• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.272-277
• /
• 2004

The elastic waves in the plate are dispersive waves with the characteristics of Lamb waves. However, $S_0$ symmetric mode is less dispersive in the frequency region less than first cut-off frequency. And, in anisotropic plates such as CFRP plates, the propagation velocities vary with the direction. So, the wave vector direction to be the phase velocity direction is not accord with the energy flow direction to be the group velocity direction. In this work, the group velocities of the $S_0$ symmetric mode less than the first cut-off frequency was analyzed with the group velocity dispersion curves in unidirectional CFRP plate. And, the group velocity curve obtained by the group velocity dispersion curves are compared with the measured velocities as varied the propagation direction of the Lamb wave. The measured velocities are good agreement with the corrected group velocity curve except near the fiber direction which is called the cusp region. When the propagation direction is not accorded with the principal axis, the direction of the group velocities declines to the fiber direction in the unidirectional CFRP plates. This implies that the energy propagates preferentially toward fiber direction.

• Journal of Power Electronics
• /
• 제11권3호
• /
• pp.369-374
• /
• 2011

Usually, a LPF (low pass filter) is used in the feedback loop of a SRF (synchronous reference frame) - PLL (phase locked loop) system because the measured grid voltage contains harmonic distortions and sensor noises. In this paper, it is shown that the cut-off frequency of the LPF should be designed to suppress the harmonic ripples contained in the measured voltage. Also, a new design method for the loop gain of the PI-type controller in the SRF-PLL is proposed with consideration of the dynamics of the LPF. As a result, a better transient response can be obtained with the proposed design method. The LPF frequency and the PI controller gain are designed in coordination according to the steady state and dynamic performance requirements. Furthermore, in the proposed method, the controller gain and the LPF cut-off frequency are changed from their normal value to a transient value when a voltage disturbance is detected. This paper shows the feasibility and usefulness of the proposed methods through the computer simulations and experimental results.

• 한국안광학회지
• /
• 제21권1호
• /
• pp.47-51
• /
• 2016

목적: 칼라 필터렌즈를 사용하여 대비감도의 변화를 알아보고 임상에 필요한 매뉴얼을 제시하고자 하였다. 방법: 정상 시각을 가진 성인 남녀 20명을 대상으로 황색, 오렌지색, 녹색 필터렌즈를 사용하여 대비감도를 측정했다. 다섯 개의 공간주파수 2, 4, 6, 8, 10 cpd를 사용하였으며 표적의 노출시간은 33 ms, 233 ms로 설정했다. 결과: 대비감도는 전체적으로 표적의 노출시간이 짧은 33 nm보다 233 ms에서 높게 나타났다(p<0.05). 순간적인 노출(33 ms)에서 대비감도가 가장 높게 나타난 필터렌즈는 2 cpd에서의 황색(1.75 log unit)이었으나 233 ms에서는 8 cpd에서 필터를 삽입하지 않았을 때(1.85 log unit)가 가장 예민한 것으로 나타났지만 황색, 오렌지색 간 차이는 서로 근소하여 통계적 의미는 없었다(p>0.64). 결론: 색수차와 산란현상을 감소시켜 시기능을 개선시키는 황색 계열의 필터렌즈는 시기능 개선을 위한 다양한 목적으로 처방이 되고 있다. 필터렌즈를 처방하기에 앞서 cut off 파장을 고려한 필터렌즈의 특성을 파악하고 사용자의 특성과 필터렌즈의 사용 목적을 분명하게 확인할 것을 제안하는 바이다.

• Journal of Information Display
• /
• 제12권2호
• /
• pp.109-113
• /
• 2011

This paper summarizes the recent fabrication and characterizations of flexible high-speed radio frequency (RF) transistors, PIN-diode single-pole single-throw switches, as well as flexible inductors and capacitors, based on single-crystalline Si nanomembranes transferred on polyethylene terephthalate substrates. Flexible thin-film transistors (TFTs) on plastic substrates have reached RF operation speed with a record cut-off/maximum oscillation frequency ($f_T/f_{max}$) values of 3.8/12 GHz. PIN diode switches exhibit excellent ON/OFF behaviors at high RF frequencies. Flexible inductors and capacitors compatible with high-speed TFT fabrication show resonance frequencies ($f_{res}$) up to 9.1 and 13.5 GHz, respectively. Robust mechanical characteristics were also demonstrated with these high-frequency passives components.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.396-397
• /
• 2011

본 논문은 LTE-Advanced 시스템을 위한 멀티채널을 선택할 수 있는 저역통과필터를 제안한다. 제안하는 필터는 5 MHz, 10 MHz, 그리고 40 MHz의 3가지 모드의 차단주파수를 제공하며 Active-RC 5차 Chebyshev 구조로 설계되었다. 저전력을 확보하면서 40 MHz의 높은 차단 주파수를 확보하기 위해서 부성 저항을 가지는 PMOS Cross-Connection Load를 사용한 연산증폭기를 필터에 적용하였다. 더불어 공정, 전압, 그리고 온도에 의한 각각의 차단주파수 변화에 대응할 수 있도록 각각 3-bit 제어 가능한 튜닝회로를 추가하였다. 제안하는 필터는 $0.13-{\mu}m$ CMOS 공정을 사용하여 설계하였으며 1.2V 전압에서 총 20.2 mW 전력을 소모한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.695-698
• /
• 2003

This paper presents a Si power LDMOSFET for power amplifiers in the 1.8-2.2GHz frequency range for the base station of personal communication systems. To improve the cut-off frequency, the proposed Si power LDMOSFET has small gate to drain capacitance by shielding the electric fields with extended source electrode and forming the field oxide structure in drain region. The proposed Si power LDMOSFET can be used for a power amplifier and it has 32% of power added efficiency and 39.5dBm of output power when the supply voltage is 28V and the operating frequency is 1.9GHz.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.234-237
• /
• 2000

In this paper, a method to implement new Quasi-SOI LDMOSFET is introduced and the electrical characteristics of the device are studied. Key process steps of the device are explained briefly. By performing process and device simulations, electrical characteristics of the device are investigated, with emphasis on the optimization of the tilt angle of p$\^$0/ channel region. The electrical properties of the Quasi-SOI device are compared with those of bulk and SOI devices with the same process parameters. Simulated device characteristics are threshold voltage, off-state leakage current, subthreshold swing, DIBL, output resistance, lattice temperature, I$\_$D/-V$\_$Ds/, and cut-off frequency.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.973-974
• /
• 2013

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.651-652
• /
• 2009

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1998년도 유체기계 연구개발 발표회 논문집
• /
• pp.105-114
• /
• 1998

Flow field and near-field noise of a centrifugal fan has been studied with an efrcient compressible method and STAR-CD. The flow field of the centrifugal fan is assumed two-dimensional. Most of the compressible studies has been done by inviscid solver because viscous simulation shows little difference. The near field noise is estimated in term s of sound pressure level in frequency domain transformed from the computed pressure fluctuations using FFT. The simulation has been done on various design elements such as impeller blade shapes, the number of blades and cut-off clearance. The comparison shows that the number of blades has a significant effect on near-field noise without losing aerodynamic performance.