Titanium alloy bolt hot forging process analysis through plastic working analysis
![]() |
Choi, Doo-Sun
(Department of Mechanical Engineering, Inha University)
Kim, Tae-Min (Department of Mechanical Engineering, Inha University) Han, Bong-Seok (Department of Mechanical Engineering, Inha University) Han, Yu-Jin (Department of Mechanical Engineering, Inha University) Ko, Kang-Ho (Department of Mechanical Engineering, Inha University) Park, Jung-Rae (Department of Mechanical Engineering, Inha University) Park, Kyu-Bag (Department of Mechanical Engineering, Inha University) Lee, Jung-Woo (Department of Mechanical Engineering, Inha University) Kim, Do-Un (Department of Mechanical Engineering, Inha University) |
1 | Narutaki, N., Murakoshi, A., Motonishi, S., and Takeyama, H., "Study on Machining of Titanium Alloys," CIRP Annals Manufacturing Technology, Vol. 32, No. 1, pp. 65-69, 1983. DOI |
2 | Hartung, P. D., Kramer, B., and Von Turkovich, B., "Tool Wear in Titanium Machining," CIRP Annals Manufacturing Technology, Vol. 31, No. 1, pp. 75-80, 1982. DOI |
3 | Jawaid, A., Che-Haron, C., and Abdullah, A., "Tool Wear Characteristics in Turning of titanium Alloy Ti-6246," Journal of Materials Processing Technology, Vol. 92, pp. 329-334, 1999. |
4 | Kim, J. H., Kim C., "Analysis of Hot Forging Closed-Dies Considering Metal Flow Line and Heat Conduction," Proc. of the KSME Spring Annual Meeting, pp. 538-543, 2009. |
5 | K.Biswas and W. A. Knight, "Computer Aided Design of Axisymmetric Hot Forging Dies," Proc. 15th Int. MTDR Conf., pp. 135, 1974. |
6 | Akerman and T. Altan, "Recent Developments in Computer-Aided Design of Forging Process," SME Technical Paper, No. 72-110, April, 1972. |
7 | Lee, S. R., Lee, Y. G., Park, C. H. and Yang, D. Y., "Optimal Design of Preform in Hot Forging," Proc. of the KSME Spring Annual Meeting (A) pp. 780-785, 2000. |
8 | Park, J. G., Hwang, H. S., Lee, S. J., Hong, S. C., Lim, S. H., Lee, K. S. and Lee, K. J., "FE Analysis of Hot Forging Process and Microstructure Prediction for Lower Arm Connector," Trans. of the KSME (A), Vol. 27, No. 7, pp. 1243-1250, 2003. |
9 | Byun, H. S., Kim, B. M. and Ko, D. C., "A Study on Transfer Process Design on Hot Forging of Bearing Hub," Proc. of KSPE Autumn Annual Meeting (1), pp. 999-1002, 2005. |
![]() |