Design & Manufacturing

Korean Society of Die & Mold Engineering (한국금형공학회)
권호 표지

Titanium alloy bolt hot forging process analysis through plastic working analysis

소성 가공 해석을 통한 티타늄 합금 볼트 열간 단조 공정 분석

  • Choi, Doo-Sun (Department of Mechanical Engineering, Inha University) ;
  • Kim, Tae-Min (Department of Mechanical Engineering, Inha University) ;
  • Han, Bong-Seok (Department of Mechanical Engineering, Inha University) ;
  • Han, Yu-Jin (Department of Mechanical Engineering, Inha University) ;
  • Ko, Kang-Ho (Department of Mechanical Engineering, Inha University) ;
  • Park, Jung-Rae (Department of Mechanical Engineering, Inha University) ;
  • Park, Kyu-Bag (Department of Mechanical Engineering, Inha University) ;
  • Lee, Jung-Woo (Department of Mechanical Engineering, Inha University) ;
  • Kim, Do-Un (Department of Mechanical Engineering, Inha University)
  • 최두선 (인하대학교 기계공학과) ;
  • 김태민 (인하대학교 기계공학과) ;
  • 항봉석 (인하대학교 기계공학과) ;
  • 한유진 (인하대학교 기계공학과) ;
  • 고강호 (인하대학교 기계공학과) ;
  • 박정래 (인하대학교 기계공학과) ;
  • 박규백 (인하대학교 기계공학과) ;
  • 이정우 (인하대학교 기계공학과) ;
  • 김도언 (인하대학교 기계공학과)
  • Received : 2020.03.18
  • Accepted : 2020.03.31
  • Published : 2020.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

Titanium alloy has been in the spotlight as a core material in high-tech industries that require high strength and light weight because it has excellent strength and corrosion resistance and strength is higher than that of steel. Therefore, in various industries, existing steel products are intended to be replaced with titanium alloys. Titanium alloys can cause cutting tool breakage during cutting, and heat generated during cutting does not dissipate, accumulates in tools and workpieces, resulting in large wear and tear on thin workpieces. In addition, since titanium alloy is a metal with high chemical activity, the wear of the tool becomes more severe when the cutting speed is high, so machining of titanium bolt through cutting is very disadvantageous in terms of productivity. Therefore, the production of bolts using titanium alloys is being produced through a forging process to improve productivity and product quality. In this paper, hot forging molding analysis was performed on bolts used for fastening automobile parts using Ti-6Al-4V alloy, which is the most commonly used titanium alloy.

Keywords

References

  1. Narutaki, N., Murakoshi, A., Motonishi, S., and Takeyama, H., "Study on Machining of Titanium Alloys," CIRP Annals Manufacturing Technology, Vol. 32, No. 1, pp. 65-69, 1983. https://doi.org/10.1016/S0007-8506(07)63362-9
  2. Hartung, P. D., Kramer, B., and Von Turkovich, B., "Tool Wear in Titanium Machining," CIRP Annals Manufacturing Technology, Vol. 31, No. 1, pp. 75-80, 1982. https://doi.org/10.1016/S0007-8506(07)63272-7
  3. Jawaid, A., Che-Haron, C., and Abdullah, A., "Tool Wear Characteristics in Turning of titanium Alloy Ti-6246," Journal of Materials Processing Technology, Vol. 92, pp. 329-334, 1999.
  4. Kim, J. H., Kim C., "Analysis of Hot Forging Closed-Dies Considering Metal Flow Line and Heat Conduction," Proc. of the KSME Spring Annual Meeting, pp. 538-543, 2009.
  5. K.Biswas and W. A. Knight, "Computer Aided Design of Axisymmetric Hot Forging Dies," Proc. 15th Int. MTDR Conf., pp. 135, 1974.
  6. Akerman and T. Altan, "Recent Developments in Computer-Aided Design of Forging Process," SME Technical Paper, No. 72-110, April, 1972.
  7. Lee, S. R., Lee, Y. G., Park, C. H. and Yang, D. Y., "Optimal Design of Preform in Hot Forging," Proc. of the KSME Spring Annual Meeting (A) pp. 780-785, 2000.
  8. Park, J. G., Hwang, H. S., Lee, S. J., Hong, S. C., Lim, S. H., Lee, K. S. and Lee, K. J., "FE Analysis of Hot Forging Process and Microstructure Prediction for Lower Arm Connector," Trans. of the KSME (A), Vol. 27, No. 7, pp. 1243-1250, 2003.
  9. Byun, H. S., Kim, B. M. and Ko, D. C., "A Study on Transfer Process Design on Hot Forging of Bearing Hub," Proc. of KSPE Autumn Annual Meeting (1), pp. 999-1002, 2005.