Browse > Article
http://dx.doi.org/10.3795/KSME-A.2009.33.9.903

Optimization of Geometric Dimension & Tolerance Parameters of Front Suspension System for Vehicle Pulls Improvement  

Kim, Yong-Suk (지엠대우오토앤테크놀로지)
Jang, Dong-Young (서울산업대학교, 산업정보시스템학과)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.33, no.9, 2009 , pp. 903-912 More about this Journal
Abstract
This study is focused on simulation-based dimensional tolerance optimization process (DTOP) to minimize vehicle pulls by reduction of dimensional variation in front suspension system. In previous studies, the effect of tires and wheel alignment sensitivity have mainly been investigated to eliminate vehicle pulls in nominal design condition without allocating optimal tolerance level for selected components, among various factors regarding vehicle pulls such as vehicle design parameters, vehicle weight balance, tires, and environmental factors. Unfortunately, there are wide variations in the real vehicle, and these have impacted actual vehicle pulls, especially wheel alignment effects from suspension geometry variation has not been considered in the previous studies. In the tolerance design of suspension, tolerance variables with the uncertainty such as parts dimensional variation, assembly process, datum position and direction, and assembly tool tolerance has a great influence on the variation of the suspension dimensional performances. This study introduces total vehicle pull prediction model in considering major key factors for vehicle pull sensitivity. The Monte Carlo-based tolerance analysis model using Taguchi robust method is developed to optimize dimensional tolerance parameters, satisfying on the target variation level.
Keywords
Vehicle Pulls; Vehicle Dynamics; Front Wheel Alignment; GD&T; Monte Carlo Simulation; Variation Analysis; Design of Experiment; Taguchi Robust Engineering; Quality Engineering;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
Times Cited By SCOPUS : 0
연도 인용수 순위
1 Oh, S. H. and Gim, G., 1998, ' Study on Vehicle Pull,' KSAE, Spring Conference Proceeding, pp. 645~650
2 Koo, B. K., Kim, S. J. and Cho, C. T., 2005, 'An Approach to Vehicle Pull Using ADAMS,' KSAE, Fall Conference Proceeding , pp. 1343~1348
3 Lee, J.W. and Mun, S. H., 1999, 'Tire and Vehicle Pull II . Basic theory, Simulation, and Verification,' KSAE, Fall Conference Proceeding, pp. 518~525
4 Lee, J. H. and Lee, J. W., 2000, 'Tire and vehicle pull I . Experimental Results,' KSAE, Vol. 8, No. 4, pp. 194~201   과학기술학회마을
5 Cho, Y. G., Park, J. Y. and Oh, Y. H., 2006, 'Theory of Vehicle Drift and Pull,' KSAE, Fall Conference Proceeding, pp. 767~772
6 Kim, J. Y., 1999, 'Optimal Tolerance Allocation using Genetic Algorithm, Monte Carlo Simulation and Quality Loss Function,' Seoul National University, Master Thesis, pp. 14~15
7 Shin, D. K., 1994, 'Robust Design and Tolerancing for Dynamic Systems,' KAIST, Master Thesis, pp. 4~10
8 Choo, Y. J., Son, J. M. and Kim, Y. S., 2007, 'Study on the Effect of Dimensional Tolerance in Vehicle Pull,' KSAE, Fall Conference Proceeding, Vol. II, pp. 713~719
9 Park, K. J., Lee, T. H., Lee, K. H. and Hwang, K. H., 2004, 'A Review of Robust Design Methodologies,' Trans of the KSME A, Vol. 28, No. 9, pp. 1368~1383   과학기술학회마을   DOI
10 Koo, B. K., Lee, C. H., Shin, Y. D. and Cho, C. T., 2006, 'An Study on Efficient Analysis Method of Vehicle Pull Using Deign Experiments,' KSAE, Fall Conference Proceeding , pp. 956~961
11 Choi, J. H., Lee, S. J. and Choi, D. H., 1998, 'Study on Tolerance and Reliability Analysis of Mechanical Systems with Uncertainty,' Journal of Mechanical Science and Technology, Vol. 22, No. 1, pp. 215~226   과학기술학회마을
12 Tahk, J. K., 2005, 'Accumulated Tolerance Analysis for Optimal Tolerance Design,' KSAE, Fall Conference Proceeding, pp. 1743~1752