• Applied Chemistry for Engineering
• /
• v.19 no.3
• /
• pp.270-276
• /
• 2008

$N_2$ doped $TiO_2$ nano-sized powder was prepared using a DC arc plasma jet and investigated with XRD, BET, SEM, TEM, and photo-catalytic decomposition. Recently the research interest about the nano-sized $TiO_2$ powder has been increased to improve its photo-catalytic activity for the removal of environmental pollutants. Nitrogen gas, reacting gas, and titanium tetrachloride ($TiCl_4$) were used as the raw materials and injected into the plasma reactor to synthesize the $N_2$ doped $TiO_2$ power. The particle size and XRD peaks of the synthesized powder were analyzed as a function of the flow rate of the nitrogen gas. Also, the characteristics of the photo-catalytic decomposition using the prepared powder were studied. For comparing the photo-catalytic decomposition performance of $TiO_2$ powder with that of $TiO_2$ coating, $TiO_2$ thin films were prepared by the spin coating and the pulsed laser deposition. For the results of the acetaldehyde decomposition, the photo-catalytic activity of $TiO_{2-x}N_x$ powder was higher than that of the pure $TiO_2$ powder in the visible light region. For the methylene blue decomposition, the decomposition efficiency of $TiO_2$ powder was also higher than that of $TiO_2$ film.

• Journal of Surface Science and Engineering
• /
• v.45 no.3
• /
• pp.97-105
• /
• 2012

The effects of pH, types of applied current, agitation method and time, additive on the amount of co-deposited $TiO_2$ particles in the matrix were investigated. The deposition rates increased with increasing pH values, while the volume fraction of $TiO_2$ particles and the size of agglomerated $TiO_2$ particles in the composite decreased. The volume fraction of $TiO_2$ particles in the composite decreased when pulsed current of 50% duty cycle was used. And the size of agglomerated $TiO_2$ particles in the nickel matrix of pulsed current was smaller than that of DC current specimen. The volume fraction of $TiO_2$ particles in the matrix decreased with longer time by air agitation, but in case of using magnetic bar, volume fraction in the same range of time was relatively constant. The volume fraction of the electrodeposited Ni-$TiO_2$ composite in the solution containing 0.01 M Dimethylamine borane (DMAB) increased slightly with increasing agitation time regardless of agitation methods. Thermal stability of the electrodeposited Ni-$TiO_2$ composite increased with lower pH at the temperature range of $200{\sim}800^{\circ}C$, and the results showed that the amount of co-deposited $TiO_2$ relies more on the deposition rate than zetapotential of $TiO_2$ particles.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.119-125
• /
• 2020

Transition metal dichalcogenides (TMDCs), two-dimensional atomic layered materials with direct bandgap in the range of 1.1-2.1 eV, have attracted a lot of research interest due to their high response to light and capability to build new types of artificial heterostructures. However, the large-area synthesis of high-quality and uniform TMDC films with vertical-stacked heterostructure still remains challenge. In this study, we have developed a metal-organic chemical vapor deposition (MOCVD) system for TMDCs and conducted a systematic study on the growth of single-layer TMDCs and their heterostructures. In particular, using a bubbler-type organometallic compound sources, the concentration and flow rate of each source can be precisely controlled to obtain uniformly single-layered MoS2 and WS2 films over the centimeter scale. In addition, the MoS2/WS2 vertical heterostructure was achieved by growing WS2 film directly on the MoS2 film, as confirmed by electron microscopy, UV-visible spectrophotometer, Raman spectroscopy, and photoluminescence spectroscopy.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.4
• /
• pp.149-153
• /
• 2021

ε-Ga₂O₃ thin films were grown on 4H-SiC substrates by metal organic chemical vapor deposition (MOCVD) and crystalline quality were evaluated depend on growth conditions. It was found that the best conditions of the ε-Ga₂O₃ were grown at a growth temperature of 665℃ and an oxygen flow rate of 200 sccm. Two-dimensional growth was completed after the merge of hexagonal nuclei, and the arrangement direction of hexagonal nuclei was closely related to the crystal direction of the substrate. However, it was confirmed that crystal structure of the ε-Ga₂O₃ had an orthorhombic rather than hexagonal. Crystal phase transformation was performed by thermal treatment. And a β-Ga₂O₃ thin film was grown directly on 4H-SiC for the comparison to the phase transformed β-Ga₂O₃ thin film. The phase transformed β-Ga₂O₃ film showed better crystal quality than directly grown one.

• Applied Chemistry for Engineering
• /
• v.17 no.4
• /
• pp.361-368
• /
• 2006

The purpose of this study is to invent the preparation technique of the foam-floater used as a level gauge of liquefied petroleum gas (LPG) tank under high pressure, which has not only closed pores but also has under 5 wt% changingrate in case of depositing 72 h in room-temperature LPG. In pressure-resistance and deposition experiment, the prepared foam-floaters with different sulfur (325 Mesh and 400 Mesh) and foaming agent (dinitrosopentamethylenetetramin; DPT and azodicarbonamide; AC) had a marginal difference in its weight changing-rate. However, the prepared floater with sulfur 400 Mesh and the foaming agent AC had smaller pores and higher closed pore-rate. Under $50kg_f/cm^3$ hydraulic pressure, the floater with medium thermal (MT) carbon showed a lower weight changing-rate than semi reinforcing furnace (SRF) carbon. Providing a post-treatment to the prepared floater, the hardness and the pressure-resistance of the inner pore-wall of floater were increased. Prepared floaters having a specific gravity below 0.30 were distorted and broken, and other floaters with a specific gravity above 0.35 were not useful as a floater because of the low buoyancy. Therefore, it was considered that the floaters with a specific gravity between 0.3~0.35 are the most useful as a floater under $50kg_f/cm^3$ pressure-resistance.

• Horticultural Science & Technology
• /
• v.19 no.3
• /
• pp.373-377
• /
• 2001

This study was conducted to find optimum pollination methods for overcoming pre-fertilization incompatibility in interspecific crosses between L. longiflorum 'Gelria' (LG) and L. cernuum (LC). In cross combination of $LC{\times}LG$, the survival rate of the ovaries was higher in the cut style pollinations than in normal stigmatic pollination. Among the various cut style pollination methods, pollination after cutting the styles 2 3mm length above the ovary and top of the ovary were the most effective ones. No ovaries and ovules survived in cross pollination of $LC{\times}LG$. In self-pollination of LG and cross pollination of $LC{\times}LG$, pollens germinated on the stigma by 12 hours and reached to the ovules by 90 hours after pollination. However, in the cross pollination of $LC{\times}LG$, pollen tubes elongated very slowly until 48 hours after pollination and a lot of deformed tubes were observed in the styler canal having swelled tube tip and irregular heavy callose deposition. The pollination time after anthesis also affected on the survival rate of ovaries and ovules showing the best result when pollinated on three days after anthesis. Stigma exudate promoted slightly the enlargement of ovaries, but the survival rate of ovaries and ovules was not increased.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.1-7
• /
• 2018

Tin dioxide, $SnO_2$, is applied as an anode material in Li-ion batteries and a gas sensing materials, which shows changes in resistance in the presence of gas molecules, such as $H_2$, NO, $NO_2$ etc. Considerable research has been done on the synthesis of $SnO_2$ nanostructures. Nanomaterials exhibit a high surface to volume ratio, which means it has an advantage in sensing gas molecules and improving the specific capacity of Li-ion batteries. In this study, $SnO_2$ nanostructures were grown on a Si substrate using a thermal CVD process with the vapor transport method. The carrier gas was mixed with high purity Ar gas and oxygen gas. The crystalline phase of the as-grown tin oxide nanostructures was affected by the oxygen gas flow rate. The crystallographic property of the as-grown tin oxide nanostructures were investigated by Raman spectroscopy and XRD. The morphology of the as-grown tin oxide nanostructures was confirmed by scanning electron microscopy. As a result, the $SnO_2$ nanostructures were grown directly on Si wafers with moderate thickness and a nanodot surface morphology for a carrier gas mixture ratio of Ar gas 1000 SCCM : $O_2$ gas 10 SCCM.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.12
• /
• pp.1785-1793
• /
• 2008

Fifty-four PIC barrows were used to evaluate the effects of lower dietary lysine content and energy level on carcass characteristics and meat quality in slaughter pigs. Pigs were allotted to one of three treatments by body weight with six replicate pens in each treatment. The dietary treatments for body weights of 20-50 kg, 50-80 kg and 80-90 kg were as follows, respectively: control diet (digestible energy 14.22 MJ/kg, lysine/DE 0.67 g/MJ, 0.53 g/MJ and 0.42 g/MJ); a low lysine group (digestible energy 14.22 MJ/kg, lysine/DE 0.49, 0.38 and 0.30 g/MJ); and a low lysine-low energy group or low nutrient group (digestible energy 13.11 MJ/kg, lysine/DE 0.49, 0.38 and 0.30 g/MJ). The daily weight gain, daily feed intake and feed efficiency were calculated in the overall growth period (nearly 12 weeks). Meanwhile, carcass characteristics and meat quality were evaluated at 60 and 90 kg body weight respectively. During the overall growth trial, lowering dietary lysine and nutrient level both decreased weight gain (p<0.05) and feed efficiency (p<0.01). At 60 kg body weight, decreasing dietary lysine and nutrient level noticeably decreased dressing percentage (p<0.01) and back fat depth at last rib of PIC pigs (p<0.01), but enhanced marbling scores (p<0.10), intramuscular fat content (p<0.10) and water loss rate (p<0.01) of the longissimus dorsi muscle. At 90 kg body weight, lean percentage (p<0.01) was evidently reduced by both lowering lysine content and nutrient level in the diet. However, the shoulder back fat depth (p<0.05) and marbling scores of the loin eye muscle (p<0.05) were increased; Lowering dietary nutrient level could improve back fat depth of 10th rib (p<0.01) and last rib (p<0.01), intramuscular fat content (p<0.10), redness (p<0.01) and water loss rate of the loin eye muscle (p<0.05), but decrease loin area (p<0.05). Finally, when comparing the 60 kg and 90 kg slaughter weights, it was found that the shoulder back fat depth (p<0.01, p<0.10), 6th-7th rib (p<0.01, p<0.01), 10th-rib (p<0.01, p<0.01) and last rib back fat depth (p<0.01, p<0.01) of the low lysine and low nutrient group were all obviously increased comparing with the control group. Taken together, the results showed that decreasing dietary lysine content and nutrient level increased intramuscular fat content and water loss rate of longissimus dorsi muscle; On the other hand, both lowering dietary lysine and nutrient level markedly compensated to increase back fat deposition in the later finishing period (body weight from 60 to 90 kg) in contrast to the control group.

• The Journal of Korean Physical Therapy
• /
• v.15 no.4
• /
• pp.1-12
• /
• 2003

The purpose of this study was to investigate the effect of high voltage pulsed current stimulation (HVPCS) on the healing rate of a dermal wound in a rat. We also determined the mechanism of promoting healing by HVPCS. Twenty male Sprague-Dawley rats were randomly divided into two group; HVPCS group (n=10) and control group (n=10). The HVPCS rats received electrical stimulation with a current intensity of 50 V at 100 pps for a duration of 30 minutes, while the control group was given the same treatment without electricity for a week. The biopsy specimens were fixed in formalin, embedded in paraffin and stained with Masson's trichrome, hematoxylin and eosin (H&E). The fibroblasts and collagen density were counted using a light microscope and computerized image analysis system and calculated as the density and the percent. A Student t-test showed a significantly higher wound healing rate of the HVPCS group than control (t=-4.161, p<0.001). The fibroblasts in the HVPCS group were higher than in the control group (t=-4.921, p<0.001). The density of collagen in the HVPCS group was also higher than in the control group (t=-4.367, p<0.001). These results indicate that the HVPCS accelerated the rate of healing in dermal wound, and increased fibroblasts and collagen density in the regenerative dermis. These findings suggest that the HVPCS may activate fibroblasts by alteration of the electrical environment, and it may increase collagen synthesis in the regenerative dermal wound.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.6
• /
• pp.838-843
• /
• 2002

The objectives of this study were to examine growth performance and meat quality by three different feeding patterns in Korean native cattle (KNC). In each of 3 years, fifteen KNC were randomly assigned in a (3 feeding management)${\times}$(3 sex) factorial design experiment; thus, in total, there were 5 animals in each of the 9 treatments. The three feeding management treatments were longterm (24 month) restriction feeding (LTFR), long-term restriction feeding-hormone implant (LTFR-tH), and short-term (18 month) nonrestriction feeding (STFNR). Three sexes were bull, steer, and heifer. Concentrate diet was fed restriction-feeding method based on body weight in LTFR and LTFR-tH. However, the diet was fed ad libitum in STFNR. Hormonal implantation was made three times with M-$PO^{TM}$ for bulls and with F-$TO^{TM}$ for heifers at 18, 20, 22 month of age in LTFR-tH. Animal were purchased from the local cattle market and managed in two local farms and at the university research unit. Animals were slaughtered at 24 months for long-term trial and at 18 month for short-term trial. The growth rate was the highest in bulls and the lowest in heifers. However, the differences were diminished in F-$TO^{TM}$ implanted heifers. The average daily gain was high in STFNR due to ad libitum feeding. The carcass grade was similar among the treatments on percentage bases. Hormonal implants improved significantly the meat quality grade in all sexes. Castration increased body fat content and improved meat quality grade by intramuscular fat deposition. In conclusion, long-term feeding and hormone treatment increased meat quality grade more than short-term feeding. However, ADG was higher in the short-term trial although feedefficiency was lower.