken into account, results from this study are expected to put to practical use in the management of concrete small dam with bypass pipe system.

• Journal of Periodontal and Implant Science
• /
• v.49 no.1
• /
• pp.2-13
• /
• 2019

Purpose: The aim of this study was to conduct a histologic evaluation of irradiated calvarial defects in rats 4 weeks after applying fibroblast growth factor-2 (FGF-2) with hyaluronan or biphasic calcium phosphate (BCP) block in the presence or absence of adjunctive hyperbaric oxygen (HBO) therapy. Methods: Twenty rats were divided into HBO and non-HBO (NHBO) groups, each of which was divided into FGF-2 and BCP-block subgroups according to the grafted material. Localized radiation with a single 12-Gy dose was applied to the calvaria of rats to simulate radiotherapy. Four weeks after applying this radiation, 2 symmetrical circular defects with a diameter of 6 mm were created in the parietal bones of each animal. The right-side defect was filled with the materials mentioned above and the left-side defect was not filled (as a control). All defects were covered with a resorbable barrier membrane. During 4 weeks of healing, 1 hour of HBO therapy was applied to the rats in the HBO groups 5 times a week. The rats were then killed, and the calvarial specimens were harvested for radiographic and histologic analyses. Results: New bone formation was greatest in the FGF-2 subgroup, and improvement was not found in the BCP subgroup. HBO seemed to have a minimal effect on new bone formation. There was tendency for more angiogenesis in the HBO groups than the NHBO groups, but the group with HBO and FGF-2 did not show significantly better outcomes than the HBO-only group or the NHBO group with FGF-2. Conclusions: HBO exerted beneficial effects on angiogenesis in calvarial defects of irradiated rats over a 4-week healing period, but it appeared to have minimal effects on bone regeneration. FGF-2 seemed to enhance new bone formation and angiogenesis, but its efficacy appeared to be reduced when HBO was applied.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.5
• /
• pp.1325-1334
• /
• 2021

This study reports the development of a manufacturing method of synthesizing colloidal gold using catalysts available for cosmetics and an anti-aging ampoule with skin improvement effects using it. Nano-colloidal gold was synthesized by using ascorbic acid and sodium borohydride as a reducing catalyst in hydrogen tetrachloroaurate tetrahydrate. It was confirmed that the particles became smaller as the mass of the content of ascorbic acid, which is a catalyst, increased. On the other hand, as the mass of sodium borohydride increased, the particle size tended to increase. In order to control the colloidal gold reaction rate, particles having 100 to 500 nm of a particle diameter distribution could be obtained using xanthan gum and hydroxyethylcellulose. The optimal synthesis conditions could be obtained by reacting for 1 to 4 hours at 18℃, a reduced pressure state of 20 to 75 mmHg, a stirring speed of 10~50 rpm. The synthesized colloidal gold had a unique smell of dark pink, pH = 5.5, specific gravity of 1.0032, and viscosity of 80 to 310 cps. As an application of skin care cosmetics, anti-aging ampoule has been developed, and it is expected to be used for various prescriptions and formulations using it.

• Membrane Journal
• /
• v.29 no.5
• /
• pp.263-275
• /
• 2019

In the present study, thickness of MOR zeolite membranes was controlled by changing seed size, seeding amount, and aging time of hydrothermal solution, and then effect of membrane thickness on pervaporative ethanol dehydration for 90 wt.% ethanol-water mixture was investigated. First, nanosize MOR zeolite seeds with a diameter of 20 to 30 nm was successfully prepared by planetary milling a laboratory synthesized MOR zeolites and the coating amount was controlled by seed concentration and infiltration volume of coating solution during vacuum-assisted seeding. As seeding amount decreased, membrane thickness was reduced up to around $4{\mu}m$. The MOR zeolite membrane having a thickness of $4{\mu}m$ showed a water/ethanol separation factor of 760 and water flux of $1.0kg/m^2h$. The excellent water flux was due to the reduced membrane thickness which was derived from the nanosize seed. Therefore, it could be concluded that membrane thickness control by using nanosize seed can be a crucial factor to improve pervaporative water flux of MOR zeolite membrane.

• Resources Recycling
• /
• v.29 no.6
• /
• pp.104-113
• /
• 2020

Bubble size in froth flotation has long been recognized as a key factor which affects the bubble residence time, the bubble surface area flux (Sb) and the carrying rate (Cr). This paper presents method of bubble size measurement, relationship between operating variables and gas dispersion properties in flotation column. Using high speed camera and image analysis system, bubble size has been directly measured as a function of operating parameters (e.g., superficial gas rate (Jg), superficial wash water rate (Jw), frother concentration) in flotation column. Relationship compared to measured and estimated bubble size was obtained within error ranges of ±15~20% and mean bubble size was 0.718mm. From this system the empirical relationship to control the bubble size and distribution has been developed under operating conditions such as Jg of 0.65~1.3cm/s, Jw of 0.13~0.52cm/s and frother concentration of 60~200ppm. Surface tension and bubble size decreased as frother concentration increased. It seemed that critical coalescence concentration (CCC) of bubbles was 200ppm so that surface tension was the lowest (49.24mN/m) at frother concentration of 200ppm. Bubble size tend to increase when superficial gas rate (Jg) decreases and superficial wash water rate Jw and frother concentration increase. Gas holdup is proportional to superficial gas rate as well as frother concentration and superficial wash water rate (at the fixed superficial gas rate).

• Explosives and Blasting
• /
• v.39 no.2
• /
• pp.1-14
• /
• 2021

Recently, with the development of high-performance processing devices such as GPGPU, a three-dimensional dynamic analysis technique that can replace expensive rock material impact tests has been actively developed in the defense and aerospace fields. Experimentally observing or measuring fracture processes occurring in rocks subjected to high impact loads, such as blasting and earth penetration of small-diameter missiles, are difficult due to the inhomogeneity and opacity of rock materials. In this study, a three-dimensional dynamic fracture process analysis technique (3D-DFPA) was developed to simulate the fracture behavior of rocks due to impact. In order to improve the operation speed, an algorithm capable of GPGPU operation was developed for explicit analysis and contact element search. To verify the proposed dynamic fracture process analysis technique, the dynamic fracture toughness tests of the Straight Notched Disk Bending (SNDB) limestone samples were simulated and the propagation of the reflection and transmission of the stress waves at the rock-impact bar interfaces and the fracture process of the rock samples were compared. The dynamic load tests for the SNDB sample applied a Pulse Shape controlled Split Hopkinson presure bar (PS-SHPB) that can control the waveform of the incident stress wave, the stress state, and the fracture process of the rock models were analyzed with experimental results.

• Journal of Korean Society of Forest Science
• /
• v.100 no.3
• /
• pp.359-366
• /
• 2011

The objective of this study was to analyze the changes of crown fire hazard possibility from the effects of forest tending works (FTW) in Pinus densiflora stands in Korea. The study sites were located in Youngju (FTW) and Bonghwa (Control) areas. Ten representative sample trees were destructively felled at each areas to analyze the crown fuel characteristics. The results of this study showed that crown fuel moisture content in Youngju and Bonghwa areas were 103.6% and 104.4%, respectively. The needles and twigs with less than 1cm diameter accounted 50.3% of the total crown fuel load in Youngju area and 62.0% in Bonghwa area. On the other hand, it was observed in Youngju that the canopy bulk density was $0.11kg/m^3$ lower but have 1.3 m higher average canopy base height therefore having a possibility of lower crown fire hazard as compared to Bonghwa that had higher canopy bulk density and lower canopy base height.

• FLOWER RESEARCH JOURNAL
• /
• v.26 no.4
• /
• pp.216-220
• /
• 2018

Freesia (Freesia hybrida Hort.) 'Sweet Lemon' was developed for the cut flowers in National Institute of Horticultural Herbal Science, Rural Development Administration, Korea in 2015. This hybrid was crossed and selected from 'Teresa' and 'Yvonne' in 2007. Morphological characteristics of the selected freesia hybrid were investigated for 5 years from 2009 to 2014, and then it was named 'Sweet Lemon' in 2015. 'Sweet Lemon' has double and lemon petals (RHS color chart Y2B). The average flower diameter was 6.8 cm and the average yield is 6.7. The growth of the plant is vigorous and the average plant height is 99.0cm, which is 34.7cm higher than the standard cultivar 'Yvonne'. The average floret number per stalk of 'Sweet Lemon' was 10.7, and stalk length was 7.7 cm. The average days to first flowering of 'Sweet Lemon', 126 days, was approximately 20 days earlier than the control cultivar. It's average vase life and yield is 8.7 days and 5.6 cormlets per plant, respectively. Totally 58 of volatile compounds were identified using gas chromatography-mass spectrometry (GC-MS), the major components were linalool, alpha-terpineol, alpha-selinene, and limonene.

• Korean Journal of Organic Agriculture
• /
• v.29 no.1
• /
• pp.111-123
• /
• 2021

This study was conducted to investigate the growth characteristics of strawberries and N₂O emission by treating the compost for each type of livestock manure, which was an organic farming material, as a basal fertilization in plastic film house. Livestock manure compost, which made from cattle manure, swine manure, and poultry manure as raw materials, were applied to this experiment, treated by mixing or single on the basis of nitrogen content with the standard amount of fertilizer for strawberries. Total emission of N₂O were 10.7% higher than those in poultry manure compost treatment compared to the inorganic fertilizer treatment, but 16.5~41.9% lower than those in other livestock manure compost treatment. The period of N₂O emission mainly was up to the 17th day after fertilizer application, accounting for 70~87% of the total amount of discharge, and 13~30% of the total amount was emitted for 158 days later. N₂O emission was decreased significantly NH₄⁺-N content in the soil, and increased NO₃^--N. As compared with control, the number of leaves, leaf width and crown diameter of livestock manure compost treatments were not significantly different, leaf length of cattle+poultry, cattle+ swine, swine+poultry treatment higher, and SPAD (soil plant analysis development) values of cattle+poultry treatment highest. There was no significant difference in weight and sugar content of strawberry fruits among treatments.

• Journal of People, Plants, and Environment
• /
• v.23 no.6
• /
• pp.655-665
• /
• 2020

Background and objective: This study was conducted to compare the cultivation environment, growth of cut flowers, and management performance of conventional farms and smart farms growing the standard cut chrysanthemum, 'Jinba'. Methods: Conventional and smart farms were selected, and facility information, cultivation environment, cut flower growth, and management performance were investigated. Results: The conventional and smart farms were located in Muan, Jeollanam-do, and conventional farming involved cultivating with soil culture in a plastic greenhouse, while the smart farm was cultivating with hydroponics in a plastic greenhouse. The conventional farm did not have sensors for environmental measurement such as light intensity and temperature and pH and EC sensors for fertigation, and all systems, including roof window, side window, thermal screen, and shading curtain, were operated manually. On the other hand, the smart farm was equipped with sensors for measuring the environment and nutrient solution, and was automatically controlled. The day and night mean temperatures, relative humidity, and solar radiation in the facilities of the conventional and the smart farm were managed similarly. But in the floral differentiation stage, the floral differentiation was delayed, as the night temperature of conventional farm was managed as low as 17.7℃ which was lower than smart farm. Accordingly, the harvest of cut flowers by the conventional farm was delayed to 35 days later than that of the smart farm. Also, soil moisture and EC of the conventional farm were unnecessarily kept higher than those of the smart farm in the early growth stage, and then were maintained relatively low during the period after floral differentiation, when a lot of water and nutrients were required. Therefore, growth of cut flower, cut flower length, number of leaves, flower diameter, and weight were poorer in the conventional farm than in the smart farm. In terms of management performance, yield and sales price were 10% and 38% higher for the smart farm than for the conventional farm, respectively. Also, the net income was 2,298 thousand won more for the smart farm than for the conventional farm. Conclusion: It was suggested that the improved growth of cut flowers and high management performance of the smart farm were due to precise environment management for growth by the automatic control and sensor.