• Journal of information and communication convergence engineering
• /
• v.9 no.1
• /
• pp.74-77
• /
• 2011

PSPICE modeling of a commercial LED driver IC (TOP245P) and PC817A optocoupler is proposed for the switch-mode power supply (SMPS) (applicable to LED driver) design and simulation. An analog behavioral model of the TOP245P IC including the shunt regulator, under-voltage(UV) detection, over-voltage(OV) shut-down and SR flip-flop is developed by using PSPICE. The empirical equation of PC817A current transfer ratio (CTR) is fitted from the datasheet of PC817A. Two types of SMPSs are simulated with the averaged-model and switching-model. The simulation results by the proposed PSPICE models are in good agreement with those in the data sheet and an experimental data.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.3
• /
• pp.327-339
• /
• 1986

In this paper, a hardware compiler for symbolic description language(SDL) is proposed for logic design automation. Lexical analysis is performed for SDL which describes the behavioral characteristics of a digital system at the register transfer level by the proposed algorithm I. The algorithm I is proposed to get the expressions for the control unit and for the data transfer unit. In order to obtain the network description language(NDL) expressions equivalent to gate-level logic circuits, another algorithm, the the algorithm II, is proposed. Syntax analysis for the data formed by the algorithm I is also Performed using circuit elements such as D Flip-Flop, 2-input AND, OR, and NOT gates. This SDL hardware compiler is implemented in the programming language C(VAX-11/750(UNIX)), and its efficiency is shown by experiments with logic design examples.

• Journal of the Korean Institute of Navigation
• /
• v.16 no.4
• /
• pp.35-45
• /
• 1992

In this study, an interface is developed in compliance with the standards which is made by National M.E.A in U.S.A for transmitting the Marine Gyrocompass information. The interface consists of Bearing Signal Transfer, Bearing Signal Demodulator, Bearing Signal Discriminator, Bearing Counter and, Informatioin Tranmitter. The results are as follows : The transmission of bearing information was achieved successfully on the Marine RADAR by the interface tranmitting for the Marine Gyrocompass. And, newly proposed phase-detector in Bearing Signal Discriminator which method is forcibly reset the previous data of D-T Flip Flop can be solved the problems of the delay in phase discrimination and the unstableness in the boundary areas of input signal.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.2
• /
• pp.254-259
• /
• 1987

This paper describes the CMOS standard cell library implemented in double metal single poly gate process with 3\ulcornerm design rule, and its results of testing. This standard cell library contains total 33 cells of random logic gates, flip-flop gates and input/output buffers. All of cell was made to have the equal height of 98\ulcornerm, and width in multiple constant grid of 9 \ulcornerm. For cell data base, the electric characteristics of each cell is investigated and delay is characterized in terms of fanout. As the testing results of Ring Oscillator among the cell library, the average delay time for Inverter is 1.05 (ns), and the delay time due to channel routing metal is 0.65(ps)per unit length.

• The KIPS Transactions:PartA
• /
• v.15A no.3
• /
• pp.135-140
• /
• 2008

This paper describes a high-speed CMOS demultiplexer using redundant multi-valued logic (RMVL). The proposed circuit receives serial binary data and is converted to parallel redundant multi-valued data using RMVL. The converted data are reconverted to parallel binary data. By the redundant multi-valued data conversion, the RMVL makes it possible to achieve higher operating speeds than that of a conventional binary logic. The implemented demultiplexer consists of eight integrators. Each integrator is composed of an accumulator, a window comparator, a decoder and a D flip flop. The demultiplexer is designed with TSMC $0.18{\mu}m$ standard CMOS process. The validity and effectiveness are verified through the HSPICE simulation. The demultiplexer is achieved the maximum data rate of 20 Gb/s and the average power consumption of 95.85 mW.

• 한국정보통신설비학회:학술대회논문집
• /
• 2005.08a
• /
• pp.159-165
• /
• 2005

The proposed optical transmitter is composed of FF(flip flop) , PLL (phase locked loop), reference clock generator, serializer and LD driver 10x250 Mb/s data arrays are translated to the 2.5 Gb/s data signal by serializer. In this case, 1 data bus is allocated usually as a reference clock for synchronization. In this proposed optical transmitter, 125 MHz reference clock is generated from 10x250 Mb/s data arrays by reference clock generator. From this method. absent of reference clock bus is available and more data transmission become possible. To achieve high speed operation, the serializer circuit is designed as two stacks. For 10:1 serialization, 10 clocks that have 1/10 lambda differences is essential, so the VCO (voltage controlled oscillator) composed of 10 delay buffers is designed. PLL is for runing at 250 MHz, and dual PFD(phase frequency detector) is adopted for fast locking time. The optical transmitter is designed by using 0.35 um CMOS technology.

• The KIPS Transactions:PartA
• /
• v.14A no.5
• /
• pp.301-308
• /
• 2007

This paper proposes high performance coprocessor architecture for real time dense disparity computation based on a phase-based binocular stereo matching technique called local weighted phase-correlation(LWPC). The algorithm combines the robustness of wavelet based phase difference methods and the basic control strategy of phase correlation methods, which consists of 4 stages. For parallel and efficient hardware implementation, the proposed architecture employs SIMD(Single Instruction Multiple Data Stream) architecture for each functional stage and all stages work on pipelined mode. Such that the newly devised pipelined linear array processor is optimized for the case of row-column image processing eliminating the need for transposed memory while preserving generality and high throughput. The proposed architecture is implemented with Xilinx HDL tool and the required hardware resources are calculated in terms of look up tables, flip flops, slices, and the amount of memory. The result shows the possibility that the proposed architecture can be integrated into one chip while maintaining the processing speed at video rate.

• Journal of IKEEE
• /
• v.14 no.1
• /
• pp.1-7
• /
• 2010

This paper presents an implementation of the DisplayPort AUX(Auxiliary) Channel. DisplayPort uses Main link, AUX Channel and Hot Plug Detect line to transfer the video & audio data. For isochronous transport service, source device converts to image and audio data which are to be transported through the Main Link and transports the restructured image and audio data to sink device. The AUX Channel provides link service and device service for discovering, initializing and maintaining the Main link. Hot Plug Detect line is used to confirm the connection between source device and sink device. The AUX Channel is implemented with 3315 LUTs(Look Up Table), 1466 Flip Flops and 168.782MHz max speed synthesized using Xilinx ISE 9.2i at SoC Master3.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.5
• /
• pp.529-538
• /
• 1992

Recently, image signal processing techniques for HDTV signal have been drastically developed. This kind of skill improvement on signal processing need specific memory device for video signal. in this paper, data latch scheme which implements CMOS flip-flop to hold Information from in-put strobe and new reading method is devised to attain a proper access time suitable for HDTY signal. Compared with conventional write scheme, data latch method has two procedures to complete write operation : bit line write and storage cell write, enabling concurrent I /0 operation at the same address. Also, fast read access is possible through the method similar to static column mode and the separated read word line.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.557-565
• /
• 2020

In order for thermal degradationIn, excore nuclear flux monitoring system, as a monitoring and signal processing methodology of reactor power, monitors neutron pulses generated during nuclear fission as frequency status, and converts them into DC voltage, and then log values resultantly. The methods realy applied in the nuclear power plant are to construct combination of counters and flip-flops, or diodes and capacitors up to now. These methodes are reliable for relative high frequencies, while not credible for reasonable low frequencies or extreme low values. Therefore, we developed the circuit that converts frequencies into DC voltages, into and into log DC values in the wide range from low Hz to several hundred high kHz. We proved their validities through testing them using real data used in nuclear power plant and analyzed their results. And, these methods will be used to measure the neutron level of excore nuclear flux monitoring system in nuclear power plant.