• Progress in Medical Physics
• /
• v.11 no.2
• /
• pp.117-122
• /
• 2000

The IP(imaging plate) has been widely used to measure the two-dimensional distribution of incident radiation since it has a high sensitivity, reusability, a wide dynamic range, a high position resolution. Particularly, the easiness of acquiring digitized image using IP poses a strong merit because recent trend of data handling prefers image digitization. In order to test its usefulness in photon beam dosimetry, we measured the off-axis ratio(OAR) on portal planes and percent depth dose(PDD) within a phantom using IP, and compared the results with the data based on EGS4 Monte Carlo particle transport code, ion-chambers, conventional films. For the measurement, we used 6 MV X-rays, various field sizes. As a result, IP showed significant deviation from ion-chamber measurement: a significant overresponse, 100% greater than that of ion-chamber measurement at deep part of the phantom. Filtration of low-energy scattered photons at deep part of the phantom using 0.5 mm thick lead sheets did improve the result, only to the unacceptable extent. However, portal dose measurement showed possibilities of If as a dosimeter by showing errors less than 5%, as compared with film measurement.

• Tunnel and Underground Space
• /
• v.16 no.1 s.60
• /
• pp.50-57
• /
• 2006

Development of structures such as slope and tunnel, waste disposal, oil and LPG storages, and underground power house and so on, is increasing with the year. The method for appropriate estimation of rock state such as fresh or damaged rocks is also requested with increasing structural development. On these purposes, seismic logging system, which is a simple and easy way for handling as well as small and light, has been developed. Seismic logging method is one of logging tests, which is able to evaluate the state of rock mass with various shapes and is possible to obtain the relatively accuracy data at situ state. In addition, seismic logging method is at to apply to estimate structural behavior, before and after support installed. According to the results obtained from this study, firstly, it is clear that the extent of damage in rock slope due to blasting is able to be evaluated with quantity using seismic logging method, moreover to decide the damage zone in rock slope reasonably. Secondly, it is expected that installing depth of support is able to be decided more effectively and economically, using the results of seismic logging data. Finally, seismic logging method is also able to be applied safety supervision of structures, before and after support installed.

• Journal of Korean Society of Transportation
• /
• v.17 no.2
• /
• pp.55-68
• /
• 1999

Many ITS services require map databases in digital form to meet desired needs. Due to the dynamic nature of ITS and the sheer diversity of applications, the design and development of spatial databases to meet those needs pose a major challenge to both the public and private sectors. This challenge is further complicated by the necessity to transfer locationally referenced information between different kinds of databases and spatial data handling systems so that ITS products will work seamlessly across the region and nation. The Purpose of this paper is to develop the framework-models commonly to reference locations in the various applications and systems-the ITS Map Datum and LRS(Location Referencing System). The ITS Map Datum consists of the around control points which are the prime intersections (nodes) of the nationwide road network In this study, the major points have been determined along wish link-node modeling procedure. LRS, defined as a system for determining the position (location) of an entity relative to other entities or to some external frame of reference, has also been set up using CSOM type method. The method has been implemented using ArcView GIS software over the Kangnam and Seocho districts in the city of Seoul, showing that the implemented LRS scheme can be used successfully elsewhere. With the proper advent of the K.ITS architecture and services, the procedure can be used to improve the data sharing and to inter operate among systems, enhancing the efficiency both in terms of money and time.

• Journal of KIISE
• /
• v.41 no.10
• /
• pp.762-773
• /
• 2014

As the web of data is increasingly producing large RDFS datasets, it becomes essential in building scalable reasoning engines over large triples. There have been many researches used expensive distributed framework, such as Hadoop, to reason over large RDFS triples. However, in many cases we are required to handle millions of triples. In such cases, it is not necessary to deploy expensive distributed systems because logic program based reasoners in a single machine can produce similar reasoning performances with that of distributed reasoner using Hadoop. In this paper, we propose a scalable RDFS reasoner using logical programming methods in a single machine and compare our empirical results with that of distributed systems. We show that our logic programming based reasoner using a single machine performs as similar as expensive distributed reasoner does up to 200 million RDFS triples. In addition, we designed a meta data structure by decomposing the ontology triples into separate sectors. Instead of loading all the triples into a single model, we selected an appropriate subset of the triples for each ontology reasoning rule. Unification makes it easy to handle conjunctive queries for RDFS schema reasoning, therefore, we have designed and implemented RDFS axioms using logic programming unifications and efficient conjunctive query handling mechanisms. The throughputs of our approach reached to 166K Triples/sec over LUBM1500 with 200 million triples. It is comparable to that of WebPIE, distributed reasoner using Hadoop and Map Reduce, which performs 185K Triples/sec. We show that it is unnecessary to use the distributed system up to 200 million triples and the performance of logic programming based reasoner in a single machine becomes comparable with that of expensive distributed reasoner which employs Hadoop framework.

• Journal of Internet Computing and Services
• /
• v.12 no.5
• /
• pp.47-61
• /
• 2011

Recently, the importance of digital forensic has been magnified because of the dramatic increase of cyber crimes and the increasing complexity of the investigation of target systems such as PCs, servers, and database systems. Moreover, some systems have to be investigated with live forensic techniques. However, even though live forensic techniques have been improved, they are still vulnerable to anti-forensic activities when the target systems are remotely accessible by criminals or their accomplices. To solve this problem, we first suggest a layer-based model and the anti-forensic scenarios which can actually be applicable to each layer. Our suggested model, the Anti-Forensic Activites layer-based model, has 5 layers - the physical layer, network layer, OS layer, database application layer and data layer. Each layer has possible anti-forensic scenarios with detailed commands. Second, we propose a fuzzy expert system for effectively detecting anti-forensic activities. Some anti-forensic activities are hardly distinguished from normal activities. So, we use fuzzy logic for handling ambiguous data. We make rule sets with extracted commands and their arguments from pre-defined scenarios and the fuzzy expert system learns the rule sets. With this system, we can detect anti-forensic activities in real time when performing live forensic.

• Archives of Plastic Surgery
• /
• v.36 no.2
• /
• pp.188-193
• /
• 2009

Purpose: Several authors reported about the post - traumatic nasal aesthetic complications. However, the study for functional or intra - nasal complications has been reported not enough. The aim of this study is to observe the incidence of intranasal synechia. Methods: We reviewed the data from 401 consecutive patients with nasal bone fracture from september 2006 to December 2007. We enforced evaluation with preoperative CT in all patients but postoperative CT within complicated patients. We classified the nasal bone fracture according to the anatomy and severity of fracture. Type I is nasal tip fracture(15%, n = 59), Type II is simple lateral without septal injury(38%, n = 152), Type III is simple lateral with septal injury(23%, n = 92), Type IV is closed comminuted(20%, n = 82), Type V is open comminuted or complicated(4%, n = 16). We studied 98 patients with nasal bone fracture who had postoperative symptoms or undergone postoperative endoscopic evaluation. And then we evaluated the postoperative endoscopic finding and nasal synechal formation after operation. Results: The incidence of intranasal synechiae was 15%(n = 62). According to the endoscopic findings, the incidence of intranasal synechiae was 10%(n = 6) in Type I, 8%(n = 12) in Type II, 16%(n = 15) in Type III, 24%(n = 20) in Type IV, and 56%(n = 9) in Type V. Additionally, the incidence of subjective nasal obstruction and olfactory dysfunction is 18%(n = 72) and 13%(n = 51). But the incidence of symptomatic synechiae of nasal obstruction and olfactory dysfunction is 92%(57/62) and 55%(34/62). Conclusion: We identified relatively high prevalence of nasal obstruction and olfactory dysfunction in nasal synechiae. Based on the results of this study, intranasal synechiae really caused airway obstruction(92%). Our data showed significant relationship between intranasal synechiae and severity of the fracture, because of increasing mucosal handling and destructive closed reductional procedures. First of all, education of delicate procedure regarding this subject should be empathized accordingly.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.1
• /
• pp.64-74
• /
• 2016

Objectives: The purpose of this study was to investigate whether chemical exposure among workers has relevance to dyspnea using data from the $3^{rd}$ Korea Working Conditions Survey. Methods: The research subjects were 29,711 wage workers. Chemical exposures consist of four factors, (1) breathing in vapors, fumes, dust and dirt, (2) breathing in organic solvent vapors, (3) handling or touching chemicals, and (4) secondhand smoke. Multiple logistic regression analysis was performed to examine the association between chemical exposure and dyspnea in the last 12months using proc surveylogistic in SAS 9.3 statistical software excluding people who had received a diagnosis of hypertension or obesity that can affect the respiratory distress symptoms(n=27,842). Results: Chemical exposure among workers was associated with dyspnea after adjustment for demographics and job characteristics. Prevalence of dyspnea was 4.9 per 1,000 among men and 5.8 per 1,000. Compared to a total score of 0 points of chemical exposure among workers, a total score of 1, 2-3, and 4 points tended to have increased risk of dyspnea in a dose-response manner for both men (OR=1.43, 1.93, and 4.26; P-for trend=0.002) and women(OR=1.10, 2.81, and 7.70; P-for trend=0.002). Stratified analysis by duration of current job showed that the association between chemical exposure and dyspnea tended to get stronger until 15 years and then disappeared afterwards, which reflects healthy worker survivor effect. Conclusions: We observed significant association between chemical exposure and dyspnea using the data of the $3^{rd}$ Korea Working Conditions Survey. Our results warrants providing knowledge related to chemical exposure, performing prevention activities, and creating various health policies to protect workers.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.4
• /
• pp.91-99
• /
• 2005

Flight compatibility certification is performed to substantiate the compatibility between ALQ-X ECM pod and KF-16D/RF-4C aircraft. A certification plan for the ALQ-X flight compatibility is established. Similarity analysis, mass/inertia analysis, structural analysis/test, and ground vibration test/flutter analysis are made to support the safety of MIL-HDBK-1763 Test 250 (Captive compatibility flight profile). Aircraft flew along flight envelope boundary with representative ALQ-X configurations. Handling qualities are evaluated by comparing flight characteristics of the aircraft with and without ALQ-X. Structural integrity and endurance is evaluated using measured flight test data. Results of these flight tests showed that ALQ-X is compatible with KF-16D/RF-4C without altering the flight envelope which has originally been certified for ALQ-88 and ALQ-119 ECM pods. ALQ-X certification program made following technical achievements: Type III certification for foreign designed fighter, flutter analysis program development using GVT results, and utilization of MIL-STD-1553B data bus in flight test.

• Journal of the Korea Society for Simulation
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2015

This research focuses on the method of inventory management to find out the best way in various SCM. There are several comparable methods of inventory management like Min-Max, regular interval, fixed target inventory that have different lead-time and demand for each product. Also, the inventory performances between the case of three-stages and two-stages in SCM are analyzed. 8 scenarios for the simulation are suggested considering order ways and stages. Input data for the simulation is from the result of the previous studies and actual data in the market. The performance measurements are selected as sales revenue, total number of sales, total delivery cost, total inventory shortages, the number of inventory shortage occurrence, the loss for inventory shortages, average inventory, handling cost, net profit. According to the results of the simulation, fixed target inventory management is better than existing inventory management method by net profit and inventory and so on. Also, it was confirmed that the increase in profit is obtained when SCM stages is reduced from three-stages to two-stages in existing SCM. The result of the research provides significant meaning that newly introduced target inventory management system shows good performance and SCM performance can be improved by reducing the stages.

• Journal of Korean Academy of Nursing Administration
• /
• v.12 no.2
• /
• pp.233-246
• /
• 2006

Purpose: The purpose of this study was to examine whether a MBTI based self growth program had any effect on improving the ego identity, self efficacy, interpersonal relations ability and adjustment of nursing students. Method: The subjects in this study were 56 juniors who were majoring in nursing science at H and S college in Chungnam province. At each college, an experimental group and a control group were organized with 26 and 30 students respectively, and the data were gathered at H college from April 6 through May 14, 2004, and at S college from May 31 through July 3, 2004. A MBTI based self growth program was conducted 10 times for five weeks, twice a week and for 120 minutes each. And the ego identity, self efficacy, interpersonal relations ability and adjustment of the selected students were measured and compared to see if that program has any effect on above variables. For data handling, SAS 8.0 program was employed. Fisher's exact test and unpaired t-test were used to confirm whether or not the experimental and control groups were equivalent. Before the experiment, their ego identity, self efficacy, interpersonal relations ability and adjustment were tested by one-way ANOVA and Scheffe's multiple comparison in consideration of their general characteristics, and paired t-test and ANCOVA were utilized to see if that program brought any changes to their ego identity, self efficacy, interpersonal relations ability and adjustments. Result: The findings of the study were as follows; After the MBTI based self growth program was applied, the experimental groups made a significant progress in ego identity than the control groups. And the experimental groups underwent a significantly change in ego identity after the experiment, compared to the control groups. The experimental groups showed a significant improvement in self efficacy than the control group, and the experimental groups showed significant change in self efficacy than the control groups after the experiment. The experimental group showed a significant progress in interpersonal relations ability than the control group did, and the former groups underwent significant change in that regard than the control groups after the experiment. There was no difference in adjustment between the experimental and control groups. The experimental groups showed significant change in adjustment than the control groups after the experiment, but the difference was insignificant. After this program was implemented, the students underwent changes in self understanding, self accepting, understanding others and accepting others. They also had more confidence and more positive self images, and they were better able to tide over difficulties with others. Conclusion: The results of this study suggested that the MBTI based self growth program might serve to enhance the ego identity, self efficacy and interpersonal relations ability of the nursing students and brought inner changes to them. Therefore, the MBTI based self growth program was expected to make a great contribution to the character building of nurses.