• 재활복지
• /
• v.20 no.1
• /
• pp.1-22
• /
• 2016

This research aimed to examine the problems in a current national emergency management system that does not consider the disabled in the face of manmade catastrophes and natural disasters, and to conduct an expert opinion survey to explore the direction of disabled-inclusive public disaster management system. As a result of the analysis, the respondents of the survey revealed a need for a designated government department for disaster management systems for the disabled and the experts preferred the Ministry of Public Safety and Security (50%) than the Ministry of Health and Welfare (37.5%). However, 12.5% of the surveyed experts perceived cooperation between the two Ministries, rather than selecting a certain ministry, as necessary to establish a disaster management system for the disabled. Additionally, the experts recognized the response period (43.8%) of the disaster management life cycle to be the most important phase. Thus, at the disaster response period, the experts suggested utilizing an emergency alarm system to effectively rescue the disabled in the face of disaster. Based on this discussion, the paper explores ways to establish a disabled-inclusive public disaster management system.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.2
• /
• pp.167-181
• /
• 2019

Currently, the development of evaluation technology for vibration and shock load characteristics and spent nuclear fuel structural integrity under normal conditions of transport is being conducted in the Republic of Korea. This is the first such research conducted in the Republic of Korea and, thus, previous international studies need to be investigated and will be referred to in the ongoing project. Before 2000, several studies related to measurement of vibration and shock loads on spent nuclear fuel were conducted in the US. US national research institutes conducted uniaxial fuel assembly shaker tests, concrete block tests, and multi-axis fuel assembly tests between 2009 and 2016. In 2017, multi-modal transportation tests including road, sea, and rail transport were also performed by research institutes from the US, Spain and the Republic of Korea. Therefore, test preparation procedures, acceleration and strain measurement results, and finite-element and multi-body dynamics analysis were investigated. Based on the measured strain data, the preliminary conclusion was obtained that the measured strain was too small to cause damage to spent nuclear fuel rods. However, this conclusion is a preliminary conclusion that only reviews part of the results; a detailed review is being conducted in the US. The investigation of international studies on spent nuclear fuel structural integrity tests considering vibration and shock loads under normal conditions of transport in the US will be useful data for the project being conducted in the Republic of Korea.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.3
• /
• pp.321-328
• /
• 2019

The detection performances of the NaI(Tl), $LaBr_3$(Ce) and $CeBr_3$ scintillation detectors, which can be used to rapidly evaluate the major artificial radionuclides deposited on the soil surface in a nuclear accident or radiological emergency, were compared. Detection performance was assessed by calculating the minimum detectable activity (MDA). The detection efficiency of each detector for artificial radionuclides was semi-empirically determined using mathematical modelling and point-like sources having certified radioactivity. The background gamma-ray energy spectrum for MDA evaluation was obtained from relatively wide and flat grassland, and the MDA values of each detector for the major artificial radionuclides that could be released in nuclear accidents were calculated. As a result, the relative MDA values of each detector regarding surface deposition distribution at normal environmental radiation level were evaluated as high in the order of the NaI(Tl), $LaBr_3$(Ce), and $CeBr_3$ detectors. These results were compared based on each detector's intrinsic and measurement environment background, detection efficiency, and energy resolution for the gamma-ray energy region of the radionuclide of interest.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.1
• /
• pp.1-13
• /
• 2019

The accident at the Fukushima Dai-ichi Nuclear Power Plant (FDNPP) resulted in the deposition of large quantities of radionuclides over parts of eastern Japan. Radioactive contaminants have been observed over a large area including forests, cities, rivers and lakes. Due to the strong adsorption of radioactive cesium by soil particles, radioactive cesium migrates with the eroded soil, follows the surface flow paths, and is delivered downstream of population-rich regions and eventually to coastal areas. In this study, we developed a model to simulate the transport of contaminated sediment in a watershed hydrological system and this model was compared with observation data from eroded soil observation instruments located at the Korea Atomic Energy Research Institute. Two methods were applied to analyze the soil particle size distribution of the collected soil samples, including standardized sieve analysis and image analysis methods. Numerical models were developed to simulate the movement of soil along with actual rainfall considering initial saturation, rainfall infiltration, multilayer and rain splash. In the 2019 study, a numerical model will be used to add rainfall shield effect by trees, evaporation effect and shield effects of surface water. An eroded soil observation instrument has been installed near the Wolsong nuclear power plant since 2018 and observation data are being continuously collected. Based on these observations data, we will develop the numerical model to analyze long-term behavior of radionuclides on land as they move from land to rivers, lakes and coastal areas.

• Journal of Korean Society of Disaster and Security
• /
• v.15 no.3
• /
• pp.89-99
• /
• 2022

Bridges are a key infrastructure that underpins economic and social activities. In Korea, bridges began to be built with economic development in the 1970s and were built intensively in the 1980s and 1990s. In recent years, as the number of bridges with a service life of more than 30 years is increasing, continuous maintenance is required to ensure the safety of the bridges. In particular, in order to cope with the aging of bridges, research on technology development such as maintenance using ICT technology, preventive maintenance, life cycle cost reduction, and long life bridge is being actively promoted. This paper presents the results of correlation analysis based on the safety evaluation data of bridges as part of the research on the development of a model for estimating load-carrying capacity of bridges. As a analysis result, indicators highly correlated with the load-carrying capacity of the bridge was derived.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.1
• /
• pp.51-62
• /
• 2020

This study was conducted to develop a method for depth assessment of embedded sources using gamma-spectrum ratio and for the evaluation of field applicability. To this end, Peak to Compton and Peak to valley ratio changes were evaluated according to ¹³⁷Cs, ⁶⁰Co, ¹⁵²Eu point source depth using HPGe detector and MCNP simulation. The effects of measurement distance of PTV and PTC methods were evaluated. Using the results, the source depth assessment equation using the PTC and PTV methods was derived based on the detection distance of 50 cm. In addition, the sensitivity of detection distance changes was assessed when using PTV and PTC methods, and error increased by 3 to 4 cm when detection distance decreased by 20 cm based on 50 cm. However, it was confirmed that if the detection distance was increased to 100 cm, the effects of detection distance were small. And PTV and PTC methods were compared with the two distance measurement method which evaluates the depth of source by the change of net peak counting rate according to the detection distance. As a result of source depth assessment, the PTV and PTC showed a maximum error of 1.87 cm and the two distance measurement method showed maximum error of 2.69 cm. The results of the experiment confirmed that the accuracy of the PTV and PTC methods was higher than two distance measurement. In addition, Sensitivity evaluation by horizontal position error of source has maximum error of less than 25.59 cm for the two distance measurement method. On the other hand, PTV and PTC method showed high accuracy with maximum error of less than 8.04 cm. In addition, the PTC method has lowest standard deviation for the same time measurement, which is expected to enable rapid measurement.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.4
• /
• pp.119-129
• /
• 2009

Building construction trends have been changed dramatically in terms of size and mass. With the need to maximize land usage, there has been an increase in the construction of high-rise buildings. This affects not only the entire construction duration and cost, but also subsequent construction activities, such as work to increase underground facilities and in reclamation land area construction. These types of site conditions require soft ground reinforcement and the proper uplift water pressure treatment. In general, two kinds of methods have been used for uplift water pressure treatment systems. However, there have been some problems arising as the result of a lack of research and analysis on underground construction techniques, and a reliance on experiments over actual survey and analysis of site conditions. This paper focused on the problems of conventional selection procedure, by analyzing drawings and proposing a kind of modeling for a reasonable procedure. The results were applied to OO project as a sample construction case to be verified in this research. The initial plan in the case project was the Rock Anchor System. However, as there were terrible miscalculations of basic site conditions that had an extraordinary influence on the underground water level, such as the site's proximity to the Han-river, it was necessary to change the plan to include apermanent drainage system. This achieved a direct construction cost reduction \ 406,702,000 and a maximum sayings of 4% of operational cost, based on the 50-year building Life Cycle Cost.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.5
• /
• pp.80-88
• /
• 2020

With the issuance of one-week fine dust emergency reduction measures in March 2019, the public's anxiety about fine dust is increasingly growing. In order to assess the application of air purifying plant-based bio-filters to public facilities, this study presented a method for measuring pollutant reduction effects by creating an indoor environment for continuous discharge of particle pollutants and conducted basic studies to verify whether indoor air quality has improved through the system. In this study conducted in a lecture room in spring, the background concentration was created by using mosquito repellent incense as a pollutant one hour before monitoring. Then, according to the schedule, the fine dust reduction capacity was monitored by irrigating for two hours and venting air for one hour. PM₁₀, PM_2.5, and temperature & humidity sensors were installed two meters front of the bio-filters, and velocity probes were installed at the center of the three air vents to conduct time-series monitoring. The average face velocity of three air vents set up in the bio-filter was 0.38±0.16 m/s. Total air-conditioning air volume was calculated at 776.89±320.16㎥/h by applying an air vent area of 0.29m×0.65m after deducing damper area. With the system in operation, average temperature and average relative humidity were maintained at 21.5-22.3℃, and 63.79-73.6%, respectively, which indicates that it satisfies temperature and humidity range of various conditions of preceding studies. When the effects of raising relatively humidity rapidly by operating system's air-conditioning function are used efficiently, it would be possible to reduce indoor fine dust and maintain appropriate relative humidity seasonally. Concentration of fine dust increased the same in all cycles before operating the bio-filter system. After operating the system, in cycle 1 blast section (C-1, β=-3.83, β=-2.45), particulate matters (PM₁₀) were lowered by up to 28.8% or 560.3㎍/㎥ and fine particulate matters (PM_2.5) were reduced by up to 28.0% or 350.0㎍/㎥. Then, the concentration of find dust (PM₁₀, PM_2.5) was reduced by up to 32.6% or 647.0㎍/㎥ and 32.4% or 401.3㎍/㎥ respectively through reduction in cycle 2 blast section (C-2, β=-5.50, β=-3.30) and up to 30.8% or 732.7㎍/㎥ and 31.0% or 459.3㎍/㎥ respectively through reduction in cycle 3 blast section (C-3, β=5.48, β=-3.51). By referring to standards and regulations related to the installation of vegetation bio-filters in public facilities, this study provided plans on how to set up objective performance evaluation environment. By doing so, it was possible to create monitoring infrastructure more objective than a regular lecture room environment and secure relatively reliable data.

• Journal of Technology Innovation
• /
• v.24 no.4
• /
• pp.277-307
• /
• 2016

Since 2011, DCF(Discounted Cash Flow) method has been used initiatively for valuating R&D technology assets in the agricultural food industry and recently technology valuation based on royalties comparison among technology transfer transactions has been also carried out in parallel when evaluating the technology assets such as new seed development technologies. Since the DCF method which has been known until now has many input variables to be estimated, sophisticated estimation has been demanded at the time of technology valuation. In addition, considering more similar trading cases when applying sales transaction comparison or industry norm method based on information of technology transfer royalty, it is an important issue that should be taken into account in the same way in the Agri-Food industry. The main input variables used for technology valuation in the Agri-Food industry are life cycle of technology asset, the financial information related to the Agri-Food industry, discount rate, and technology contribution rate. The latest infrastructure building and data updating related to technology valuation has been carried out on a regular basis in the evaluation organization of the Agri-Food segment. This study verifies the key variables that give the most important impact on the results for the existing technology valuation in the Agri-Food industry and clarifies the difference between the existing valuation result and the outcome by referring the support information that is derived through the latest input information applied in DCF method. In addition, while presenting the scheme to complement fragment information which the latest input data just influence result of technology valuation, we tried to perform comparative analysis between the existing valuation results and the evaluated outcome after the latest of reference data for making a decision the input values to be estimated in DCF. To perform these analyzes, it was first selected the representative cases evaluated past in the Agri-Food industry, applied a sensitivity analysis for input variables based on these selected cases, and then executed a simulation analysis utilizing the key input variables derived from sensitivity analysis. The results of this study is to provide the information which there are the need for modernization of the data related to the input variables that are utilized during valuating technology assets in the Agri-Food sector and for building the infrastructure of the key input variables in DCF. Therefore it is expected to provide more fruitful information about the results of valuation.

• Journal of Environmental Policy
• /
• v.11 no.2
• /
• pp.3-16
• /
• 2012

Objectives of the Korean Environmental Conservation Value Assessment Map (ECVAM) is to evaluate environmental value used in comprehensive environmental information in order to encourage eco-friendly land use and management. The first research was conducted in 2001 to establish the evaluation items and the criteria of the ECVAM, and the first nationwide map was established in the period of 2003 to 2005. The maps are updated annually to reflect environmental changes of land. The evaluation items and the criteria have been modified based on feasibility studies to improve the accuracy of the maps. This study re-evaluated the ECVAMs from 2005 to 2010 with criteria used in current environment and analyzed the changes in the area of the maps in 6 years. This is also an investigation on the maps whether they are appropriate as an index for sustainable environmental monitoring. The result shows that the 1st grade level of the ECVAM area with the highest conservation value had been expanding since 2005. These changes were analyzed in terms of updating the 4th Forest Map (2008) produced once every 10 years, reflecting the new legal protected areas such as Baekdudaegan Protected Area(2010), and the environmental/ecological assessment items such as the National Ecological Network (2009). This mean the ECVAM are a monitoring index that integrates individual environmental indexes including the increase of forest age and diameter due to sustainable management of forest areas, and the change of conservation areas. Therefore, ECVAM can be used as a new index integrating national environmental indicators for monitoring changes of national environment and policy. In order to utilize the ECVAM, improving accuracy and reducing renewal cycle time of thematic maps are required.