• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2003년도 봄 학술발표대회논문집
• /
• pp.28-29
• /
• 2003

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.233-236
• /
• 2001

We have designed and fabricated ASK modulator MMIC operating at 5.8GHz for OBE used in AGPS (Automatic Gate Passing System). ASK modulator MMIC was designed to apply a sing1e supply voltage of 3V to the drain in order to decrease ACP (Adjacent Channel Power). The measurement result of this chip exhibits on/off characteristic over 30dB. The design parameters are optimized through ADS simulation tool. The layouts and fabrication o( ASK Modulator MMIC were designed and fabricated by using ETRI 0.5${\mu}{\textrm}{m}$ MESFET library. The chip sizes were 1mm $\times$1mm. The performance analysis of the implemented ASK Modulator based on the design parameters is accomplished.

• Advances in Computational Design
• /
• 제1권4호
• /
• pp.297-313
• /
• 2016

The flexural strength of circular concrete-filled tubes (CCFT) can be estimated by several codes such as ACI, AISC, and Eurocode 4. In AISC and Eurocode, two methods are recommended, which are the strain compatibility method (SCM) and the plastic stress distribution method (PSDM). The SCM of AISC is almost the same as the SCM of the ACI method, while the SCM of Eurocode is similar to the ACI method. Only the assumption of the compressive stress of concrete is different. The PSDM of Eurocode approach is also similar to the PSDM of AISC, but they have different definitions of material strength. The PSDM of AISC is relatively easier to use, because AISC provides closed-form equations for calculating the flexural strength. However, due to the complexity of calculation of circular shapes, it is quite difficult to determine the flexural strength of CCFT following other methods. Furthermore, all these methods give different estimations. In this study, an effort is made to review and compare the codes to identify their differences. The study also develops a computing program for the flexural strength of circular concrete filled tubes under pure bending that is in accordance with the codes. Finally, the developed computing algorithm, which is programmed in MATLAB, is used to generate design aid graphs for various steel grades and a variety of strengths of steel and concrete. These design aid graphs for CCFT beams can be used as a preliminary design tool.

• 한국멀티미디어학회논문지
• /
• 제22권12호
• /
• pp.1481-1490
• /
• 2019

Arduino makes it easy to connect objects and computers. As a result, programming learning using physical computing has been proposed as an effective alternative to SW training for beginners. In this paper, we propose an Arduino-based physical computing education method that can be applied to basic programming subjects. To this end, we propose a basic programming training method based on Arduino analog signals. Currently, physical computing courses focus on digital control when connecting input sensors and output devices in Arduino. However, the contents of programming education using analog signals of Arduino boards are insufficient. In this paper, we proposed and tested the teaching method used for programming education using low-cost materials used for Arduino analog signal-based computing.

• 한국정보처리학회논문지
• /
• 제7권6호
• /
• pp.1932-1940
• /
• 2000

We must solve problems caused by mobile computing environments for supporting efficient mobile computing services. The problem is the use of wireless medium having high error rates and low bandwidth, and the sudden network disconnection to reduce the power consumption of a mobile host and the cost of the network connection. For these problems, we proposed the architecture of the partial connection manager and designed and implemented that in this paper. In particular, The partial connection manager creates the limited number of mobile agents according to priority and sends them in parallel to server systems and combines results of them process rapidly the user request. By applying the proposed partial connection manager to the mobile computing services called cybermarket, we knew that the mobile agent technique could be suited to the mobile computing environment and overcome the partial connection problem caused by eh mobile computing environment.

• Educational Technology International
• /
• 제18권2호
• /
• pp.131-157
• /
• 2017

The purposes of the study were to investigate the participation of artists in paper circuit computing learning and to conduct an in-depth study on the formation and development of practical knowledge. To do this, we selected as research participants six artists who participated in the learning program of an art museum, and used various methods such as pre-open questionnaires, participation observation, and individual interviews to collect data. The collected data were analyzed based on community of practice theory. Results showed that the artists participated in the learning based on a desire to use new technology or find a new work production method for interacting with their audiences. In addition, the artists actively formed practical knowledge in the curriculum and tried to apply paper circuit computing to their works. To continuously develop the research, participants formed a study group or set up a practical goal through planned exhibitions. The results of this study can provide implications for practical approaches to, and utilization of, paper circuit computing.

• Structural Engineering and Mechanics
• /
• 제11권5호
• /
• pp.485-502
• /
• 2001

Modem soft computing methods, such as neural networks, evolutionary models and fuzzy logic, are mainly inspired by the problem solving strategies the biological systems use in nature. As such, the soft computing methods are fundamentally different from the conventional engineering problem solving methods, which are based on mathematics. In the author's opinion, these fundamental differences are the key to the full understanding of the soft computing methods and in the realization of their full potential in engineering applications. The main theme of this paper is to discuss the fundamental differences between the soft computing methods and the mathematically based conventional methods in engineering problems, and to explore the potential of soft computing methods in new ways of formulating and solving the otherwise intractable engineering problems. Inverse problems are identified as a class of particularly difficult engineering problems, and the special capabilities of the soft computing methods in inverse problems are discussed. Soft computing methods are especially suited for engineering design, which can be considered as a special class of inverse problems. Several examples from the research work of the author and his co-workers are presented and discussed to illustrate the main points raised in this paper.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2005년도 춘계 학술발표대회 논문집
• /
• pp.266-267
• /
• 2005

• 한국산업정보학회논문지
• /
• 제13권5호
• /
• pp.149-157
• /
• 2008

네트워크 및 컴퓨터 기술의 발전에 힘입어 컴퓨팅 서비스 방식에도 상당한 변혁이 일어나고 있다. 1960년대 메인프레임으로 출발하였던 컴퓨터 시스템은 1980년대 출시된 PC를 거쳐 이제는 서버 기반의 컴퓨팅 패러다임이라 할 수 있는 씬-클라이언트(Thin-Client)로 진화하고 있다. 씬-클라이언트 컴퓨팅방식에서 네트워크는 애플리케이션 전달을 위한 플랫폼으로서 그 역할을 수행하며 클라이언트는 원격에서 서버 상의 애플리케이션을 실행할 수 있다. 또한 네트워크에 접속된 컴퓨팅 자원을 공유하는 것도 가능하다. 씬-클라이언트 아키텍쳐 구현을 위한 한 방법으로 본 논문에서는 컴포넌트와 분산 컴퓨팅 기술을 제시하였고 그를 위한 기술로서 COM(Component Object Model)과 PYRO(PYthon Remote Objects)를 활용하였다. 본 논문에서는 씬-클라이언트의 개념과 원리를 시작으로 그를 구현하기 위한 기술적 응용에 대해 논의할 것이다. 그리고 이를 기반으로 씬-클라이언트의 아키텍쳐를 설계 및 구현하고자 한다.

• 한국정보시스템학회지:정보시스템연구
• /
• 제31권2호
• /
• pp.63-88
• /
• 2022

Purpose The purpose of this study is to empirically analyze the factors affecting the intention to use cloud computing in the smart work environment. This study is meaningful in that it examines the characteristics of smart work and the fit of cloud computing characteristics, and it is a study that reveals the factors affecting the intention to use cloud computing by applying the integrated model of TTF and TAM. Design/methodology/approach In order to understand the factors affecting the intention to use cloud computing in the smart work environment, a research model that integrates TTF and TAM with the hypothesis was proposed. In order to verify the research hypothesis, this study conducted a survey on individuals with experience in smart work and cloud computing. And with the data 280 collected in the survey, path analysis was performed using the PLS structural equation. Findings As a result, it was found that task characteristics and technology characteristics had a positive (+) effect on task-skill fit, and task-skill fit had a positive (+) effect on perceived ease of use and usefulness. Also, task-skill fit, perceived ease of use, and perceived usefulness were found to have a positive (+) effect on intention to use.