• 대한전자공학회논문지
• /
• 제26권4호
• /
• pp.1-6
• /
• 1989

본 논문은 gyro의drift에 관한 일반적 등가회로를 처음에 발진기의 위상안정을 규정화 하기 위하여 개발되었던 structure function 방법을 사용하여 분석하였다. 이 방법을 사용함으로서 임의의 order의 확정성, 내지 불확정성 성격의 Gyro drift가 쉽게 규정화되고 또 측정될 수 있음을 보였다. 그리고, drift의 power spectal density와 structure function과의 관계도 분명히 하였다. 마지막으로 이 방법을 이용하여 drift가 제어시스템에 끼치는 분석함이 매우 용이하게 됨을 보였다.

• 대한기계학회논문집
• /
• 제14권5호
• /
• pp.1290-1299
• /
• 1990

본 연구에서는 이러한 개념을 확장하여 직경이 26nm와 38nm인 두 개의 수평관 내 기액 2상유동에서 오리피스의 차압교란치의 확률밀도함수, 자기상관함수와 파워 스 펙트럼 밀도함수를 구하여 유동양식에 따른 이 들 통계치의 특성을 구명하였다. 본 연구에서 다룬 유동양식은 기포, 플러그, 슬러그, 성층, 파상, 환상, pseudo-slug 유 동이다. 이 결과 차압교란치의 통계적 해석을 통한 유동양식 판별법이 매우 유용하 다는 사실을 밝혔으며, 또 본 판별법을 관내 압력강하치의 통계적 해석을 통하여 유동 양식을 구분한 타 연구자들의 방법과 비교 분석하였다.

• 한국해안해양공학회지
• /
• 제10권4호
• /
• pp.204-210
• /
• 1998

최대 엔트로피 방법을 이용하여 강한 비정규분포과정의 특성을 갖는 비선형 불규칙 파고의 확률밀도 함수를 유도하였다. 파랑의 파고가 쇄파고(또는 수심)에 의해 제한되고 파고의 1, 2차 모멘트만 주어졌을 경우, 유도된 확률밀도함수는 $H_{b}$ (쇄파고), $H_{m}$(평균파고), $H_{rms}$(파고의 제곱평균평방근)의 매개변수로 폐합형(closed form)으로 표시된다. 파고의 3차 이상의 모멘트가 주어진 경우에는 최대 엔트로피를 갖는 확률밀도함수의 매개변수를 구하기 위해서 비선형 적분 방정식 계를 Newton-Raphson 방법을 이용하여 수치적으로 구하였다. 최대 엔트로피 방법을 이용하여 유도된 파고의 확률밀도함수를 비정규분포의 특성이 강한 실측자료와 비교하였다. 실측자료는 폭풍시 중간수심과 천해에서 측정된 쇄파고에 가까운 자료로서 강한 비선형 불규칙 파랑의 특성을 지니며, 이 경우에도 유도된 확률밀도함수가 측정된 파고의 막대그래프와 잘 일치하였다. 강한 비선형 불규칙파의 특성을 갖는 파랑의 파고일 경우에도 파고의 1, 2차 모멘트만으로도 파고의 분포를 잘 나타낼 수 있었다. 최대 엔트로피 방법을 이용하여 구해진 파고의 확률분포함수는 해안구조물의 설계파를 결정하는 극치파고분포와 파고의 통계적인 특성을 추정하는데 매우 유용하게 이용될 수 있다.

• 한국해양공학회지
• /
• 제13권3호통권33호
• /
• pp.29-35
• /
• 1999

At the design of Mark III membrane type LNG tank, an analytical and experimental approach on the fatigue strengths of membrane and its welds are very important in order to assist designers and surveyors. In this study, fatigue tests of lap weld of Mark III membrane type LNG tank were carried out and cumulative damage factor was calculated in order to estimate the fatigue life by probability density function and rule methods. It contained the following tests and reviews : 1) The fatigue tests of lap weld of stainless steel according to statistical testing method recommended by JSME, 2)Preparation of S-N curve for lap welds considering the statistical properties of the results of fatigue tests. 3) Procedure for estimating the initiation life of fatigue crack of lap welds under variable loads by the rule lf classification society and probability density function, 4) Guideline for inspection of lap welds fo membrane type LNG tank.

• 대한산업공학회지
• /
• 제23권4호
• /
• pp.729-739
• /
• 1997

In this paper, steady-state controllable M/G/1 queueing systems operating under the dyadic policies are considered. A new method to obtain the expected busy period when the D-policy is involved in system operation, is developed. This new method requires derivation of so called 'the pseudo probability density function' of the busy period for the system under consideration, which is completely different from its actual probability density function. However, the proposed pseudo probability density function does generate the correct expected busy period through simple procedures.

• Journal of Mechanical Science and Technology
• /
• 제17권10호
• /
• pp.1496-1506
• /
• 2003

The SIMP (solid isotropic material with penalization) approach is perhaps the most popular density variable relaxation method in topology optimization. This method has been very successful in many applications, but the optimization solution convergence can be improved when new variables, not the direct density variables, are used as the design variables. In this work, we newly propose S-shape functions mapping the original density variables nonlinearly to new design variables. The main role of S-shape function is to push intermediate densities to either lower or upper bounds. In particular, this method works well with nonlinear mathematical programming methods. A method of feasible directions is chosen as a nonlinear mathematical programming method in order to show the effects of the S-shape scaling function on the solution convergence.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1984년도 추계학술발표회 논문집
• /
• pp.100-106
• /
• 1984

Traditional methods for estimating the location of underwater target, i.e. the triangulation method and the wavefront curvature method, have been utilized. The location of a target is defined by the range and the bearing, which estimates can be obtained by evaluating the time delay between neighboring sensors. Many components of error occur in estimating the target range, among which the error due to the fluctuation of heading angle is outstanding. In this paper, the wavefront curvature method was used. We considered the error due to the heading fluctuation as the $\beta$-density process, from which we analized the range estimates with $\beta$-density function exist in some finite limits, and its mean value and variation are depicted as a function of true range and heading fluctuation. Given heading angles and sensor separation, maximum estimated heading errors are presented as a function of true range.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1987년도 춘계학술발표회 논문집
• /
• pp.191-195
• /
• 1987

When a 160QAM receiver in the band of spread spectrum system is interfered with a pseudo-random frequency-hopp-ing signal the interference signal has the form of the pulse amplitude probability density function. Each interfrering pulse amplitude probability density function Each interfering pulse amplitude is dependent upon theprobability density function of hopping frequency and the selectivity characteristic of 16QAM system in this paper the error rate equation of a system performance has been derived in the above condition which are interfrerence form and impulsive noise environmensts. The results of system analysis show us that the system performance is de-graded by impulsive noise and interference power, which improved as the frequency hopping bandsidth increases whit respect to receiver bandwidth

• 한국연소학회지
• /
• 제15권4호
• /
• pp.15-21
• /
• 2010

The transported probability density function(PDF) model has been applied to simulate the turbulent nonpremixed piloted jet flame. To realistically account for the mixture fraction PDF informations on the turbulent non-premixed jet flame, the present Lagrangian PDF transport approach is based on the joint velocity-composition-turbulence frequency PDF formulation. The fluctuating velocity of stochastic fields is modeled by simplified Langevin model(SLM), turbulence frequency of stochastic fields is modeled by Jayesh-Pope model and effects of molecular diffusion are represented by the interaction by exchange with the mean (IEM) mixing model. To validate the present approach, the numerical results obtained by the joint velocity-composition-turbulence frequency PDF model are compared with experimental data in terms of the unconditional and conditional means of mixture fraction, temperature and species and PDFs.

• 한국멀티미디어학회논문지
• /
• 제7권12호
• /
• pp.1639-1649
• /
• 2004

In this paper, a method for detection of forged signatures based on spectral analysis of directional gradient density function and a weighted fuzzy classifier is proposed. The well defined outline of an incoming signature image is extracted in a preprocessing stage which includes noise reduction, automatic thresholding, image restoration and erosion process. The directional gradient density function derived from extracted signature outline is highly related to the overall shape of signature image, and thus its frequency spectrum is used as a feature set. With this spectral feature set, having a property to be invariant in size, shift, and rotation, a weighted fuzzy classifier is evaluated for the verification of freehand and random forgeries. Experiments show that less than 5% averaged error rate can be achieved on a database of 500 signature samples.