• The monthly packaging world
• /
• s.355
• /
• pp.84-97
• /
• 2022

• Journal of the Korean Society of Safety
• /
• v.8 no.1
• /
• pp.35-46
• /
• 1993

This paper was concerned with the risk assessment about oxidizing substances as dangerous goods by burning test method. The sample. which was formed with the heaped cone-shape. was composed of solid oxidant and sawdust. The burning time of each sample was measured under the following various conditions circumstance temperature. mixing ratio of oxidizing substance and sawdust. particle size of sawdust and kinds of sawdust. As a results. the effective combustibility was gained when the sawdust content was 20∼30 wt.% in the sample and the lauan with -30+50 mesh was used. But. although the circumstance temperature increased. burning efficiency of the samples wet$.$e not affect by it. Finally. the average burning times were obtained by considering the weighting factors related on the mixing ratio and the circumstance temperature. And then. it were compared with the combustion risk level and the effects of cation and anion of oxidizing substances as dangerous goods.

• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.701-711
• /
• 2020

Purpose: In this study, the risk of flammability of a liquid mixture was experimentally confirmed because the purpose of this study was to confirm the increase or decrease of the flammability risk in a mixture of two substances (combustible+combustible) and to present the risk of the mixture. Method: Flash point test method and result processing were tested based on KS M 2010-2008, a tag sealing test method used as a flash point test method for crude oil and petroleum products. The manufacturer of the equipment used in this experiment was Japan's TANAKA. The flash point was measured with a test equipment that satisfies the test standards of KS M 2010 with equipment produced by the company, and LP gas was used as the ignition source and water as the cooling water. In addition, when measuring the flash point, the temperature of the cooling water was tested using cooling water of about 2℃. Results: First of all, in the case of flammable + combustible mixtures, there was little change in flash point if the flash point difference between the two substances was not large, and if the flash point difference between the two substances was low, the flash point tended to increase as the number of substances with high flash point increased. However, in the case of toluene and methanol, the flash point of the mixture was lower than that of the material with a lower flash point. Also, in the case of a paint thinner, it was not easy to predict the flash point of the material because it was composed of a mixture, but as a result of experimental measurement, it was measured between -24℃ and 7℃. Conclusion: The results of this study are to determine the risk of mixtures through experimental studies on flammable mixtures for the purpose of securing the effectiveness of the details of the criteria for determining dangerous goods in the existing dangerous goods safety management method and securing the reliability and reproducibility of the determination of dangerous goods Criteria have been presented, and reference data on experimental criteria for flammable liquids that are regulated in firefighting sites can be provided. In addition, if this study accumulates know-how on differences in test methods, it is expected that it can be used as a basis for research on risk assessment of dangerous goods and as a basis for research on dangerous goods determination.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.6
• /
• pp.649-657
• /
• 2013

In this study, for a proposal of job-based IMDG code expert training model, the training cases of other countries were analyzed comparatively and a questionnaire-survey was conducted to find the needs of workers. As results of comparative analysis, various curriculums were operated by jobs of workers in USA and by kinds of dangerous goods or vehicles in UK, but a common curriculum was provided for various jobs of workers in Korea. It was analyzed that current domestic curriculum is not efficient, and the respondents demand expansion of training including provision of information via web-site as results of questionnaire survey. Therefore, in conclusion, after the shore workers were classified into three groups(on-site worker, office worker, & carrying worker), the customized training program of each group was suggested. Furthermore, this study proposed the regional operation of training course to meet regional demand on education including establishment of on-line curriculums.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.1
• /
• pp.9-16
• /
• 2017

As a preliminary study of enter or leaving traffic patterns of the Korea main port, port Management Information System (Port-MIS) data was used to check the volume of vessels entering and leaving the port of Busan, and three consecutive days from each seasons were selected for study. Selected 12-day General Information Center on Maritime Safety & Security (GICOMS) data was also used to analyze the traffic pattern in the main traffic lane of Busan port for dangerous goods carrier. Also, the distance between dangerous goods carriers and Oryukdo breakwater of east breakwater in the main traffic lane was analyzed. Collision probability was estimated using the cumulative probability distribution function of the normal distribution for the maritime traffic safety audit scheme based on the assumption that a ship's trajectory has a normal distribution for a section of the route. However, in case of entry or leaving thorough the Oryukdo breakwater and entry thorough the east breakwater, ship's sailing trajectories were revealed not to follow a normal distribution via regularity testing using a KS-test and SW-test. Especially in the north port, the tendency of the right side of the ship to pass was remarkable. It is desirable to develop a traffic model suitable for the characteristics of the port rather than to apply general traffic theories, and to apply this model to a maritime traffic safety diagnosis, so further research is needed.

• Journal of Korea Port Economic Association
• /
• v.34 no.2
• /
• pp.31-50
• /
• 2018

This study implemented an empirical analysis of education and training for dangerous goods and hazardous materials handlers on the Busan New Port terminals and hinterland logistics centers using a Structural Equation Modeling (SEM) in combination with the formative model and reflective model, from the viewpoint of the supply chain. An effect size analysis was also conducted. The results of the empirical analysis show that Training Environment and the Atmosphere of Education have a positive influence on the Educational Expectation of hazardous material handlers, and the Educational Expectation has a positive influence on the Education and Training Program and Transfer of Education Training. Likewise, the Education and Training Program has a positive influence on the Transfer of Education Training and Result of Education and Training. Furthermore, the Transfer of Education Training has a positive influence on the Result of Education and Training. The Result of Education and Training has a positive influence on the Present State of hazardous material management. According to the results of the effect size analysis, the following parameters represented a great effect: the Atmosphere of Education to the Education Expectation, the Education Expectation to the Education and Training Program, the Transfer of Education Training to the Result of Education and Training, and the Result of Education and Training to the Present State of Dangerous Goods Management. The results of this study provided various suggestions for related practices.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.7
• /
• pp.767-774
• /
• 2017

Maritime traffic safety audits (MTSA) were enacted in order to ensure marine traffic safety throughout changes or the construction of water facilities, port facilities, etc. After the introduction of MTSA, the scope of subject vessels was restricted to an LOA of more than 100 m or a maximum speed of more than 60 knots as of 2014. In this study, the scope of subject vessels was re-examined in comparison with specific marine traffic safety areas and tanker prohibited areas identified in the maritime safety act. Furthermore, the state of subject vessels and exception cases for MTSA were also analyzed. As a result of these analyses, MTSA were deemed necessary for dangerous goods carriers of more than 1,000 G/T in specific marine traffic safety areas and dangerous goods carriers of more than 794 G/T in tanker prohibited areas. Finally, the necessity of further review was suggested given the present scope of subject vessels.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.3
• /
• pp.393-401
• /
• 2020

According to the research and investigations performed on Port Facilities for cargo-works of hazardous materials around the Port of Busan, a conclusion was drawn that the manually operating foam tower monitors are ineffective as they are hard to access due to the radiant heat under contingency circumstances such as a fire. Moreover, in some cases, the effective range of Foam Tower Monitors are insufficient to reach docked ships and manifolds where hazardous materials are being unloaded. In addition, Dangerous Goods freights are inadequately and inefficiently stored regardless properties of hazardous substances due to complicated local regulations, and some are equipped with inapplicable facilities for docked ships. Therefore, in order to effectively counteract the contingencies and obtain safety, it would be recommended to install adequate facilities.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.191-192
• /
• 2019

The transport market has continued to change to provide services for each cargo. Currently, tank containers are widely used for the transport of liquids, and the tank container transportation market is continuously growing. Accordingly, the demand for handling for tank containers is also increasing. The purpose of this study is to suggest the improvement of transportation process and management method based on the case analysis of the current tank container transportation market. Therefore, this is paper suggests that an integrated system is needed to eliminate the period of information disconnection, secure information continuity, and improve the efficiency of managing dangerous goods.

• Proceedings of KOSOMES biannual meeting
• /
• 2008.05a
• /
• pp.249-255
• /
• 2008

IOn 7th of Dec. 2007, large oil spill took place the seas off the Taean coast caused by the collision between VLCC Hebei Spirit and crane floating barge Samsung-1 and a lot of problems were revealed during response to the accident. The author, accordingly, examined to analyze the cause of this accident on the aspect of spill prevention and presented some preventive measures, such as strictness to the current standard for tug operation, expansion of VTS service area and transfer of the VTS responsibility to Korea Coast Guard, designation of appropriate anchorage per ship's type, cargo and visiting purpose, and special management for dangerous goods carriers.