• Proceedings of the KSR Conference
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.897-904
• /
• 2008

The major objective of this study is to investigate the effective improvement plan for the curve sections in the conventional lines which the tilting train runs on. In order to the speed-up of conventional lines that have many curve lines, there needs a improvement construction of substructure such as the straight or double track work and so on. But in this case, it needs to have a plenty of the cost and the period. Therefore, the tilting train which provides the high-speed service effectively in curve tracks and is operating at abroad, was been studying to be suited to natural features. So, in this paper we investigate the improvement method at the sections only where need the extension of the transition curves, and the present status of them for the effective tiling train service using results which were examined on the preceding study which was the development of track system innovation technology for speed-up of them. And we look forward to playing a decisive role as reference material for the decision of the linear fitness in order to operate effectively on the conventional lines for the commercial service of the tilting train, on the basis of checking out the sufficient condition concerned in the track alignment and the velocity which are required in the railway construction rules and the design criteria.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제9권2호
• /
• pp.29-43
• /
• 2005

We consider a surface reconstruction problem from geometrical points (i.e., points given without any order) distributed on a series of smooth parallel cross sections in ${\mathbb{R}}^3$. To solve the problem, we utilize the natural points ordering method in ${\mathbb{R}}^2$, described in [18], which is a method of reconstructing a curve from a set of sample points and is based on the concept of diffusion motions of a small object from one point to the other point. With only the information of the positions of these geometrical points, we construct an acceptable surface consisting of triangular facets using a heuristic algorithm to link a pair of parallel cross-sections constructed via the natural points ordering method. We show numerical simulations for the proposed algorithm with some sets of sample points.

• Korean Journal of Computational Design and Engineering
• /
• 제5권4호
• /
• pp.336-346
• /
• 2000

This paper presents a geometric method that can detect and compute all conic sections in the intersection of two tori. Conic sections contained in a torus must be circles. Thus, when two tori intersect in a conic section, the intersection curve must be a circle as well. Circles in a torus are classified into profile circles, cross-sectional circlet, and Yvone-Villarceau circles. Based on a geometric classification of these circles, we present a procedural method that can detect and construct all intersection circles between two tori. All computations can be carried out using simple geometric operations only: e.g., circle-circle intersections, circle-line intersections, vector additions, and inner products. Consequently, this simple structure makes our algorithm robust and efficient, which is an important advantage of our geometric approach over other conventional methods of surface intersection.

• International Journal of Highway Engineering
• /
• 제15권1호
• /
• pp.95-102
• /
• 2013

PURPOSES: The existing method evaluating the existence of the hollows in concrete pavement does not consider the stiffness of pavement. In addition, the method uses unreasonable logic judging the hollow existence by the deflection caused by zero loading. In this study, the deflection of slab corner due to heavy weight deflectometer (HWD) was measured in concrete pavement sections where underground structures are located causing the hollows around them. METHODS: The modulus of subgrade reaction obtained by comparing the actual deflection of slab to the result of finite element analysis was calibrated into the composite modulus of subgrade reaction. The radius of relative stiffness was calculated, and the relationship between the ratio of HWD load to the radius of relative stiffness and the slab deflection was expressed as the curve of secondary degree. RESULTS: The trends of the model coefficients showing width and maximum value of the curve of secondary degree were analyzed by categorizing the pavement sections into three groups : hollows exist, additional investigation is necessary, and hollows do not exist. CONCLUSIONS: The results analyzed by the method developed in this study was compared to the results analyzed by existing method. The model developed in this study will be verified by analyzing the data obtained in other sections with different pavement structure and materials.

• International Journal of Highway Engineering
• /
• 제10권2호
• /
• pp.135-143
• /
• 2008

According to the present highway design criteria, there are minimum standards which re ade from special design speeds. If some highways are satisfied the standards, it regards he highway as safety. In reality, however, most drivers drive a car at different speed compared with design speed. It is very dangerous for drivers especially at transition sections between curve and horizontal curve sections. Hence, this study calculated the rate of changing and horizontal acceleration at each section. Moreover, this study evaluated thesafety of design at curve transition sections and then calculated lateral acceleration and curve radii. This study found the minimum standards which are using as basic safety standards are not appropriate for measuring driver's safety.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.174-177
• /
• 2007

In this paper the noise characteristics of metro train is investigated experimentally. It is primarily aimed at observing the squealing noise radiation of each wheel when the vehicle pass the curve sections. This will be used to understand the noise excitation mechanism at the contact area between squealing wheels and rails which induce squeal noise at curve sections. To identify the related key parameters and boundary conditions on-board monitorings of the noise, vibration of the wheel and bogie and displacement behaviour of the wheels and rails have been done. In this paper only noise measurement and results are discussed. From spectrogramms squeal noise due to creepage and noise due to flange contact of the wheels could be identified. At the moment of the curve passing the highest squeal levels are found on the front inner wheel. However since curve noise depends on variable factors more analyses will be followed to identify the squealing wheels and the noise excitation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• 제11권1호
• /
• pp.1-6
• /
• 1993

The cant has setted up wrong in a part of railway curve sections, occasionally confusion occur in curve maintenance. In this study, it is suggest effective maintenance method in railway curve section about the radius of curvature, cant successive diminution length, according to the investigation of cant value, compare and analysis with straight decrease in order theory.

• Journal of Korean Society of Transportation
• /
• 제20권3호
• /
• pp.115-128
• /
• 2002

Dislike the tangent sections, the horizontal curve sections of roads should be designed, considering several factors : one of such factors is widening. In other words, since widening results from that when a vehicle runs on the horizontal curve sections, the rear wheels of the vehicle run not along with tracks of the front wheels but out of that, such offtracking should be exactly investigated and reflected in design of the curve sections. Especially in the case of industrial roads which semi-trailers and large trucks run frequently or arterial roads with small curve radiuses in mountainous regions. serious offtracking Phenomenons result in increasing the risk of accidents. decreasing the capacities and jeopardizing pedestrians' safety on the curve sections. For the offtracking, widening amounts of roads has been determined under the traditional presumption that vehicles run at a low speed and there is no superelevation. In fact, however, since the vehicles run at a high speed as well as at a low speed and the superelevation is installed on the horizontal curve sections in the structural aspect of roads, the existing standards for installing widening have a limitation to reflect exactly actual Phenomenons. In particular, for articulated wheel axles of a tractor and a trailer and long articulated vehicles, not only the offtracking degree is very high but also the interpretation shows different aspects from one of single axles. Comparing and reviewing the results of Korean and foreign studies related to the trailer offtracking model theory and the standards for installing widening, this study developed a realistic dynamic offtracking model which considers geometric structures of roads and speeds of vehicles, suggested how to measure widening with this model and examined applicability of the model. The findings of this study are as follows ; First. a dynamic offtracking model. which considers dynamic movements of a tractor and a trailer and the superelevation, was developed. Second, a new method to measure widening with the developed dynamic offtracking model was developed and a method to measure widening with swept path width was suggested as well. Finally, validity of the current standards for installing widening was examined by determining actual offtracking and widening amounts with the developed model and the applicability was investigated through the case studies. Compared with the existing offtracking models, the dynamic offtracking model developed in this study can reflect practically vehicle speed. dimension and geometric structural aspects of roads. In conclusion, the meaning of this study is that it reviews validity of the current standards for installing widening and provides a base to establish such standards by suggesting new methods to measure the widening with this dynamic offtracking model.

• 한국도로학회:학술대회논문집
• /
• 한국도로학회 2004년도 학술발표회 논문집
• /
• pp.449-456
• /
• 2004

• Journal of Korean Society of Transportation
• /
• 제20권2호
• /
• pp.191-191
• /
• 2002