• Geomechanics and Engineering
• /
• 제34권2호
• /
• pp.197-208
• /
• 2023

Rate-dependent mechanical response of sand, subjected to loading of medium to high strain rate range, is of interest for several civilian and military applications. Such rate-dependent response can vary significantly based on the initial density state of the sand, applied confining pressure, considered strain rate range, drainage condition and sand morphology. A numerical study has been carried out employing a recently proposed visco-plastic constitutive model to explore the rate-dependent mechanical behaviour of Toyoura sand under drained triaxial loading condition. The model parameters have been calibrated using the experimental data on Toyoura sand available in published literature. Under strain rates higher than a reference strain rate, the simulation results are found to be in good agreement with the experimentally observed characteristic shearing behaviour of sand, which includes increased shear strength, pronounced post-peak softening and suppressed compression. The rate-dependent response, subjected to intermediate strain rate range, has further been assessed in terms of enhancement of peak shear strength and peak friction angle over varying initial density and confining pressure. The simulation results indicate that the rate-induced strength increase is highest for the dense state and such strength enhancements remain nearly independent of the applied confinement level.

• 한국방재안전학회논문집
• /
• 제6권3호
• /
• pp.1-8
• /
• 2013

시간과 공간에 따라 변화하는 난류성분의 변동풍하중을 받는 고층건물의 경량화 및 연성화 현상은 고유진동수와 감쇠비를 적게함으로서 동적으로 매우 불리한 진동문제을 발생하게 되어, 변동풍하중을 받는 도심의 고층건물에 대한 동적해석의 중요성이 인식되고 있다. 본 논문에서는 돌풍과 같이 짧은 시간동안에 통계적 성질이 변화하는 변동풍하중을 나타내기 위하여 정상불규칙 풍하중에 시간에 따라 변화하는 결정적함수(A(t) = 1-exp($-{\beta}t$))를 곱하여 나타냈고, 이러한 변동풍하중을 받는 고층건물에 대한 평균류방향의 동적변위응답해석은 진동이론으로부터 Time-dependent Response Spectral Density함수를 나타냈고, 진동함수를 포함하여 나타내는 Time-dependent Response Spectral Density의 진동수영역에 대한 적분의 해로부터 동적응답을 해석적으로 구하기 위하여 Contour적분에서 Cauchy의 적분정리와 잔유치 정리(residue theorem)에 의한 잔유치 적분으로부터 해석함수를 구했다. 해석 예에서 본 논문에서 구한 해석함수와 기존의 수치해석방법에 따른 결과를 비교 검토했고, 고층건물의 동적 특성에 따른 해석결과도 비교 검토했다.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제25권4호
• /
• pp.345-355
• /
• 2018

This paper looks into phase plane behavior of the solution near the positive steady-state for the system with prey density dependent response functions. The positive invariance and boundedness property of the solution to the objective model are proved. The existence result of a positive steady-state and asymptotic analysis near the positive constant equilibrium for the objective system are of interest. The results of phase plane analysis for the system are proved by observing the asymptotic properties of the solutions. Also some numerical analysis results for the behaviors of the solutions in time are provided.

• 한국세라믹학회지
• /
• 제32권9호
• /
• pp.1047-1055
• /
• 1995

Mn-Zn ferrite granules were formed by a spray-drying method of the slurry containing different kinds and concentrations of binders at various temperatures. The slurry was made by conventional ceramic processing method, that is, by mixing Fe2O3, MnO, ZnO powders (52 : 24 : 24 mol%), calcining and milling. Typical shape of the spray dried granules was spherical. The compaction behavior of these granules was dependent on the spray-drying temperature and the kind and concentration of binders. At lower pressure the granules were displaced and at higher pressure the granules were deformed and fractured to fill pores among the granules. The optimum concentration of the binder was 0.5wt%. The granules containing 0.5wt% PVA 205 were deformed and fractured well and the green density was higher than others. At higher concentrations of the binder the granules were deformed rather than fractured, therefore the green density was lowered because of the remaining unfilled pores. The decomposition temperature and the heat released were increased with increasing the concentration of the binders. The compaction response of the granules containing PVA 205 was more efficient than those containing PVA 217 and PVA 117. Green density was not dependent on the degree of hydrolysis of the binders. The compaction response of the granules spray-dried at 15$0^{\circ}C$ was most efficient.

• 열처리공학회지
• /
• 제35권5호
• /
• pp.255-261
• /
• 2022

In this work, the strain-amplitude independent and strain-amplitude dependent damping capacities of Mg-5%Sn alloy have been investigated as a function of its age-hardening response. The hardness increased with an increase in aging time, reached a peak value after 48 h, and then it gradually decreased. The damping capacities of the Mg-5%Sn alloy exhibited a decreasing tendency in the order of solution-treated, under-aged, peakaged, and over-aged states in the strain-amplitude dependent region, whereas they increased continuously with aging time in the strain-amplitude independent region. The microstructural examination during aging revealed that the lower concentration of Sn solutes in the α-(Mg) matrix and the lower density of the Mg₂Sn precipitate particles may well be the crucial factors for better damping values in the strain-amplitude independent and strain-amplitude dependent regions, respectively.

• Smart Structures and Systems
• /
• 제6권4호
• /
• pp.363-372
• /
• 2010

Accurate peak response estimation of a seismically excited structure with frictional damping system (FDS) is very difficult since the structure with FDS shows nonlinear behavior dependent on the structural period, loading characteristics, and relative magnitude between the frictional force and the excitation load. Previous studies have estimated the peak response of the structure with FDS by replacing a nonlinear system with an equivalent linear one or by employing the response spectrum obtained based on nonlinear time history and statistical analysis. In case that earthquake excitation is defined probabilistically, corresponding response of the structure with FDS becomes to have probabilistic distribution. In this study, nonlinear time history analyses were performed for the structure with FDS subjected to artificial earthquake excitation generated using Kanai-Tajimi filter. An equation for the probability density function (PDF) of the displacement response is proposed by adapting the PDF of the normal distribution. Coefficients of the proposed PDF are obtained by regression of the statistical distribution of the time history responses. Finally, the correlation between the resulting PDFs and statistical response distribution is investigated.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.639-644
• /
• 2007

The accurate peak response estimation of a seismically excited structure with frictional damping system(FDS) is very difficult since the structure with FDS shows nonlinear behavior dependent on the structural period, loading characteristics, and relative magnitude between the frictional force and the excitation load. Previous studies have estimated that by replacing a nonlinear system with an equivalent linear one or by employing the response spectrum obtained based on nonlinear time history and statistical analysis. In the case that on earthquake load is defined with probabilistic characteristics, the corresponding response of the structure with FDS has probabilistic distribution. In this study, nonlinear time history analyses were performed for the structure with FDS subjected to artificial earthquake loads generated using Kanai-Tajimi filter. An equation for the probability density function (PDF) of the displacement response is proposed by adapting the PDF of the normal distribution. Finally, coefficients of the proposed PDF is obtained by regression analysis of the statistical distribution of the time history responses. Finally, the correlation between PDFs and statistical response distribution is presented.

• Bulletin of the Korean Chemical Society
• /
• 제24권8호
• /
• pp.1102-1106
• /
• 2003

In our previous work we developed the Finite Field method in order to calculate the fifth-order Raman response. The method was applied to calculate various polarization components of the two-dimensional response of liquid $CS_2$. So far, all calculations relied on the dipole-induced dipole. Accurate time-dependent density functional theory calculations have shown that this model has big discrepancies, when molecules are close together as in the liquid. We now report results of investigations on the importance of multipole and electron overlap effects on the polarizability and the fifth-order Raman response. It is shown that these collision effects, especially the induced multipoles, are crucial in the description of the fifth-order response. The impact is found to be especially pronounced for the χ_{mmzzzz}^{(5)}$response that is solely due to interaction induced effects. The calculated response will be compared with various experimental results.

• 한국산학기술학회논문지
• /
• 제2권2호
• /
• pp.107-113
• /
• 2001

본 논문은 전단모드와 유동모드 하에서 자기유변유체의 빙햄 및 응답특성 실험을 실시한 것이다. 실험을 위해 전단모드와 유동모드에서 작동하는 두 가지 자기점도계가 제작되었으며, 자기유변유체는 로드사의 MRF-132LD가 사용되었다. 자기장의 변화에 따른 전단응력이 다양한 온도에서 실험적으로 실시되었다. 이로부터 직선보간법을 이용하여 항복전단응력을 도출하였으며, 온도에 따른 변화가 매우 적은 것을 확인했다. 또한 자기유변유체의 사각파에 대한 응답특성이 작동모드에 따라 비교되었다.

• 대한기계학회논문집B
• /
• 제30권11호
• /
• pp.1101-1106
• /
• 2006

To investigate a relation between fine scale eddies and particle dispersion in a near-wall turbulence, direct numerical simulations of turbulent channel flow laden particle are performed for $Re_{\tau}$=180. The motions of 0,8 million particles are calculated for several particle response times ($t_p$) which is the particle response time based on stokes’ friction law. The number density of particles has a tendency to increase with approaching the near-wall regions ($y^+$<20) except for cases of very small and large particle response times (i.e. $t_p$=0.02 and 15). Near the wall, the behavior and distribution of particles are deeply associated with the fine scale eddies, and are dependent on particle response times and a distance from the wall. The Stokes number that causes preferential distribution in turbulence is changed by a distance from the wall. The influential Stokes number based on the Burgers' vortex model is derived by using the time scale of the fine scale eddies. The influential Stokes number is also dependent on a distance from the wall and shows large value in the buffer layer.