Browse > Article
http://dx.doi.org/10.7855/IJHE.2013.15.1.095

A Method for Evaluation of Hollow Existence in Sublayers of Concrete Pavement Considering Pavement Stiffness  

Sohn, Dueck Su (한국도로공사 도로교통연구원)
Lee, Jae Hoon (한국도로공사 도로교통연구원)
Jeong, Ho Seong (인하대학교 토목공학과)
Park, Joo Young (인하대학교 토목공학과)
Jeong, Jin Hoon (인하대학교 토목공학과)
Publication Information
International Journal of Highway Engineering / v.15, no.1, 2013 , pp. 95-102 More about this Journal
Abstract
PURPOSES: The existing method evaluating the existence of the hollows in concrete pavement does not consider the stiffness of pavement. In addition, the method uses unreasonable logic judging the hollow existence by the deflection caused by zero loading. In this study, the deflection of slab corner due to heavy weight deflectometer (HWD) was measured in concrete pavement sections where underground structures are located causing the hollows around them. METHODS: The modulus of subgrade reaction obtained by comparing the actual deflection of slab to the result of finite element analysis was calibrated into the composite modulus of subgrade reaction. The radius of relative stiffness was calculated, and the relationship between the ratio of HWD load to the radius of relative stiffness and the slab deflection was expressed as the curve of secondary degree. RESULTS: The trends of the model coefficients showing width and maximum value of the curve of secondary degree were analyzed by categorizing the pavement sections into three groups : hollows exist, additional investigation is necessary, and hollows do not exist. CONCLUSIONS: The results analyzed by the method developed in this study was compared to the results analyzed by existing method. The model developed in this study will be verified by analyzing the data obtained in other sections with different pavement structure and materials.
Keywords
concrete pavement; hollow; underground structure; radius of relative stiffness; curve of secondary degree;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 AASHTO, 1986, AASHTO Guide for Design of Pavement Structures, AASHTO, Washington DC.
2 AASHTO, 1993, AASHTO Guide for Design of Pavement Structures, AASHTO, Washington DC.
3 Tayabji, S.D. and Lukanen, E.O., 2000, Nondestructive Testing of Pavements and Backcalculation of Moduli: Third Volume, ASTM STP 1375, pp. 231-294.
4 Westergaard, H.M, 1927, Theory of Concrete Pavement Design, Proceedings of Highway Research Board, Part 1, pp. 175-181.
5 Park, J.Y., Sohn, D.S., Lee, J.H., and Jeong, J.H., 2012, A study on Joint Position at Concrete Pavement with Box Culverts, International Journal of Highway Engineering, Vol. 14, pp. 45-53. (박주영, 손덕수, 이재훈, 정진훈 (2012). "박스 암거가 통과하는 콘크리트 포장의 줄눈 위치에 관한 연구", 한국 도로학회 논문집, 한국도로학회, 제 14권, 제 2호, pp. 45-53.)
6 Woo, J.W., 2001, Void Detection under Jointed Concrete Pavement using FWD, Master Thesis, Hanyang University, Korea. (우정원 (2001). FWD를 이용한 줄눈콘크리트 포장하부의 공동 추정, 석사학위논문, 한양대학교.)
7 Yoo, T.S., Han, S.H., Yeom, S.G., 2004, Development of Structural Evaluation Guidelines for Portland Cement Concrete Pavement, Research Report, Highway & Transportation Technology Institute, Korea Highway Corporation, Korea. (유태석, 한승환, 염상국 (2004). 콘크리트 포장의 구조적 평가 를 위한 기준 연구, 2004년도 연구보고서, 한국도로공사 도로교통기술원.)
8 KEC, 2009, Expressway Construction Standard, Korea Expressway Corporation, Korea. (한국도로공사 (2009). 고속도로 건설공사 표준도, 한국도로공사)
9 Han, S.H., Kwon, S.M., and Um, I.S., 2000, Enhanced Performance of Reinforced Concrete Pavement Slabs Adjacent to the Backfill of Box Culverts, Research Report, Highway Research Institute, Korea Highway Corporation, Korea. (한승환, 권순민, 엄인섭 (2000). 박스암거상부 콘크리트 포장체의 보강방안 개선 연구. 2000년도 연구보고서. 한국도로공사 도로연구소.)