• Science of Emotion and Sensibility
• /
• v.7 no.2
• /
• pp.157-161
• /
• 2004

The clothing by bias-cut fabric are outstanding in their shilluettes mainly due to their high level of drapability. The clothing, however, need a specific cutting process for being even trimming line skirts. The 3-D trimming system developed in the study has been successful in making high-quality skirts with extremely even trimming line. The system is expected to make quality apparel in shorter manufacturing time.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2006.09a
• /
• pp.59-79
• /
• 2006

The successful execution of shield tunnelling depends on the cutting ability of cutter. So the selection of shape, size and material of cutter according to geology condition is important work. Since shield tunnelling method was first invented in 1881, the cutting tool for rock has been developed owing to various experiments and researches, the study for soil, however, is insufficient. This paper introduces the shield tunnelling that will be carried out on weathered rock section (920m) of Seoul Subway Line 7 Extension C703. The shape and the material of cutter are discussed required for execution without replacement of cutter tool as well as for advance of excavation efficiency. In addition the estimation method of cutter abrasion in case of excavation on weathered soil is proposed and verified. Specially, the coefficient of abrasion for different soil and cutter is proposed by means of investigation into construction example of foreign country.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.1
• /
• pp.20-25
• /
• 1988

This experiment was conducted to find out the effects of the different cutting height on the chemical composition, energy production and relation of yields of Italian ryegrass, tall fescue and perennial ryegrass swards. It was carried out on the experimental field of Livestock Experiment Station, in Suweon, from Sept. 1986 to May 1987. The results obtained are summarized as follows: 1. Chemical composition and Van Soest fiber contents were slightly different among grasses. But were not same trend with cutting heights. At the late vegetative stage, crude protein and crude fiber content were much more in tall fescue, Ash in perennial ryegrass, E.E. and NFE in Italian ryegrass respectively. NDF, ADF, Hemicellulose, Lignin, Cellulose and Silica contents were much more in tall fescue than the others. 2. DM, DCP, TDN, StE, ME and NEL productions were appeared to high in line with Italian ryegrass, perennial ryegrass and tall fescue. In addition 6 cm cutting height was the most production in Italian ryegrass, 15 cm cutting height was the most production in perennial ryegrass and tall fescue. 3. The much more content of crude protein, the less nonstructural carbohydrate content. The less content of NDF, the much more nonstructural carbohydrate content. Green and dry matter yield before wintering were not influence the green and dry matter yield of the late vegetative stage, but green yield before wintering influenced total green yield.

• Design & Manufacturing
• /
• v.14 no.1
• /
• pp.42-48
• /
• 2020

Titanium alloy has been in the spotlight as a core material in high-tech industries that require high strength and light weight because it has excellent strength and corrosion resistance and strength is higher than that of steel. Therefore, in various industries, existing steel products are intended to be replaced with titanium alloys. Titanium alloys can cause cutting tool breakage during cutting, and heat generated during cutting does not dissipate, accumulates in tools and workpieces, resulting in large wear and tear on thin workpieces. In addition, since titanium alloy is a metal with high chemical activity, the wear of the tool becomes more severe when the cutting speed is high, so machining of titanium bolt through cutting is very disadvantageous in terms of productivity. Therefore, the production of bolts using titanium alloys is being produced through a forging process to improve productivity and product quality. In this paper, hot forging molding analysis was performed on bolts used for fastening automobile parts using Ti-6Al-4V alloy, which is the most commonly used titanium alloy.

• Journal of Fashion Business
• /
• v.1 no.2
• /
• pp.46-54
• /
• 1997

The purpose of this study is to understand women's wear manufacturing industries. First, the study was to investigate the present production systems and how much the automatic facility are by comparing them. This study enhanced more efficient, stable, and suitable work line. This intern will direct the way in which automatic facilities will be created. Second, through this study on the general character of the inspectors, the ratio of impaired goods, and the reasons for unsatisfactory goods, I intended to find out a way to decrease the impaired goods and to produce competitive and high quality goods. The results of the survey can be summarized as follows; 1. The result of the research on the automatic industrial facilities shows that the majority of the factories (77.4%) are 40% below the automatic facility rate. The reasons for this according to order are that was a deficit in money, no reason for expensive machines, and lack of the technique and the number of workers required to handle the machines. 2. At this time, the most required equipments are shown according to its importance; automatic sewing machine, automatic cutting machine, automatic spreading machine, and finishing & pressing machine. So in the women's wear manufacturing industries, they think that they need more automatic cutting machine, automatic spreading machine in the cutting field rather than high price automatic machine in the sewing field such as pattern former, pocket welting, automatic sleeve connecting machine and automatic label connecting machine. 3. The result of the research in the goods quality shows that the average impaired rate is 12.7% at the first inspection. In addition the average rate for complete impaired rate is 1.52%. The line system shows that it has a impaired rate that is double the rate of the pair system. Because of this, the industries plan to combine the line system and pair system to create an improved and suitable production system which can boost the quality and productivity of the goods. 4. The fabric is the main point of the impaired goods. The factors of the impaired goods in manufacturing are the lack of mental abilities of the worker, impaired fabrics and a lack of cooperation in the working system. Furthermore, there is a lack of technique for new material. 5. To prohibit impaired goods in manufacturing, there need to be a way to educate the workers and to enhance the workers' mind on the productive goods. Also there need to increase in the investments of automatic production machines. Finally there need to be a standardized working line. Therefore, there need to be an improvement on the management of the production of goods, the development of technique and an increase in the education for the workers, with this there will be a decrease in impaired goods, and an increase in better quality of goods to enforce the domestic apparel industries.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.2
• /
• pp.65-71
• /
• 2011

This paper shows variations on bandwidth for the 5-microstrip 4-port structure by cutting out part of 2nd and 4th line of 5 lines. In 2nd line case, the bandwidth to pass is decreased by 300MHz and one of two input ports operates in diplexer. Both of 2nd and 4th line cut takes each of two input ports as a diplexer. The bandwidth for 4th line case has almost same bandwidth for the unmodified structure, a bit wider than that of the 2nd line case. Especially the isolation between input and other out port in center frequency of stop band shows 41dB for port 1, 32dB for port 2.

• Journal of the Korean Society of Industry Convergence
• /
• v.13 no.1
• /
• pp.49-54
• /
• 2010

Lean 6 sigma has recently been used to describe a management system which combines lean management and 6 sigma. The marriage between Lean manufacturing and 6 sigma has proven to be a powerful tool for cutting waste and improving the organization operations. Time and quality are the most important metrics in improving any company's production and profit performance. lean 6 sigma is a management innovation for improving production efficiency, process quality, cost reduction, investment efficiency and customer's satisfaction. in this paper, Advanced cell line is builded the home appliance goods of the LCD TV final assembly line of domestic company line, training the multi-skilled man and controlling the production information system based on Lean 6 sigma.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.119-125
• /
• 1999

At Wire Rod Mill Plant, wire is made of the billet produced at continuous casting machine, or rolled bloom produced at billeting mill, and the product can be classified of wire of 5.5${\Phi}$ and bar in coil of 14∼42${\Phi}$ in diameter(bar in coil will be referred to as coil as below). At present, wire is produced at POSCO No.1, 2, 3 WRM, coil at garret line of No. 2 WRM. Head and tail of coil are properly cut and treated to scrap to fulfill the customer's satisfaction. This above cutting is done off line, and small size coil can be cut manually with clipper, large size coil with hydraulic cutter. Nowadays, it is being investigated to cut automatically in line with trimming shear after passing mill stand. At the moment, Because the coil produced at the garret line of No.2 WRM is hot 400∼600$^{\circ}C$ and trimming is done manually with cutter, there are always interference from manual operation or safety problem of bad working condition. Not only because of the diversity of the coil size 14∼42${\Phi}$ in diameter, but because of the rolling speed 2.5∼22m/sec, it is required to be equipped with several trimming shear. But this can be accomplished with only one shear installed proper place at this paper.

• Journal of Forest and Environmental Science
• /
• v.24 no.1
• /
• pp.1-14
• /
• 2008

Clearcutting has been the dominant harvesting method in British Columbia (representing 95% of the total area harvested annually). However forest managers are increasingly recommending the use of alternative silvicultural systems and harvest methods, including various types of partial cutting, to meet ecological and social objectives. In this study we compared harvesting productivity and harvesting costs between treatments through detailed and shift level time studies in 300-350 year-old Interior Cedar-Hemlock stands in British Columbia, Canada. Recommendations for improving operational planning/layout and the implementation of clearcut and partial cutting silvicultural systems were made. Harvesting costs varied in the ground-based clearcut treatments from $10.95/$m^3$ - $15.96/$m^3$ and $16.09/$m^3$ - $16.93/$m^3$ in the group selection treatments. The ground-based group retention treatment had a cost of $13.39/$m^3$, while the cable clearcut had a cost of $15.70/$m^3$. An understanding of the traditional and alternative wood products that could be derived from the harvested timber was imperative to increasing the amount of merchantable volume and reducing the corresponding harvesting costs. Stand damage was greatest in the group selection treatments; however, mechanized felling showed an increase in stand damage over manual felling while grapple skidding showed a decrease in skidding damage compared to line skidding.

• Journal of the Korean Society of Costume
• /
• v.56 no.7 s.107
• /
• pp.152-166
• /
• 2006

The purpose of this study was to make patterns for lingerie look after examining expressive characteristics and constructive elements of lingerie look. As underwear became outerwear, position of wearing, materials, and details had changed, and the phenomenon to expose one's body has increased. The constructive elements found in the lingerie look were classified into silhouette, fastening, dart, and cutting line. Many of corset looks revealed cutting lines such as diagonal, perpendicular, and horizon. Brassiere look used perpendicular rutting lines or horizontal cutting lines passing through the bust point in order to highlight the volume by adding darts. There were styles Of chemise looks that used princess lines or separately added a brassier on the breast. Based on the examination of the elements, a total of four apparel works were created, including one flat pattern and three draping patterns. With new infra-apparel designs and patterns, this study was able to artificially highlight the body and express the beauty of costume through revelation of body. In addition, it explored the possibility that the phenomenon that underwear becomes outerwear may be a new idea of dress designing.