• 대한안전경영과학회지
• /
• 제3권3호
• /
• pp.221-230
• /
• 2001

The assembly tolerance design methods have applied linear or nonlinear programming methods and used simulation method and search algorithms to optimize the tolerance allocation of each part in an assembly. However, those methods are only considered to the relationship between tolerance and manufacturing cost, which do not consider a quality loss cost for each part tolerance. In this paper, the integrated simulation model used genetic algorithm and the Monte-Carlo simulation method was developed for the allocation of the optimal tolerance considering the manufacturing cost and quality loss cost.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1063-1068
• /
• 2008

A lens system of a camera module for mobile phones is comprised of the composition and design of various shapes of lens. To improve responses such as the modular transfer function (MTF), a lens system should always be constructed by considering uncertainty that can be caused by manufacturing and assembly error. In this study, tolerance optimization using the Latin Hypercube Sampling (LHS) technique is performed. In order to reduce the computational burden of the tolerance optimization process and decrease the influence from numerical noise effectively, we use the Progressive Quadratic Response Surface Modeling (PQRSM), which is one of Sequential Approximate Optimization (SAO) techniques. Using this method, we achieved optimal tolerance for each lens and obtained reliability for satisfying user‘s requirements. In addition, through the design process the manufacturing and assembly cost of a lens system was reduced.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.529-536
• /
• 2003

The majority of previous studios on tolerance synthesis have viewed the issue as a design methodology to determine optimal component tolerances on behalf of a manufacturer. while meeting given assembly tolerance requirements Although a considerable amount of research has been done on this issue. a couple of important questions still remain unanswered First. how ran a design engineer quantitatively incorporate a customer's perception on a product quality into a tolerance synthesis scheme at the early design stage Second. how ran component tolerances and assembly tolerance be optimized in a simultaneous way? To answer these questions. this article presents the customer-driven concurrent tolerance synthesis which is facilitated by the notion of truncated distribution and the use of mathematical programming techniques. while adopting the major principles of Tagurhl philosophy. The work presented in the article is an effort to gain insight, which can be useful in practice when setting up guidelines for an overall tolerance synthesis.

• 대한기계학회논문집A
• /
• 제25권3호
• /
• pp.452-460
• /
• 2001

Most of researches of tolerance optimization have used a simple sum of tolerance-cost functions with several constraint equations as an optimization model. However, if there is a machining sequence with more than one processes to complete a part, and machining failure, i.e., out-of-tolerance occurs at one of the intermediate processes, the tolerance-cost of this process should be added by the machining cost of all the previous processes already completed on the part. In this study, an accumulated scrap cost model(ASCM) is proposed considering the scrapped machining cost, and applied to a simple assembly example. The result of tolerance optimization using ASCM is compared with that of using a traditional optimization model to confirm its effectiveness.

• 대한기계학회논문집A
• /
• 제33권9호
• /
• pp.903-912
• /
• 2009

This study is focused on simulation-based dimensional tolerance optimization process (DTOP) to minimize vehicle pulls by reduction of dimensional variation in front suspension system. In previous studies, the effect of tires and wheel alignment sensitivity have mainly been investigated to eliminate vehicle pulls in nominal design condition without allocating optimal tolerance level for selected components, among various factors regarding vehicle pulls such as vehicle design parameters, vehicle weight balance, tires, and environmental factors. Unfortunately, there are wide variations in the real vehicle, and these have impacted actual vehicle pulls, especially wheel alignment effects from suspension geometry variation has not been considered in the previous studies. In the tolerance design of suspension, tolerance variables with the uncertainty such as parts dimensional variation, assembly process, datum position and direction, and assembly tool tolerance has a great influence on the variation of the suspension dimensional performances. This study introduces total vehicle pull prediction model in considering major key factors for vehicle pull sensitivity. The Monte Carlo-based tolerance analysis model using Taguchi robust method is developed to optimize dimensional tolerance parameters, satisfying on the target variation level.

• 대한기계학회논문집A
• /
• 제27권6호
• /
• pp.905-913
• /
• 2003

Generally, most of optimization have been performed with fixed sizes and variables. But, the optimum value considering tolerance of design variables and material properties, might be useless owing to exist in infeasible region. It is needed that the tolerance of design variables and material properties is considered for a real design problem. A deterministic optimal solution can be in the feasible region by performing robust optimization considering tolerance. In the paper, robust design is suggested to gain an optimum insensitive to variation of design variables and it is applied for optimization problem of caliper disc brakes for vehicles.

• 한국정밀공학회지
• /
• 제31권1호
• /
• pp.59-66
• /
• 2014

The central seam, the vertical 'line' between doors, in the front view of a refrigerator must have its gap and flush within certain ranges to meet functional and aesthetic requirements. The conventional criteria for gap and flush control in the industry are to keep the gap and flush within certain ranges at each of various points along the seam. For aesthetics, however, the uniformity of the gap is also as important because a 'tapered' seam is negatively perceived by human eyes. This paper shows a case study of tolerance design for a refrigerator door system. It presents a step-by-step procedure, which consists of datum flow chain analysis, identification of assembly features, computer modeling of feature tolerances, assembly operations and measurements, tolerance simulation, and tolerance adjustments based on the simulation results. It is found that extra care may need to be used to satisfy the aesthetical criterion for gap uniformity.

• Journal of Welding and Joining
• /
• 제18권3호
• /
• pp.122-130
• /
• 2000

Due to the inherent dimensional uncertainty, the tolerances accumulate in the assembly of plasma cutting torch. Tolerance accumulation has serious effect on the performance of the plasma torch. This study proposes a statistical tolerance propagation model, which is based on matrix transform. This model can predict the final tolerance distributions of the completed plasma torch assembly with the prescribed statistical tolerance distribution of each part to be assembled. Verification of the proposed model was performed by making use of Monte Carlo simulation. Monte Carlo simulation generates a large number of discrete plasma torch assembly instances and randomly selects a point within the tolerance region with the prescribed statistical distribution. Monte Carlo simulation results show good agreement with that of the proposed model. This results are promising in that we can predict the final tolerance distributions in advance before assembly process of plasma torch thus provide great benefit at the assembly design stage of plasma torch.

• 품질경영학회지
• /
• 제36권2호
• /
• pp.20-27
• /
• 2008

Tolerance design has been identified as an important research area and a number of models have been proposed in the literature. This paper investigates the effect of limited capacity on tolerance design for products with nominal-the-best type (N-type) quality characteristics. The model is developed under the assumption that the reprocessed and nonreprocessed items are produced by the same manufacturing process and therefore their quality characteristics are identically and independently distributed. Profit models are constructed which involve four price/cost components; selling price, cost incurred by imperfect quality, reprocessing and quality inspection costs. Methods of finding the optimal tolerance limits are presented, and a numerical example is given. Sensitivity analyses are also performed to study the effect of a process standard deviation on this model.

• 대한안전경영과학회지
• /
• 제7권4호
• /
• pp.49-59
• /
• 2005

This paper is to propose various safety design models of tolerance specifications with different consumer requirements. In these models, tolerance specifications can be jointly determined by considering all the stochastic, economic, robust and engineering safety design factors with various characteristics of interest. In this paper, the proposed models are easily formulated for design engineers.