The Development of ASK Modulator for using Automatic Gate Passing System

자동게이트통관시스템에 사용하기 위한 ASK 변조기 MMIC 구현

  • Jang, Mi-Sook (Dept. of Electrical Electronics Computing Engineering, Dong-A University) ;
  • Ha, Young-Chul (Dept. of Electrical Electronics Computing Engineering, Dong-A University) ;
  • Hwang, Sung-Beam (Dept. of Electrical Information Communication Control, Kyung Nam College of Information & Technology) ;
  • Moon, Tae-Jung (Dept. of Electrical Information Communication Control, Kyung Nam College of Information & Technology) ;
  • Hur, Hyuk (Dept. of Electrical Electronics Computing Engineering, Dong-A University) ;
  • Song, Jeong-Geun (Dept. of Electrical Electronics Computing Engineering, Dong-A University) ;
  • Hong, Chang-Hee (Dept. of Electrical Electronics Computing Engineering, Dong-A University)
  • 장미숙 (동아대학교 전기전자컴퓨터공학부) ;
  • 하영철 (동아대학교 전기전자컴퓨터공학부) ;
  • 황성범 (경남정보대학 전자정보통신제어계열) ;
  • 문태정 (경남정보대학 전자정보통신제어계열) ;
  • 허혁 (동아대학교 전기전자컴퓨터공학부) ;
  • 송정근 (동아대학교 전기전자컴퓨터공학부) ;
  • 홍창희 (동아대학교 전지전자컴퓨터공학부)
  • Published : 2001.06.01

Abstract

We have designed and fabricated ASK modulator MMIC operating at 5.8GHz for OBE used in AGPS (Automatic Gate Passing System). ASK modulator MMIC was designed to apply a sing1e supply voltage of 3V to the drain in order to decrease ACP (Adjacent Channel Power). The measurement result of this chip exhibits on/off characteristic over 30dB. The design parameters are optimized through ADS simulation tool. The layouts and fabrication o( ASK Modulator MMIC were designed and fabricated by using ETRI 0.5${\mu}{\textrm}{m}$ MESFET library. The chip sizes were 1mm $\times$1mm. The performance analysis of the implemented ASK Modulator based on the design parameters is accomplished.

Keywords