• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.385-387
• /
• 2006

We made the logic that can transmit the service data and clock of interest by using the optical signal and demodulate the original signal at the receiving end. Because We can interface the all communications equipment to which We intended to send the signal. We can modulate the dock and clocked data using optical signal and then transmit the original optical signal to the receiving end, finally, arbitrarily control the traffic between ports.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1113-1116
• /
• 1998

This paper presents an efficient hardware architecture of demodulating fingers to demodulate the multi-path propagating signals in MC-CDMA Mobile System. We design a new architecture of demodulating fingers which share the single arithmetic unit to reduce the hardware complexity. This arithmetic unit performs MAC(Multiplication and Accumulation) operations of all demodulating fingers. The proposed architecture is suitable for Is-95 based CDMA PCS system. Three demodulating fingers for MC-CDMA which demodulate 7 channels contain about 42K logic gates. Our proposed system is shown to be very useful for Multi-Code CDMA system in which several channels are demodulated simultaneously.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.3
• /
• pp.239-248
• /
• 2004

Optical coherence tomography(OCT) is high resolution imaging system which can see the cross section of microscopic organs in the living tissue. In this paper, we analyze the relation between the light source and the resolution of modulated signal in Michelson interferometer. We construct 1-D OCT signal processing hardware such as amplifiers, filters, and demodulate electronic signals from the photo detector. In order to get 2-D OCT image, the synchronization among optical delay line, sample stage and A/D converter is dealt with. In experiments, we verify analog and digital signal processing blocks which apply to the stacks of glasses. Finally we aquire high resolution 2-D OCT image with respect to the onion tissue. We expect that this result can be applied to the medical instrument through performance improvement.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.49-52
• /
• 2000

The Multi-Code CDMA systems that are proposed as an effective transmission methodology in the IMT-2000 systems allow higher rate services under the IS-95 CDMA infrastructure. The Multi-Code CDMA systems convert the higher rate data into the lower rate by serial to parallel operation and spread the converted data streams by the multiple walsh codes, and its mobile receiver needs multiple walsh generators and data correlators to demodulate simultaneously multiple walsh code channels. Therefore, the number of data correlators is increased as the number of traffic channels increases. In this paper, we proposed the new structure of the data correlators using walsh overlay coding, the shared accumulator, and FWHT(Fast Walsh Hadamard Transform) algorithm for reducing the bottle-neck effect resulting the increase of the number of data correlators.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.3
• /
• pp.99-105
• /
• 2009

This paper suggests novel signal processing methods for optimal beamforming of smart antenna system in CDMA2000 mobile communication environments. This method utilize characteristics of the reverse pilot channel of CDMA2000 mobile communication systems, and applies them to improve the performance of an adaptive algorithm, which is used to a smart antenna system for beamforming. To perform the best beamforming, it is important to get an exact beamforming algorithm. This paper proposed an algorithm based on Laglange multiplier which has such an adaptive process, and also proposed the method to demodulate the received signal through array antenna using pilot channel in CDMA2000 environment. This paper analysed the enhanced performance of proposed algorithm in various signal environment through signal modeling of physical layer in CDMA2000 reverse link.

• Journal of electromagnetic engineering and science
• /
• v.16 no.4
• /
• pp.214-218
• /
• 2016

In this paper, we present an ambient light backscatter communication design that enables Internet of Things (IoT) devices to communicate through the backscattering ambient light emitted from lighting infrastructure or sunlight. The device can selectively modulate ambient light by switching a liquid crystal display (LCD) shutter located on its surface, so that a nearby smart device, which includes a photodiode or a camera, can demodulate this backscattered light information. To verify the practicality of the proposed concept, we design an IoT device equipped with a commercial LCD shutter and a microcontroller. Our device produces ambient light backscattered data at a speed of 100 bps, and these data are successfully decoded by a commercial photodiode module 10 cm away from the IoT device. We believe that our ambient light backscatter communication design is appropriate for implementation in various IoT applications.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.44-54
• /
• 1996

In DS/SS systems it is necessary to synchronize the locally generated despreading signal with the received spreading signal to demodulate the received signal. The synch process between the two signals is usually accomplished in two steps : first acquisition then tracking. In this paper, an acquisition system aided by the neural network is proposed for the rapid and exact acquisition in DS/SS. the neural netowrk is composed o fthree-layered perpecptrons and trained by the backpropagation algorithm. The performance of the proposed system is analyzed and compared with ones of conventional systems using the sequential estimation technique under an additive while gaussian noisy channel. In all of th econsidered simulations, the proposed system outperforms conventional systems.

• Journal of information and communication convergence engineering
• /
• v.16 no.1
• /
• pp.6-11
• /
• 2018

It is important to find the random estimation points in wireless sensor network. A link quality indicator (LQI) is part of a network management service that is suitable for a ZigBee network and can be used for localization. The current quality of the received signal is referred as LQI. It is a technique to demodulate the received signal by accumulating the magnitude of the error between ideal constellations and the received signal. This proposed model accepts any number of random estimation point in the network and calculated its nearest anchor centroid node pair. Coordinates of the LQI sphere are calculated from the pair and are added iteratively to the initially estimated point. With the help of the LQI and weighted centroid localization, the proposed system finds the position of target node more accurately than the existing system by solving the problems related to higher error in terms of the distance and the deployment of nodes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.10
• /
• pp.2329-2338
• /
• 1997

A conventional digital receiver sampled a baseband signal and processed it digitally for demodulation. But now we can sample at sufficiently high speed a wideband signal to take enough discrete data values due to the advent of economic high-speed ADC. With this technical background, a wideband frequency-division-multiplexed signal can be undersampled and channelized in digital domain by DFT analysis filter using the theory of polyphase. In this paper, we propose a new digital receiver which can digitally process the multichannel received signal by sampling at IF band, develop a mathematical theory and algorithm, and analyze the performance by using C-language simulaation. The proposed receiver can demodulate analog and digital FM signals.

• Journal of Information Processing Systems
• /
• v.14 no.5
• /
• pp.1272-1285
• /
• 2018

The paper presents a novel embedded multifunctional media sever (EMMS) for mobile devices to receive various media programs. Being different from other contemporary system research, the paper mainly studies how to design a reception solution for terrestrial digital television (DTV) on mobile devices and how to enable mobile devices can receive DTV program, enjoy video-on-demand (VOD), achieve video surveillance and relay Internet video program via local Wi-Fi simultaneously. In the system design, we integrate broadcasting-terrestrial DTV tuner, streaming media re-transmission system, VOD disk, video camera and access interface to the Internet into EMMS, which can either receive terrestrial DTV radio signals and demodulate out digital transport stream (TS), or can read streaming media bit-stream from VOD disk, surveillance camera or access interface to the Internet. The experimental results show the proposed system is stable and quality-efficient. Comparing with the other systems, the proposed system has the least packet loss rate and response time.