• Smart Structures and Systems
• /
• v.29 no.3
• /
• pp.387-393
• /
• 2022

This paper presents the vibration analysis of cracked ceramic-reinforced aluminum composite beams by using a method based on changes in modal strain energy. The crack is considered to be straight. The effective properties of composite materials of the beams are estimated through Mori-Tanaka micromechanical model. Comparison study and numerical simulations with various parameters; ceramic volume fraction, reinforcement aspect ratio, ratio of the reinforcement Young's modulus to the matrix Young's modulus and ratio of the reinforcement density to the matrix density are taken into investigation. Results demonstrate the pronounced effects of these parameters on intact and cracked ceramic aluminum beams.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.33 no.4
• /
• pp.84-95
• /
• 1991

The compaction ratio of the field dry density to the maximum dry density is generally adopted as the index of quality control for embankment of earthfill structures such as Earth Dam, Sea Dike, River Bank and Road. In case of coarse materials are included in the earth material, the compaction ratio will be varied in wide range since the dry density is influenced by quantity of coarse material in the soil. The treatment for the coarse material should be controlled carefully in testing. In this study, the compaction characteristics of the soil contained the coarse materials were researched and calibration of the suitability of field quality control methods were carried out. 28 Samples were made of clay(CL) and sandy soil (SM) mixed with gravel whose content were 0, 4, 6, 8, 10, 12, 15, 20, 25, 30, 35, 40, 45, and 60% in Weight. The compaction characteristics depending on the coarse material content were analysed through 4 types of compaction tests which are A-1, B-i, C-i and D-1. The adjusting coefficients for density and moisture content namely a and ${\beta}$ respectively were proposed in order to consider the effects depending on content of the coarse materials. The test methods to control reasonably and promptly the quality of earthfill were proposed after analysing the ranges of possible errors on the relative compaction ratio between laboratory compaction methods and field density testing methods.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.2
• /
• pp.262-269
• /
• 2008

The aim of this study was to determine the effects of breeder age and stocking density on performance, carcass characteristics and some stress parameters (H-L ratio, serum glucose, cholesterol and triglyceride levels, tonic immobility test (TI), antibody production, relative asymmetry (RA) and external appearances). This experiment was carried out with 705 one-day old male broiler chicks (Ross 308) obtained from three different ages of broiler breeder (32, 48 and 61 wks). Each age group was randomly divided into two stocking density groups (11.9 and 17.5 broilers per $m^2$) with 5 replications per group. The experimental period was 6 weeks. Broilers from 32 wk-old breeders had lower initial weight (p<0.001), body weight gain of the first 3 week of rearing (p<0.01), the percentage of abdominal fat (p<0.001) and serum cholesterol level (p<0.01); higher percentage of gizzard (p<0.01) and longer TI duration (p<0.001) than those from 48 and 61 wk-old breeders. Broilers reared at 17.5 b/m2 had lower final BW, body weight gain, feed consumption, feather condition and foot health (p<0.001), higher percentage of heart, H-L ratio, serum glucose and cholesterol levels (p<0.001), and longer TI durations (p<0.001). There were no significant interactions in examined parameters except for feed to gain ratio between breeder age and stocking density.

• Journal of Powder Materials
• /
• v.22 no.2
• /
• pp.111-115
• /
• 2015

This study investigates the microstructure and thermal shock properties of polycrystalline diamond compact (PDC) produced by the high-temperature, high-pressure (HPHT) process. The diamond used for the investigation features a $12{\sim}22{\mu}m$- and $8{\sim}16{\mu}m$-sized main particles, and $1{\sim}2{\mu}m$-sized filler particles. The filler particle ratio is adjusted up to 5~31% to produce a mixed particle, and then the tap density is measured. The measurement finds that as the filler particle ratio increases, the tap density value continuously increases, but at 23% or greater, it reduces by a small margin. The mixed particle described above undergoes an HPHT sintering process. Observation of PDC microstructures reveals that the filler particle ratio with high tap density value increases direct bonding among diamond particles, Co distribution becomes even, and the Co and W fraction also decreases. The produced PDC undergoes thermal shock tests with two temperature conditions of 820 and 830, and the results reveals that PDC with smaller filler particle ratio and low tap density value easily produces cracks, while PDC with high tap density value that contributes in increased direct bonding along with the higher diamond content results in improved thermal shock properties.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.5
• /
• pp.669-678
• /
• 2009

The reduction of excess activated sludge from petrochemical plant was investigated by the electro fenton (E-Fenton) process using electrogenerated hydroxyl radicals which lead to mineralization of activated sludge to $CO_2$, water and inorganic ions. Factors affecting the disintegration efficiency of excess activated sludge in E-Fenton process were examined in terms of five criteria: pH, $H_2O_2/Fe^{2+}$ molar ratio, current density, initial MLSS (mixed liquid suspended solids) concentration, $H_2O_2$ feeding mode. TSS total suspended solid and $TCOD_{cr}$ reduction rate increased with the increasing $H_2O_2/Fe^{2+}$ molar ratio and current density until 42 and $6.7 mA/cm^2$, respectively but further increase of $H_2O_2/Fe^{2+}$ molar ratio and current density would reduce the reduction rate. On the other hand, as expected, increasing pH and initial MLSS concentration of activated sludge decreas TSS and $TCOD_{cr}$ reduction rate. The E-Fenton process was gradually increased during first 30 minutes and then linearly proceed till 120 minutes. The optimal E-Fenton condition showed TSS reduction rate of 62~63% and $TCOD_{cr}$ (total chemical oxygen demand) reduction rate of 55~56%. Molar ratio $H_2O_2/Fe^{2+} = 42$ was determined as optimal E-Fenton condition with initial $Fe^{2+}$ dose of 5.4 mM and current density of $6.7{\sim}13.3 mA/cm^2$, initial MLSS of 7,600 mg/L and pH 2 were chosen as the most efficient E-Fenton condition.

• Journal of Korea Multimedia Society
• /
• v.16 no.9
• /
• pp.1077-1088
• /
• 2013

As broadcasting is the process that a node sends a packet to all nodes in the network. it is basic process used for discovering of a routes to a node and disseminating of control information message in Mobile Ad hoc NETwork (MANET). In this paper, we propose dynamically adjusted probabilistic mechanism based on distance ratio and node density for broadcasting in MANETs. The distance ratio can be calculated as the ratio of the radio strength length to the distance from sender of a node, and node density can be get from 1-hop nodes of neighbours. A mobile node receiving broadcast packets determines the probability of rebroadcasting considering distance ratio and node density of itself. Rebroadcast probability will be set as low value to a node which is located in nearby area of sender and has high 1-hop node density, So it reduces packets transmission caused by the early die-out of rebroadcast packets. Compared with the simple flooding and fixed probabilistic flooding by simulation, our approach shows better performances results. Proposed algorithm can reduce the rebroadcast packet delivery more than 30% without scanting reachability, where as it shows up to 96% reachability compared with flooding.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.8
• /
• pp.42-51
• /
• 2021

Investigations of process parameters are essential when fabricating high-quality parts using additive manufacturing. This study investigates the change in the mechanical characteristics of a SUS316L specimen fabricated using selective laser melting based on the energy density and bead overlap ratio. The SUS316L powder particles were spherical and 35 ㎛ in size. Single-bead and hexahedral shape deposition experiments were performed sequentially. A single bead experiment was performed to obtain the bead overlap ratios for different laser parameters utilizing laser power and scan speed as experimental parameters. A hexahedral shape deposition experiment was also performed to observe the difference in mechanical properties, such as the internal porosity, surface roughness, and hardness, based on the energy density and bead overlap ratio of the three-dimensional printed part. Laser power, scan speed, overlap ratio, and layer thickness were chosen as parameters for the hexahedral shape deposition experiment. Accordingly, the energy density applied for three-dimensional printing, and the experimental parameters were calculated, and the energy density and bead overlap ratio for fabricating parts with good properties have been suggested.

• Korean journal of applied entomology
• /
• v.42 no.3
• /
• pp.233-240
• /
• 2003

The effect of density suppression of Amblyseius fallacis (Garman) against Panonychus citri (McGregor) on citrus tree introduced with some different ratio was investigated. When it was introduced with over 16:1 (Panonychus citri: A. fallacis) ratio, Panonychus citri was suppressed very effectively. And in case of introduced once or two times with 20: 1 ratio when the density of Panonychus citri was reached 0.5 and 1.0 per leaf, the density of A. fallacis was formed highly, but the suppression effect against Panonychus citri was not effective. Also, the density changes of P. citri and A. fallacis on the citrus tree released with 10: 1 ratio (P. citri: A. fallacis) when the density of P. citri was reached about 0.1 per leaf in plastic film house were investigated. In case of released twice at the interval of 10 days, the density of A. fallacis was high and P. citri was suppressed so effectively over two month. On the inside of canopy of the citrus tree planted in plastic film house, the air temperature was much lower than on the outside of canopy, while relative humidity was much higher.

• Journal of the Korean Institute of Rural Architecture
• /
• v.19 no.1
• /
• pp.35-42
• /
• 2017

This study aims to investigate the change in building density and residential environment after the reconstruction of decrepit public rental housing complexes formed in accordance with the Land Readjustment Project during the 1970s-80s. The results of this study can be summarized as follows: First, in terms of change in residential environment after the reconstruction, floor plans that were limited to two to four types and to small apartments measuring $42.9m^2$(13py)-$56.1m^2$ (17py) became varied, presenting 5-6 types of floor plans and various sizes of apartments. In particular, the reconstructed apartments were mainly built in a size smaller than 85($m^2$) and in the 3LDK floor plan and staircase-style unit architectural structure in order to reflect the lifestyle of residents. Second, in terms of change in building density after the reconstruction, the building coverage ratio did not change a lot, but the floor area ratio showed great change depending on the complex, ranging from a minimum of 2.9 times (Singdong Complex) to a maximum of 5.4 times (Eoyangdong Complex). Such change is attributable to the reconstruction policy that aims to improve the residential environment for original residents, secure economic feasibility and efficiency, and reflect the lifestyle of residents while incorporating dividends assigned to the existing housing project members as well as the maximum floor area ratio allowed by the regulation. Additionally, in terms of change in the number of floors and building density after the reconstruction, the former 5-story apartments were changed to apartments with 16-28 stories. Accordingly, the number of households in each complex has also increased by 20%. Third, according to the characteristics of parking facilities in terms of the size and density of parking spaces, former apartment complexes had only aboveground parking lots, not underground parking area. The newly constructed apartment complexes have underground parking space, and the parking-housing ratio is 1.1-1.3 cars.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.2
• /
• pp.38-51
• /
• 2018

This study was carried out to improve the performance characteristics of nozzleless boosters that are used in ramjet boosters. A propellant using Zr as the metal fuel was developed, which provided a higher density than the propellant using Al as the metal fuel. The developed propellant was cast using the nozzleless booster and a ground test was carried out by varying the length-to-diameter ratio (L/D ratio) of the propellant. From a comparison between the performance characteristics of propellants using Zr and Al, it was proved that the performance of the propellant using Zr is higher than that of propellant using Al, except for the specific impulse, under all tested conditions. As the length-to-diameter ratio was increased, the specific impulse of the propellant using Zr was decreased by 88% compared with that of the propellant with Al. However, because of the density difference between the propellants, the impulse density of the propellant with Zr was higher than that of the propellant with Al under all tested conditions.