• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 D
• /
• pp.2411-2413
• /
• 2004

In this paer, we propose a method to apply a decentralized control algorithm for passive velocity field control using virtual flywheel system to cooperative mobile robots. The considered system convey a common rigid object in a horizontal plain. The effectiveness of proposed control algorithm is examined by numerical simulation for cooperative tasks.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.214-217
• /
• 1987

In this paper self tuning control of interconnected systems are dealt in view point of large scale system control. The plant model is given in multiple ARMA process. This process is simplified as independent SISO ARMA process having offset terms. This offset was considered as effects of interconnections. In each decentralized system, self tuning controller with instrumental variable method is adopted. As a result, this algorithm enables the parameter estimation to be unbiased and non-drift. This controller contains a new implicit offset rejection technique. Simulation results considers well with the analysis in case of linear interconnection.

• 제어로봇시스템학회논문지
• /
• 제14권10호
• /
• pp.983-990
• /
• 2008

This paper presents the fault detection and diagnosis(FDD) algorithm to enhance reliability of a longitudinal controller for an autonomous All-Terrain Vehicle(ATV). The FDD is designed to monitor and identify faults which may occur in distributed hardware used for longitudinal control, e.g., DSPs, CAN, sensors, and actuators. The proposed FDD is an integrated approach of decentralized and centralized FDD. While the former is processed in a DSP and suitable to detect faults in a single hardware, it is sensitive to noise and disturbance. On the other hand, the latter is performed via communication and it detects and diagnoses faults through analyzing concurrent performances of multiple hardware modules, but it is limited to isolate faults specifically in terms of components in the single hardware. To compensate for disadvantages of each FDD approach, two layered structure including both decentralized and centralized FDD is proposed and it allows us to make more robust fault detection and more specific fault isolation. The effectiveness of the proposed method will be validated experimentally.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1367-1370
• /
• 2003

PROFIBUS is an open industrial communication network for a wide range of application in manufacturing automation and process control systems. PROFIBUS-DP(Decentralized Peripherals) are mainly used to connect smart automation devices via a fast serial link. PROFIBUS-DP adopts master/slave mechanism for communication service. In this paper, we present an implementation method of the protocol stacks for the master station of PROFIBUS-DP.

• 설비공학논문집
• /
• 제13권12호
• /
• pp.1297-1305
• /
• 2001

In this study, existing control methods that are suggested or applied until now are classified by control parameters, and stability of in the room and floor surface temperatures of each control method is compared through experiments. Then, the control performance of these control methods are analyzed to evaluate the applicability to Korean apartment housing. From the result of the applicability analysis, the outdoor reset with on/off PWM control is found to be desirable for district heating systems and flux modulation is found to be applicable for decentralized heating systems. In the case of independent control systems for each room, on/off PWM control is desirable.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권12호
• /
• pp.689-697
• /
• 2005

In this paper, an application of a decentralized $H_{\infty}$ controller(DHC) to multiple controlled-permanent magnet(CMAG) magnetic levitation(Maglev) systems is presented. The designed DHC using two Riccati equations iteratively has simpler structure and needs less computational loads than conventional centralized $H_{\infty}$ controller. A target plant is a hybrid-type CMAG system with permanent magnet and coil, and its mathematical model is firstly derived to design the DHC. To implement the designed algorithm, a real Maglev vehicle system including digital controller, chopper, sensor, etc., is manufactured. To compare the performances of the DHC method with an observer-based state feedback control(OSFC), the input tracking and disturbance rejection characteristics are experimentally tested. As performance indices(PI), integral of squared error(ISE), integral of absolute error(IAE), integral of time multiplied by absolute error(ITAE) and integral of time multiplied by squared error(ITSE) are used. From the experimental results, it can be seen that the input tracking and disturbance rejection performances of the DHC are better than those of the conventional controller.

• 전자공학회논문지SC
• /
• 제39권5호
• /
• pp.8-17
• /
• 2002

본 논문에서는, 섭동과 제어기 이득 섭동을 갖는 이산 대규모 시간지연 시스템의 강인 비약성 제어기 설계에 관하여 논한다. 리아프보프 해석법을 의거하여 선형행렬 부등식으로 표현되는 주어진 시스템의 강인 안정화를 꾀하는 상태 궤환 제어기의 존재를 보장하는 조건 식을 구한다. 이 조건 식의 해로부터 각 부 시스템에서의 제어기의 이득 및 제어기의 비약성 지수도 얻을 수 있다. 제시된 선형행렬 부등식은 잘 알려진 최적화 기법으로 쉽게 풀 수 있으며, 예제를 통하여 제어기 설계 방법을 보인다.

• 전자공학회논문지SC
• /
• 제47권6호
• /
• pp.64-72
• /
• 2010

본 논문에서는 폴리토프 불확실성과 시간지연, 그리고 제어기 섭동을 가지는 비선형 상호연결시스템의 상태궤환 제어기에 대한 견실비약성 $H_{\infty}$ 분산 퍼지제어기 설계 방법을 다룬다. 먼저 시간지연을 가지는 비선형 상호연결시스템을 Takagi-Sugeno 퍼지모델로 나타내고, 이로부터 지연종속 견실비약성 $H_{\infty}$ 퍼지제어기가 존재하기 위한 충분조건, 제어기 설계방법 및 비약성을 만족하는 제어기의 꽉찬집합(compact set)을 제시한다. 이 때 제시한 조건은 변수치환과 슈어여수(Schur complement)정리를 통해 선형행렬부등식(LMI: Linear Matrix Inequality)의 계수가 꽉찬 집합 내의 파라미터의 함수로 정의되는 파라미터화 선형행렬부등식(PLMIs: Parameterized Linear Matrix Inequalities)으로 표현되며, 이를 완화기법(relaxation technique)를 사용하여 유한개의 선형행렬부등식으로 변환하고, 제어기와 비약성을 만족하는 제어기 영역을 구한다. 마지막으로 예제와 모의실험을 통해 불확실성과 시간지연, 제어기이득 섭동에도 불구하고 제안한 퍼지제어기가 폐루프시스템을 안정화시키고 외란감쇠를 보장함을 확인한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1862-1866
• /
• 2003

A control system design with Coefficient Diagram Method (CDM) is proven that effective for SISO control design. But the control system design for MIMO via CDM is not concrete procedure. In this paper presents the control system design method for quadruple-tank process via CDM. By using the decentralized method for both non-minimum phase and minimum phase are made. The results from Integral-Proportional (I-P) controller’s design via CDM and standard Proportional-Integral (PI) controls are also shown to compare the merits of the proposed controllers.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.230-233
• /
• 1999

This paper is concerned with the design method of a de-centralized linear control system and its application to vibration control of multi degree of freedom structures. The method is based on the partial model matching on frequency domain by minimizing the relative model error functions between the diagonal elements of the open loop transfer function matrix of the control system and these of the reference model. The method is examined and evaluated by both simulation and experiment of a multi degree of freedom structure(MDFS).